Key Technologies of Dynamic Flume Test for Earthquake Induced Rock Avalanches
- 16 May 2011
- conference paper
- Published by American Society of Civil Engineers (ASCE)
- p. 173-179
Abstract
Model test plays an important role in the research of rock avalanches. However, there is a problem that test results are sometimes too scattered to establish a trend. A series of small-scale flume tests on shaking table were conducted to analyze the influencing effects of dynamic factors acting on the rock avalanches, and the similar problem was found. Efforts were paid to obtain much more reasonable test results by adopting adjustments for operations, especially those that would affect the test results with high sensitivity. It was found that releasing geometry performed a much more obvious influence on the results in the dynamic tests than in the static tests and acquired a sample emplacement method with higher standard. Some individual particles would be forced out of the flume by shaking, with much higher speed than in static tests. Attention should be paid to recycle these particles, or it would result in shorter run-out in the next tests. Besides, attentions were suggested to pay in many manual operations which were regards as key technologies of the tests, such as sample arrangement, vibration applying and sample releasing, run-out measurement, et al. The introductions of the operating techniques in our tests would form a basis for future test design and help to understand the mechanism of earthquake induced rock avalanches.Keywords
This publication has 11 references indexed in Scilit:
- Laboratory Flume Static and Dynamic Experiment for Rock Avalanches2010
- Flow experiments with gravel and blocks at small scale to investigate parameters and mechanisms involved in rock avalanchesEngineering Geology, 2009
- Flow characteristics of 2-phase granular mass flows from model flume testsEngineering Geology, 2008
- The Hattian Bala rock avalanche and associated landslides triggered by the Kashmir Earthquake of 8 October 2005Engineering Geology, 2007
- Qualitative Analysis of Rock Avalanches Propagation by Means of Physical Modelling of Non-Constrained Gravel FlowsRock Mechanics and Rock Engineering, 2007
- Laboratory Granular Flows generated by Slope FailuresRock Mechanics and Rock Engineering, 2007
- Landslide fluidization process by flume experimentsEngineering Geology, 2002
- Fluidization in dry landslidesEngineering Geology, 2000
- Runout of dry granular avalanchesCanadian Geotechnical Journal, 1999
- Experiments on granular flows to predict avalanche runupCanadian Geotechnical Journal, 1995