Characterisation of Cu/Cu bonding using self-assembled monolayer
- 3 April 2018
- journal article
- conference paper
- Published by Emerald Publishing in Soldering & Surface Mount Technology
- Vol. 30 (2) , 106-111
Abstract
Purpose: Cu/Cu diffusion bonding is characterised by high electrical and thermal conductivity, as well as the mechanical strength of the interconnects. But despite a number of advantages, Cu oxidises readily upon exposure to air. To break through the adsorbed oxide-layer high temperature and pressure, long bonding time and inert gas atmosphere are required during the bonding process. This paper aims to present the implementation of an organic self-assembled monolayer (SAM) as a temporary protective coating that inhibits Cu oxidation. Design/methodology/approach: Information concerning elemental composition of the Cu surface has been yielded by X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared (FTIR) spectroscopy. Two types of substrates (electroplated and sputtered Cu) are prepared for thermocompression bonding in two different ways. In the first case, Cu is cleaned with dilute sulphuric acid to remove native copper oxide. In the second case, passivation with SAM followed the cleaning step with dilute sulphuric acid. Shear strength, fracture surface, microstructure of the received Cu/Cu interconnects are investigated after the bonding procedure. Findings: The XPS method revealed that SAM can retard Cu from oxidation on air for at least 12 h. SAM passivation on the substrates with sputtered Cu appears to have better quality than on the electroplated ones. This derives from the results of the shear strength tests and scanning electron microscopy (SEM) imaging of Cu/Cu interconnects cross sections. SAM passivation improved the bonding quality of the interconnects with sputtered Cu in comparison to the cleaned samples without passivation. Originality/value: The Cu/Cu bonding procedure was optimised by a novel preparation method using SAMs which enables storage and bonding of Si-dies with Cu microbumps at air conditions while remaining a good-quality interconnect. The passivation revealed to be advantageous for the smooth surfaces. SEM and shear strength tests showed improved bonding quality for the passivated bottom dies with sputtered Cu in comparison to the samples without SAM.Keywords
This publication has 12 references indexed in Scilit:
- Cu passivation with self-assembled monolayers for direct metal bonding in 3D integration2017
- A Metal Bump Bonding Method Using Ag Nanoparticles as Intermediate LayerJournal of Electronic Materials, 2015
- Low Temperature Wafer-Level Metal Thermo-Compression Bonding Technology for 3D Integration2012
- Mechanism of wettability transition in copper metal foams: From superhydrophilic to hydrophobicApplied Surface Science, 2012
- Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Sc, Ti, V, Cu and ZnApplied Surface Science, 2010
- High density Cu-Cu interconnect bonding for 3-D integration2009
- Oxidation protection of copper surfaces using self-assembled monolayers of octadecanethiolApplied Surface Science, 2005
- Self-Assembled Monolayers of Thiolates on Metals as a Form of NanotechnologyChemical Reviews, 2005
- Raman spectra of single crystal CuOSolid State Communications, 1990
- Diffusion-related behaviour of gold in thin film systemsGold Bulletin, 1979