Characteristics of PD under square wave voltages and their influence on motor insulation endurance
Authors:
- 1 December 2015
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 22 (6) , 3079-3086
Abstract
This paper reviews results of partial discharge measurements and accelerated life tests performed on models of random and form wound insulation systems subjected to impulse voltage waveforms. The goal is to highlight how the features of the supply voltage affect the partial discharge activity and how this, eventually, reflects on the endurance of the insulation system. The most salient results are that, for both types of insulation systems, short rise times trigger PD of large magnitude, which are able to erode the insulation system faster than the partial discharges incepted using waveforms with longer rise times. In particular, failure times estimated by tests under sinusoidal voltages can be overly optimistic in assessing the long-term behavior of the insulation system subjected to impulse voltage waveforms. Frequency also is very important, as it controls the interplay between physical and chemical degradation rates. As a result, above partial discharge inception voltage the frequency acceleration rule does not hold, and can lead therefore to excessively optimistic results.Keywords
This publication has 13 references indexed in Scilit:
- The influence of repetitive square wave voltage parameters on enameled wire enduranceIEEE Transactions on Dielectrics and Electrical Insulation, 2014
- Effect of rise time on PD pulse features under repetitive square wave voltagesIEEE Transactions on Dielectrics and Electrical Insulation, 2013
- Impact of inverter drives employing fast-switching devices on form-wound AC machine stator coil stress gradingIEEE Electrical Insulation Magazine, 2007
- Theory of inception mechanism and growth of defect-induced damage in polyethylene cable insulationJournal of Applied Physics, 2005
- Effect of surge voltage risetime on the insulation of low-voltage machines fed by PWM convertersIEEE Transactions on Industry Applications, 1998
- Failure mechanism of winding insulations in inverter-fed motorsIEEE Electrical Insulation Magazine, 1997
- Nanoscopic aspects of electronic aging in dielectricsIEEE Transactions on Dielectrics and Electrical Insulation, 1997
- Failure mechanism of the interturn insulation of low voltage electric machines fed by pulse-controlled invertersIEEE Electrical Insulation Magazine, 1996
- Effect of physico-chemical degradation of epoxy resin on partial discharge behaviorIEEE Transactions on Dielectrics and Electrical Insulation, 1995
- Measurement and simulation of PD in epoxy voidsIEEE Transactions on Dielectrics and Electrical Insulation, 1995