Heavy Metal Removal from Synthetic Solutions with Magnetic Beads Under Magnetic Field
- 19 June 2008
- journal article
- research article
- Published by Taylor & Francis in Journal of Macromolecular Science, Part A
- Vol. 45 (8) , 635-642
Abstract
The aim of this study is to prepare magnetic beads which can be used for the removal of heavy metal ions from synthetic solutions. Magnetic poly(ethylene glycol dimethacrylate‐vinyl imidazole) [m‐poly(EGDMA‐VIM)] beads were produced by suspension polymerization in the presence of magnetite Fe3O4 nano‐powder. The specific surface area of the m‐poly(EGDMA‐VIM) beads was found to be 63.1 m2/g with a size range of 150–200 µm in diameter and the swelling ratio was 85%. The average Fe3O4 content of the resulting m‐poly(EGDMA‐VIM) beads was 12.4%. The maximum binding capacities of the m‐poly(EGDMA‐VIM) beads were 32.4 mg/g for Cu2+, 45.8 mg/g for Zn2+, 84.2 mg/g for Cd2+and 134.5 mg/g for Pb2+. The affinity order on mass basis is Pb2+>Cd2+>Zn2+>Cu2+. Equilibrium data agreed well with the Langmuir model. pH significantly affected the binding capacity of the magnetic beads. Binding of heavy metal ions from synthetic wastewater was also studied. The binding capacities were 26.2 mg/g for Cu2+, 33.7 mg/g for Zn2+, 54.7 mg/g for Cd2+ and 108.4 mg/g for Pb2+. The magnetic beads could be regenerated up to about 97% by treating with 0.1 M HNO3. These features make m‐poly(EGDMA‐VIM) beads a potential candidate for support of heavy metal removal under magnetic field.Keywords
This publication has 33 references indexed in Scilit:
- Selective Separation of Thorium Using Ion Imprinted Chitosan‐Phthalate Particles via Solid Phase ExtractionSeparation Science and Technology, 2006
- Synthesis and characterization of poly(ethylene glycol dimethacrylate–1‐vinyl‐1,2,4‐triazole) copolymer beads for heavy‐metal removalJournal of Applied Polymer Science, 2006
- Protein‐imprinted soft‐wet gel composite microspheres with magnetic susceptibility. II. CharacteristicsJournal of Applied Polymer Science, 2005
- Pathogenic antibody removal using magnetically stabilized fluidized bedJournal of Chromatography B, 2005
- Methacryloylamidoglutamic acid functionalized poly(2-hydroxyethyl methacrylate) beads for UO22+ removalReactive and Functional Polymers, 2004
- Preconcentration of copper on ion-selective imprinted polymer microbeadsAnalytica Chimica Acta, 2003
- Preparation and characterisation of a poly(acrylamidoglycolic acid-co-acrylamide) hydrogel for selective binding of Cu2+ and application to diffusive gradients in thin films measurementsPolymer, 2002
- Synthesis and characterisation of a polyacrylamide–polyacrylic acid copolymer hydrogel for environmental analysis of Cu and CdReactive and Functional Polymers, 2002
- Polymer-supported reagents for the selective complexation of metal ions: an overviewReactive and Functional Polymers, 1998
- Chromium(III) removal by poly(ethyleneimine) granular sorbents made by a new process of templated gel fillingReactive and Functional Polymers, 1997