Study on the effect of geometrical and operational parameters on performance dynamics of modified rotary blades using DEM
Open Access
- 20 August 2024
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-21
Abstract
The geometric features and operational parameters of rotary blades on rotary tillers significantly impact their performance characteristics. The sweepback angle is a geometric feature of the 'L'-shaped rotary blade that has remained unexplored in previous studies. This study aimed to analyze the effect of geometrical and operational parameters on the performance dynamics of the 'L'-shaped rotary blade. The investigation was conducted using the discrete element method (DEM) and further validated through experiments conducted in a soil bin. The simulation experiment was conducted by dividing the particle bed into horizontal particle zones. The effect of the geometrical (sweepback angle) and operational parameters (forward speed, rotational speed, and depth) on the power requirement, disturbance intensity, and mixing index was studied. The novel method was adopted to determine the mixing capability of rotary blades in terms of sub-domain mixing index (SMI) and overall mixing index (OMI). The results revealed that the power requirements for a sweepback angle of 18° were 26.39% and 16.50% lower than those for sweepback angles of 6° and 12°, respectively. The sweepback angle tends to have the least effect on the overall mixing index compared to operational parameters. The average particle velocity decreased by 22.19% and 29.60% with sweepback angles of 12° and 18°, respectively, compared to the sweepback angle of 6°. The relative error during the experiment varied between 1.29% and 13.51%. It was concluded that the sweepback angle was found to be a feasible option for reducing the power requirement with good mixing indices.Keywords
All Related Versions
Funding Information
- University of Pecs
This publication has 44 references indexed in Scilit:
- Quantitative assessment and optimization of parallel contact model for flexible paddy straw: a definitive screening and central composite design approach using discrete element methodScientific Reports, 2024
- Research and experiment on the trenching performance of orchard trenching deviceScientific Reports, 2023
- Bo-LSTM based cross-sectional profile sequence progressive prediction method for metal tube rotate draw bendingAdvanced Engineering Informatics, 2023
- Calibrating contact parameters of typical rotary tillage components cutting soil based on different simulation methodsScientific Reports, 2023
- Parametric study and calibration of hysteretic spring and linear cohesion contact models for cohesive soils using definitive screening designComputational Particle Mechanics, 2022
- Biomimetic Rotary Tillage Blade Design for Reduced Torque and Energy RequirementApplied Bionics and Biomechanics, 2021
- Prediction of precise subsoiling based on analytical method, discrete element simulation and experimental data from soil binScientific Reports, 2021
- Simulation of tillage forces and furrow profile during soil-mouldboard plough interaction using discrete element modellingBiosystems Engineering, 2020
- Torque and energy characteristics for strip-tillage cultivation when cutting furrows using three designs of rotary bladeBiosystems Engineering, 2015
- Development of a Rotary Tiller Blade using Three-dimensional Computer GraphicsBiosystems Engineering, 2004