Comparison of the effects of microwave and spark plasma sintering on the electrical, thermal, and mechanical properties of Cu-LaB6 nanocomposites
- 18 September 2021
- journal article
- research article
- Published by Gumushane University Journal of Science and Technology Institute in Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi
Abstract
Çalışmada, nano lantan heksaborid (LaB6) partiküllerinin, mikrodalga sinterleme (MS) ve kıvılcım plazma sinterleme (SPS) işlemleri kullanılarak üretilen bakır esaslı nanokompozitlerin (Cu-LaB6) elektriksel, ısıl ve mekanik özellikleri üzerine etkileri araştırılmıştır. Nano LaB6 partikülleri, MS ve SPS ile üretilen Cu matrisli nanokompozitlerin elektrik iletkenliğini sırasıyla % 20 ve % 13 oranında azalmasına neden olmuştur. Cu-LaB6 nanokompozitleri, takviyesiz Cu'dan daha düşük termal iletkenliğe sahip olmuştur. SPS metodu ile üretilen Cu-LaB6 nanokompozitinin elektriksel ve ısıl iletkenlikleri, MS ile üretilen Cu-LaB6 nanokompozitinden daha yüksek olmuştur. Nanokompozitlerin ısıl iletkenliğini elektriksel iletkenliklerinden hesaplayabilmek için partikül hacim oranını ve gözenekliliği dikkate alan bir denklem geliştirilmiştir. Cu-LaB6 nanokompozitler için hesaplanan ısıl iletkenlik değerleri deneysel sonuçlara oldukça yakın sonuçlar vermiştir. Cu-LaB6 nanokompozitleri, takviye edilmemiş Cu malzemelere göre sırasıyla % 49 ve % 38 oranında daha yüksek sertliğe ve basma dayanımına sahip olmuştur. SPS yöntemi ile üretilen Cu-LaB6 nanokompozitinin sertliği ve basma dayanımı, MS ile üretilen Cu-LaB6 nanokompozitinden daha yüksek olmuştur. Nano LaB6 partiküllerinin, Cu'nun elektriksel ve ısıl iletkenliklerinin bir miktar düşmesine neden olmasına rağmen, nano LaB6 partikülleri ile SPS işleminin olumlu etkileri biraraya getirilerek, yüksek sertlik ve basma dayanımına sahip Cu-LaB6 nanokompozit üretilmiştir. The effects of lanthanum hexaboride (LaB6) nano-particles on the electrical, thermal, and mechanical properties of copper-based nanocomposites (Cu-LaB6) produced using microwave sintering (MS) and spark plasma sintering (SPS) processes were investigated in this study. Nano LaB6 particles reduced the electrical conductivity of Cu matrix nanocomposites produced via MS and SPS by 20% and 13%, respectively. Cu-LaB6 nanocomposites had lower thermal conductivity than unreinforced Cu. The electrical and thermal conductivities of the Cu-LaB6 nanocomposite produced by the SPS process were higher than those of the Cu-LaB6 nanocomposite produced by the MS process. An equation that takes particle volume ratio and porosity into account was developed to predict the thermal conductivity of nanocomposites from their electrical conductivity. The calculated thermal conductivity values for Cu-LaB6 nanocomposites were very close to the experimental results. Cu-LaB6 nanocomposites had much higher hardness and compressive strength by 49% and 38%, respectively, compared to those of unreinforced Cu. The hardness and compressive strength of the Cu-LaB6 nanocomposite produced by SPS were higher than those of the Cu-LaB6 nanocomposite manufactured via MS. Although nano LaB6 reinforcement particles reduced the electrical and thermal conductivities of Cu, Cu-LaB6 nanocomposite having high hardness and compressive strength were produced by combining the positive influences of nano LaB6 reinforcement particles and the SPS process.Keywords
This publication has 37 references indexed in Scilit:
- Evaluation of the microstructure, thermal and mechanical properties of Cu/SiC nanocomposites fabricated by mechanical alloyingInternational Journal of Minerals, Metallurgy and Materials, 2020
- Electro-discharge sintering of nanocrystalline NdFeB magnets: process parameters, microstructure, and the resulting magnetic propertiesJournal of Materials Science: Materials in Electronics, 2020
- Microstructure and Mechanical Properties of Cu Matrix Composites Reinforced by TiB2/TiN Ceramic ReinforcementsActa Metallurgica Sinica (English Letters), 2020
- Spark Plasma Sintering: Process Fundamentals2019
- Effect of ZrO2 content on properties of Cu-ZrO2 nanocomposites synthesized by optimized high energy ball millingCeramics International, 2019
- Effect of nano ZrO2 on strengthening and electrical properties of Cu-matrix nanocomposits prepared by mechanical alloyingCeramics International, 2017
- Thermal and Electrical Conductivity of 99.9% Pure Copper Processed via Selective Electron Beam MeltingAdvanced Engineering Materials, 2016
- Processing and properties of Cu based micro- and nano-compositesBulletin of Materials Science, 2014
- Investigation of microstructure and mechanical properties of nano MgO reinforced Al composites manufactured by stir casting and powder metallurgy methods: A comparative studyComposites Part B: Engineering, 2014
- Spark plasma and microwave sintering of Al6061 and Al2124 alloysInternational Journal of Minerals, Metallurgy and Materials, 2013