Multi-rise time PWM: A way to reduce PD exposure in motor windings
Author:
- 25 March 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 27 (2) , 613-621
Abstract
Decreasing the rise time of pulse width modulated waveforms (PWM) has been observed to reduce the life length of high voltage motors. To solve this problem, the advantages of employing multilevel PWM waveforms with adjustable rise times operating above partial discharge inception are discussed in this paper. Examples of how the voltage supply circuits can be designed to enable investigation of this well as measured results are presented. To elucidate this approach, it is investigated what influence the choice of inverter levels has on the partial discharge (PD) characteristics within motor winding material applying adjustable rise times. The test objects were fed from either three- or four level inverter voltage waveforms to resemble realistic stress conditions as in field application. Presented experimental results show that the total peak and summed PD magnitude (exposure) drops considerably when applying a longer rise time at the critical voltage flanks and is shown to reduce the wear of the winding insulation material, showing the consistency between PD pattern and wear. It is further suggested that the presence of PDs can be eliminated by adjusting the rise times at the most critical voltage flanks and thus enhance the life of the machine winding. The presented principles can be implemented for various PWM pattern.Keywords
This publication has 13 references indexed in Scilit:
- Partial discharges in twisted-pair magnet wires subject to multilevel PWM pulsesIEEE Transactions on Dielectrics and Electrical Insulation, 2017
- Characteristics of PD under square wave voltages and their influence on motor insulation enduranceIEEE Transactions on Dielectrics and Electrical Insulation, 2015
- Charge decay on enamel wire surface2014
- The influence of repetitive square wave voltage parameters on enameled wire enduranceIEEE Transactions on Dielectrics and Electrical Insulation, 2014
- Silicon Carbide Power Transistors: A New Era in Power Electronics Is InitiatedIEEE Industrial Electronics Magazine, 2012
- Study of an Inductive Sensor for Measuring High Frequency Current PulsesIEEE Transactions on Instrumentation and Measurement, 2010
- A Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction MotorsIEEE Transactions on Industry Applications, 2010
- A Review of Stator Fault Monitoring Techniques of Induction MotorsIEEE Transactions on Energy Conversion, 2005
- The contribution of discharge area variation to partial discharge patterns in disc-voidsJournal of Physics D: Applied Physics, 2004
- Advances in Online Monitoring and Localization of Partial Discharges in Large Rotating MachinesIEEE Transactions on Energy Conversion, 2004