Abstract
The perception of the omnipresence of microplastic in the environment has been followed by the need of analytical improvements to detect and quantify this pollution. Pyrolysis-gas chromatography-mass spectrometry (pyr-GC-MS) has been emerging as a promising alternative. For a robust quantification of microplastic by pyr-GC-MS, it is essential to improve our understanding of the aspects that interfere in the pyrolysis of microplastics. In this work we investigate the effects of different matrices and the polymer molecular weight on the pyr-GC-MS analysis of polystyrene (PS) microplastics. Besides, we also evaluated the effectiveness of adding poly(4-fluorostyrene) (PSF) as an internal standard to minimize the matrix effects. The three main markers of PS pyrolysis, i.e., styrene, styrene dimer and styrene trimer, were monitored. In general, the ratio between dimer and trimer significantly varied between the matrices and tended to decrease with the increasing of the organic carbon content in the soil. A strong matrix effect affected the slope of the calibrations curves from 2 to 8-fold, but this effect was largely mitigated when the areas of the PS markers were normalized by the area of the corresponding markers of PSF. PS of low molecular weight (Mw 35,000) presented a reduced formation of the all three markers when compared to PS of high molecular weight (Mw 400,000), and styrene-dimer was proportionally less formed than the other two markers. Differences in the slopes of the calibration curves built with each polymer type were depended on the marker chosen and might lead to quantification errors in a 5-fold magnitude. In conclusion, in the absence of an internal standard, external calibration curves should be avoided, and the standard addition method arises as an alternative. Likewise, the development of reference materials for the study of microplastic pollution should encompass the complexity of the microstructure of the target analyte, including various molecular structures, such as molecular weights.