Flexural Performance of concrete beams strengthened with textile reinforced mortars: Influence of application pattern and repair mortar type
- 15 October 2025
- journal article
- Published by Omer Halisdemir Universitesi in Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi
- Vol. 14 (4) , 1282-1292
Abstract
This study examines the effectiveness of textile-reinforced mortar (TRM) systems incorporating a ground granulated blast furnace slag-based geopolymer mortar and a commercially available cement-based repair mortar in enhancing the flexural performance of normal-strength concrete beams. TRM applications were implemented with varying coverage patterns and surface areas, while steel fibers were added to the concrete mixtures at dosages of 0.3% and 0.6% by volume for comparative purposes. Experimental evaluations—including flexural strength, load–displacement behavior, initial stiffness, ductility, and energy dissipation capacity—revealed that full-coverage TRM applications enhanced load-bearing capacity by up to 24%. Geopolymer-based TRM systems exhibited comparable or even superior performance to their cement-based counterparts under both full and partial coverage conditions. While the incorporation of 0.6% steel fiber contributed to modest improvements in ductility and energy absorption, it also resulted in a significant reduction in initial stiffness. These findings highlight that TRM systems—particularly when applied with optimized coverage geometry and appropriate binder type—constitute an effective and sustainable strategy for improving the flexural response of reinforced concrete elements.Keywords
Funding Information
- Yoktur.
This publication has 28 references indexed in Scilit:
- Effects of curing temperatures and waste marble aggregates on the properties of geopolymer mortars produced with industrial by-products and waste baked clay powdersAdvanced Powder Technology, 2025
- The effect of cupola furnace iron slag on the physical and mechanical properties of alkali-activated fly ash-based mortarsJournal of the Australian Ceramic Society, 2025
- The effect of elevated temperature on the properties of SCC’s produced with different types of fibersConstruction and Building Materials, 2022
- Evaluation of slag/fly ash based geopolymer concrete with steel, polypropylene and polyamide fibersConstruction and Building Materials, 2022
- Flexural behavior of concrete slabs strengthened with textile reinforced geopolymer mortarComposite Structures, 2022
- Fresh and rheological characteristics of fiber reinforced concrete——A reviewConstruction and Building Materials, 2021
- Fiber-to-mortar bond behavior in TRM composites: Effect of embedded length and fiber configurationComposites Part B: Engineering, 2018
- Bond between textile-reinforced mortar (TRM) and concrete substrates: Experimental investigationComposites Part B: Engineering, 2016
- Mechanical performance of self-compacting concrete reinforced with steel fibersConstruction and Building Materials, 2014
- In-plane retrofitting of masonry panels with fibre reinforced composite materialsConstruction and Building Materials, 2011