Simultaneous measurement of five-degree-of-freedoms error motion of rotary axis based on multi-principle fusion method
Open Access
- 26 June 2025
- journal article
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 36 (7) , 075003
Abstract
This paper proposes a method for the simultaneous measurement of five-degree-of-freedoms error motions of a rotary axis based on multi-principle fusion, including the curved edge diffraction principle, auto-collimation principle, and laser triangulation principle. The proposed measurement system comprises laser sources, beam splitters, a right-angle mirror, photodiode detectors (PDs), a plane mirror, four-quadrant PDs, and mechanical structures. Mathematical models are established for these three optical measurement methods. The calibration results indicate that the radial displacement residual range is ±0.38 μm within a measurement range of ±30 μm, the axial displacement residual range is ±0.46 μm within ±20 μm, and the tilt angle residual range is ±0.40 arcsec within ±50 arcsec. Experimental tests conducted on a DD motor show that the radial error motion range is −0.727–0.644 μm, the axial error motion range is −4.053–5.876 μm, and the tilt error motion ranges around X-axis is −2.728–4.851 arcsec and around Y-axis is −4.728–3.872 arcsec, respectively.Keywords
Funding Information
- National Key Research and Development Program of China (Grant No. 2022YFF0705702)
- The National Natural Science Foundation of China (Grant No. 51927811)
This publication has 31 references indexed in Scilit:
- Geometric errors identification of the machine tool rotary axes considering R-test theoretical model constraintsDiscover Applied Sciences, 2025
- Synchronous Measurement and Verification of the Position-Independent Geometric Errors of Dual Rotary Axes on Five-axis Machine ToolsInternational Journal of Precision Engineering and Manufacturing, 2025
- Separation of All Motion Errors in a Rotary Motor Using Dual Rotary EncodersInternational Journal of Precision Engineering and Manufacturing, 2024
- Interference-enhanced micro-vision-based single-shot imaging of five degrees-of-freedom error motions for ultra-precision rotary axesInternational Journal of Machine Tools and Manufacture, 2024
- A systemic approach to identify the volumetric and dynamic errors for five-axis machine tools with double ball-bar testThe International Journal of Advanced Manufacturing Technology, 2024
- Vision measurement system for position-dependent geometric error calibration of five-axis machine toolsThe International Journal of Advanced Manufacturing Technology, 2022
- Measurement method of spindle motion error based on composite laser targetInternational Journal of Machine Tools and Manufacture, 2022
- Self-calibration of rotary axis and linear axes error motions by an automated on-machine probing test cycleThe International Journal of Advanced Manufacturing Technology, 2020
- Measurement of spindle radial error based on target trajectory trackingMeasurement, 2019
- Measurement of Spindle Tilt Error Based on Interference FringeInternational Journal of Precision Engineering and Manufacturing, 2019