A 66.7fs-Integrated-Jitter Fractional-N Digital PLL Based on a Resistive-Inverse-Constant-Slope DTC
Authors:
- 21 April 2024
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Abstract
Modern fractional-N PLLs used as low-jitter local oscillators for wireless systems generally adopt a digital-to-time converter (DTC) to cancel-out the quantization-error (QE) induced by dithering the modulus control of the frequency divider in feedback [1], [2], [4], [5]. Unfortunately, DTC non-linearity distorts the QE sequence fed to DTC input, thus causing significant fractional spurs at the PLL output and limiting spectral purity and jitter (Fig. 1 top). The inverse-constant-slope DTC (ICS-DTC), recently introduced in [1], has improved linearity over prior-art DTC architectures; however, this comes at the price of a larger DTC jitter, caused by the current generators (CGs) adopted in that circuit. This work introduces an 8. 75–1 0.25GHz fractional-N digital PLL leveraging a resistor-based ICS-DTC circuit, which significantly improves phase-noise while retaining high-linearity. The implemented PLL prototype achieves 66. $7\text{fs}$ rms jitter (including spurs), -63.BdBc fractional spur and - 108 $5\text{dBc}/\text{Hz}$ in-band phase noise (PN) at $10\text{kHz}$ offset, using a $125\text{MHz}$ reference frequency.
Keywords
This publication has 4 references indexed in Scilit:
- A 6.5-to-8GHz Cascaded Dual-Fractional-N Digital PLL Achieving -63.7dBc Fractional Spurs with 50MHz Reference2023
- 4.3 A 76.7fs-lntegrated-Jitter and −71.9dBc In-Band Fractional-Spur Bang-Bang Digital PLL Based on an Inverse-Constant-Slope DTC and FCW Subtractive Dithering2023
- 4.5 A 9.25GHz Digital PLL with Fractional-Spur Cancellation Based on a Multi-DTC Topology2023
- 32.2 A 14nm Analog Sampling Fractional-N PLL with a Digital-to-Time Converter Range-Reduction Technique Achieving 80fs Integrated Jitter and 93fs at Near-Integer Channels2021