Acquisition of Dynamic Material Properties in the Electrohydraulic Forming Process Using Artificial Neural Network
Open Access
Abstract
Electrohydraulic forming is a high-velocity forming process that deforms sheet metals with velocities above 100 m/s and strain rates more than 100 s−1. This experiment was conducted in a closed space because of safety concerns related to the high-velocity conditions; therefore, we were not able to examine the deformation process of the sheet metal. To observe the electrohydraulic forming process in detail, we performed virtual numerical simulations using accurate material properties. Therefore, in this paper, we obtained the material property of a sheet metal from a numerical estimation by using a surrogate model based on the reduced order model and the artificial neural network. The Cowper–Symonds constitutive equation was selected for the Al 6061-T6 sheet metal, and two strain rate parameters were adopted as the unknown parameters. From the two sampling techniques, the training and test samples were extracted from the specific ranges of two unknown parameters, and a numerical simulation was performed for these samples by using the LS-DYNA program. The z-axis displacements of the deformed sheet metal were obtained from the results of the numerical simulation, and two basis vectors were extracted by using principal component analysis. In addition, to predict the weighting coefficients of the two basis vectors at the defined range of parameters, we used the artificial neural network technique as a surrogate model. By comparing the surrogate model and the experimental results and calculating the root mean square error value, we estimated the optimal parameter for Al 6061-T6. Finally, the reliability of the obtained material parameters was proved by comparing the experimental results, the surrogate model, and LS-DYNA.Keywords
This publication has 21 references indexed in Scilit:
- Numerical and experimental testing of vehicle tyre under impulse loading conditionsInternational Journal of Mechanical Sciences, 2016
- Formability of dual phase steels in electrohydraulic formingJournal of Materials Processing Technology, 2013
- Effect of quasi-static prestrain on the formability of dual phase steels in electrohydraulic formingJournal of Manufacturing Processes, 2013
- Expansion of a Low Conductive Metal Tube by an Electromagnetic Forming Process: Finite Element ModelingMetals and Materials International, 2008
- Reduced-order fluid/structure modeling of a complete aircraft configurationComputer Methods in Applied Mechanics and Engineering, 2006
- Rocket Nozzle Flow Control Using a Reduced-Order Computational Fluid Dynamics ModelJournal of Guidance, Control, and Dynamics, 2002
- A Comparison of Three Methods for Selecting Values of Input Variables in the Analysis of Output From a Computer CodeTechnometrics, 2000
- A logical calculus of the ideas immanent in nervous activity. 1943.1990
- The Levenberg-Marquardt algorithm: Implementation and theory1978
- A logical calculus of the ideas immanent in nervous activityBulletin of Mathematical Biology, 1943