Aline Reis de Carvalho
Research Subjects
Research Interests
Aline Reis de Carvalho has a total of 74 co-authors. Here are the top co-authors by number of shared publications:
Julien Cucherousset
UMR 5174 EDB (Laboratoire Évolution and Diversité Biologique), CNRS, Université Toulouse III Paul Sabatier, IRD, 118 Route de Narbonne, 31062, Toulouse, France
5 shared publicationsLouna Riem-Galliano
UMR 5174 EDB (Laboratoire Évolution and Diversité Biologique), CNRS, Université Toulouse III Paul Sabatier, IRD, 118 Route de Narbonne, 31062, Toulouse, France
5 shared publications- Alexandra ter Halle
Laboratoire Softmat, Université de Toulouse, CNRS UMR 5623, Université Toulouse III - Paul Sabatier, Toulouse, France
4 shared publications - Vinicius Figueiredo Sardela
LBCD-LADETEC, Instituto de Química, Universidade Federal do Rio de Janeiro, Rio de Janeiro, Brazil
3 shared publications Alexandra ter Halle
CNRS, Université Toulouse III - Paul Sabatier, UMR 5623 Laboratoire des Interactions Moléculaires et Réactivité Chimique et Photochimique (IMRCP), 118 route de Narbonne, Toulouse 31062, France
2 shared publicationsFlavien Garcia
UMR 5623 IMRCP (Laboratoire des Interactions Moléculaires et Réactivité Chimique et Photochimique), CNRS, Université Toulouse III Paul Sabatier, 118 route de Narbonne, 31062 Toulouse, France; UMR 5174 EDB (Laboratoire Évolution and Diversité Biologique), CNRS, Université Toulouse III Paul Sabatier, 118 route de Narbonne, 31062 Toulouse, France
2 shared publications
Latest Publications
- Open Access
- 25 June 2025
- Published by EDP Sciences in Knowledge & Management of Aquatic Ecosystems
- No. 426,p. 19
Addressing chemical contamination from floating photovoltaic systems: the need for comprehensive analytical monitoring
Floating photovoltaic (FPV) systems are gaining attention as an innovative solution for renewable energy generation. Their implementation offers significant advantages, such as efficient land use and enhanced solar panel performance due to cooling effects from the water. However, potential chemical contamination from FPV systems requires careful investigation. Metals like lead, silver, and chromium, may be released from photovoltaic structures. The backsheet and coating materials, composed of (fluoro)polymers, might introduce per- or polyfluorinated substances (PFAS) into the water. Additionally, plastic floats can degrade over time, releasing smaller plastic particles and polymer additives such as UV stabilizers and antioxidants into the water. The long-term environmental impact of FPV system materials, including the transformation products that may emerge over their prolonged lifespan, remains underexplored. Given the potential diversity of contaminants that can be introduced into the water, comprehensive analytical strategies are needed to assess their presence and behavior. Non-target analysis, which enables compound identification without prior knowledge, and target approaches play a crucial role in detecting emerging and known contaminants besides tracking their evolution over time. These analytical strategies support environmental policy and early warning systems in planning appropriate mitigation measures. This article highlights the need for extensive research into the environmental impacts of FPV systems, emphasizing the importance of detecting contaminants emerging from their deployment and weathering. Addressing these concerns ensures that the benefits of renewable energy technologies align with aquatic ecosystems protection and water quality, ultimately supporting sustainable development.
- 25 June 2025
- Published by EDP Sciences in Knowledge & Management of Aquatic Ecosystems
- No. 426,p. 19
Open AccessAddressing chemical contamination from floating photovoltaic systems: the need for comprehensive analytical monitoring
Floating photovoltaic (FPV) systems are gaining attention as an innovative solution for renewable energy generation. Their implementation offers significant advantages, such as efficient land use and enhanced solar panel performance due to cooling effects from the water. However, potential chemical contamination from FPV systems requires careful investigation. Metals like lead, silver, and chromium, may be released from photovoltaic structures. The backsheet and coating materials, composed of (fluoro)polymers, might introduce per- or polyfluorinated substances (PFAS) into the water. Additionally, plastic floats can degrade over time, releasing smaller plastic particles and polymer additives such as UV stabilizers and antioxidants into the water. The long-term environmental impact of FPV system materials, including the transformation products that may emerge over their prolonged lifespan, remains underexplored. Given the potential diversity of contaminants that can be introduced into the water, comprehensive analytical strategies are needed to assess their presence and behavior. Non-target analysis, which enables compound identification without prior knowledge, and target approaches play a crucial role in detecting emerging and known contaminants besides tracking their evolution over time. These analytical strategies support environmental policy and early warning systems in planning appropriate mitigation measures. This article highlights the need for extensive research into the environmental impacts of FPV systems, emphasizing the importance of detecting contaminants emerging from their deployment and weathering. Addressing these concerns ensures that the benefits of renewable energy technologies align with aquatic ecosystems protection and water quality, ultimately supporting sustainable development.
- Open Access
- 29 April 2025
- Published by Elsevier in Chemosphere
- Vol. 380, 144449
Quantification of per- and polyfluoroalkyl substances (PFAS) in air emissions: An interlaboratory comparison
- 29 April 2025
- Published by Elsevier in Chemosphere
- Vol. 380, 144449
Open AccessQuantification of per- and polyfluoroalkyl substances (PFAS) in air emissions: An interlaboratory comparison
- 15 July 2022
- Published by Elsevier in Environmental Pollution
- Vol. 309, 119760
Interactive effect of urbanization and flood in modulating microplastic pollution in rivers
- 15 July 2022
- Published by Elsevier in Environmental Pollution
- Vol. 309, 119760
Interactive effect of urbanization and flood in modulating microplastic pollution in rivers
- Open Access
- 16 June 2022
- Published by Wiley in Ecology and Evolution
- Vol. 12 (6) , e8986
Promoting lab culture to enhance academic resilience during crises
The COVID‐19 pandemic has heavily impacted academics’ professional and personal lives, forcing many research groups (labs) to shift from an academic system primarily based on in‐person work to an almost full‐time remote workforce during lockdowns. Labs are generally characterized by a strong lab culture that underpins all research and social activities of its members. Lab culture traditionally builds on the pillars of in‐person communication, knowledge sharing, and all social and professional activities that promote collaboration, team building, scientific productivity, and well‐being. Here, we use the experience of our research group facing the COVID‐19 pandemic to illustrate how proactively reinforcing lab culture and its positive outcomes have been essential to our lab when transitioning from an in‐person to a remote lab environment, and through its ongoing evolution toward a hybrid remote/in‐person model. We argue that the proactive promotion of lab culture in research groups can foster academic resilience during crises, helping research groups to maintain their capacity to conduct scientific activities while preserving a sustainable life/work balance and a healthy mental condition.
- 16 June 2022
- Published by Wiley in Ecology and Evolution
- Vol. 12 (6) , e8986
Open AccessPromoting lab culture to enhance academic resilience during crises
The COVID‐19 pandemic has heavily impacted academics’ professional and personal lives, forcing many research groups (labs) to shift from an academic system primarily based on in‐person work to an almost full‐time remote workforce during lockdowns. Labs are generally characterized by a strong lab culture that underpins all research and social activities of its members. Lab culture traditionally builds on the pillars of in‐person communication, knowledge sharing, and all social and professional activities that promote collaboration, team building, scientific productivity, and well‐being. Here, we use the experience of our research group facing the COVID‐19 pandemic to illustrate how proactively reinforcing lab culture and its positive outcomes have been essential to our lab when transitioning from an in‐person to a remote lab environment, and through its ongoing evolution toward a hybrid remote/in‐person model. We argue that the proactive promotion of lab culture in research groups can foster academic resilience during crises, helping research groups to maintain their capacity to conduct scientific activities while preserving a sustainable life/work balance and a healthy mental condition.
- Open Access
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Quantification of Polystyrene Microplastic by Pyrolysis-GC-MS is Affected by the Polymer Molecular Weight and Soil Matrix
The perception of the omnipresence of microplastic in the environment has been followed by the need of analytical improvements to detect and quantify this pollution. Pyrolysis-gas chromatography-mass spectrometry (pyr-GC-MS) has been emerging as a promising alternative. For a robust quantification of microplastic by pyr-GC-MS, it is essential to improve our understanding of the aspects that interfere in the pyrolysis of microplastics. In this work we investigate the effects of different matrices and the polymer molecular weight on the pyr-GC-MS analysis of polystyrene (PS) microplastics. Besides, we also evaluated the effectiveness of adding poly(4-fluorostyrene) (PSF) as an internal standard to minimize the matrix effects. The three main markers of PS pyrolysis, i.e., styrene, styrene dimer and styrene trimer, were monitored. In general, the ratio between dimer and trimer significantly varied between the matrices and tended to decrease with the increasing of the organic carbon content in the soil. A strong matrix effect affected the slope of the calibrations curves from 2 to 8-fold, but this effect was largely mitigated when the areas of the PS markers were normalized by the area of the corresponding markers of PSF. PS of low molecular weight (Mw 35,000) presented a reduced formation of the all three markers when compared to PS of high molecular weight (Mw 400,000), and styrene-dimer was proportionally less formed than the other two markers. Differences in the slopes of the calibration curves built with each polymer type were depended on the marker chosen and might lead to quantification errors in a 5-fold magnitude. In conclusion, in the absence of an internal standard, external calibration curves should be avoided, and the standard addition method arises as an alternative. Likewise, the development of reference materials for the study of microplastic pollution should encompass the complexity of the microstructure of the target analyte, including various molecular structures, such as molecular weights.
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessQuantification of Polystyrene Microplastic by Pyrolysis-GC-MS is Affected by the Polymer Molecular Weight and Soil Matrix
The perception of the omnipresence of microplastic in the environment has been followed by the need of analytical improvements to detect and quantify this pollution. Pyrolysis-gas chromatography-mass spectrometry (pyr-GC-MS) has been emerging as a promising alternative. For a robust quantification of microplastic by pyr-GC-MS, it is essential to improve our understanding of the aspects that interfere in the pyrolysis of microplastics. In this work we investigate the effects of different matrices and the polymer molecular weight on the pyr-GC-MS analysis of polystyrene (PS) microplastics. Besides, we also evaluated the effectiveness of adding poly(4-fluorostyrene) (PSF) as an internal standard to minimize the matrix effects. The three main markers of PS pyrolysis, i.e., styrene, styrene dimer and styrene trimer, were monitored. In general, the ratio between dimer and trimer significantly varied between the matrices and tended to decrease with the increasing of the organic carbon content in the soil. A strong matrix effect affected the slope of the calibrations curves from 2 to 8-fold, but this effect was largely mitigated when the areas of the PS markers were normalized by the area of the corresponding markers of PSF. PS of low molecular weight (Mw 35,000) presented a reduced formation of the all three markers when compared to PS of high molecular weight (Mw 400,000), and styrene-dimer was proportionally less formed than the other two markers. Differences in the slopes of the calibration curves built with each polymer type were depended on the marker chosen and might lead to quantification errors in a 5-fold magnitude. In conclusion, in the absence of an internal standard, external calibration curves should be avoided, and the standard addition method arises as an alternative. Likewise, the development of reference materials for the study of microplastic pollution should encompass the complexity of the microstructure of the target analyte, including various molecular structures, such as molecular weights.
- Open Access
- 27 May 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-9
Microplastic in angling baits as a cryptic source of contamination in European freshwaters
High environmental microplastic pollution, and its largely unquantified impacts on organisms, are driving studies to assess their potential entry pathways into freshwaters. Recreational angling, where many anglers release manufactured baits into freshwater ecosystems, is a widespread activity with important socio-economic implications in Europe. It also represents a potential microplastic pathway into freshwaters that has yet to be quantified. Correspondingly, we analysed three different categories of industrially-produced baits (‘groundbait’, ‘boilies’ and ‘pellets’) for their microplastic contamination (particles 700 µm to 5 mm). From 160 samples, 28 microplastics were identified in groundbait and boilies, with a mean concentration of 17.4 (± 48.1 SD) MP kg−1 and 6.78 (± 29.8 SD) mg kg−1, yet no microplastics within this size range were recorded in the pellets. Microplastic concentrations significantly differed between bait categories and companies, but microplastic characteristics did not vary. There was no correlation between microplastic contamination and the number of bait ingredients, but it was positively correlated with C:N ratio, indicating a higher contamination in baits with higher proportion of plant-based ingredients. We thus reveal that bait microplastics introduced accidentally during manufacturing and/or those originating from contaminated raw ingredients might be transferred into freshwaters. However, further studies are needed to quantify the relative importance of this cryptic source of contamination and how it influences microplastic levels in wild fish.
- 27 May 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-9
Open AccessMicroplastic in angling baits as a cryptic source of contamination in European freshwaters
High environmental microplastic pollution, and its largely unquantified impacts on organisms, are driving studies to assess their potential entry pathways into freshwaters. Recreational angling, where many anglers release manufactured baits into freshwater ecosystems, is a widespread activity with important socio-economic implications in Europe. It also represents a potential microplastic pathway into freshwaters that has yet to be quantified. Correspondingly, we analysed three different categories of industrially-produced baits (‘groundbait’, ‘boilies’ and ‘pellets’) for their microplastic contamination (particles 700 µm to 5 mm). From 160 samples, 28 microplastics were identified in groundbait and boilies, with a mean concentration of 17.4 (± 48.1 SD) MP kg−1 and 6.78 (± 29.8 SD) mg kg−1, yet no microplastics within this size range were recorded in the pellets. Microplastic concentrations significantly differed between bait categories and companies, but microplastic characteristics did not vary. There was no correlation between microplastic contamination and the number of bait ingredients, but it was positively correlated with C:N ratio, indicating a higher contamination in baits with higher proportion of plant-based ingredients. We thus reveal that bait microplastics introduced accidentally during manufacturing and/or those originating from contaminated raw ingredients might be transferred into freshwaters. However, further studies are needed to quantify the relative importance of this cryptic source of contamination and how it influences microplastic levels in wild fish.
- Top Cited Papers
- 1 May 2021
- Published by Elsevier in Science of The Total Environment
- Vol. 769, 144479
Urbanization and hydrological conditions drive the spatial and temporal variability of microplastic pollution in the Garonne River
- 1 May 2021
- Published by Elsevier in Science of The Total Environment
- Vol. 769, 144479
Top Cited PapersUrbanization and hydrological conditions drive the spatial and temporal variability of microplastic pollution in the Garonne River
- Open Access
- 17 February 2021
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 55 (5) , 3448
Correction to Stable Isotope Insights into Microplastic Contamination within Freshwater Food Webs
- 17 February 2021
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 55 (5) , 3448
Open AccessCorrection to Stable Isotope Insights into Microplastic Contamination within Freshwater Food Webs
- 7 January 2021
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 55 (2) , 1024-1035
Stable Isotope Insights into Microplastic Contamination within Freshwater Food Webs
Microplastic pollution and ingestion are ubiquitous phenomena in freshwater ecosystems. However, our understanding of the role of trophic niche in microplastic ingestion is still limited. Here, we quantified the level of microplastic (700 μm to 5 mm) contamination for macroinvertebrates and fish within the Garonne river. We then used stable isotope analyses (δ13C and δ15N) to quantify trophic niches. We first demonstrated that the abundance of ingested microplastics differed between macroinvertebrates and fish and was not significantly related to microplastic pollution. We then found that microplastic characteristics (shape, color, size, and polymer composition) differ between the abiotic (surface waters and sediments) and biotic (ingested by macroinvertebrates and fish) compartments. The abundance of ingested microplastics increased with the size of organisms in both fish and macroinvertebrates and tended to increase with trophic position in macroinvertebrates only. Finally, the origin of the resources consumed by fish significantly affected the abundance of microplastics ingested. Altogether, these results suggest the absence of microplastic bioaccumulation in freshwater food webs and the dominance of direct consumption, most likely accidentally. The use of stable isotope analyses is therefore crucial to improve our understanding of microplastic ingestion by wild organisms.
- 7 January 2021
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 55 (2) , 1024-1035
Stable Isotope Insights into Microplastic Contamination within Freshwater Food Webs
Microplastic pollution and ingestion are ubiquitous phenomena in freshwater ecosystems. However, our understanding of the role of trophic niche in microplastic ingestion is still limited. Here, we quantified the level of microplastic (700 μm to 5 mm) contamination for macroinvertebrates and fish within the Garonne river. We then used stable isotope analyses (δ13C and δ15N) to quantify trophic niches. We first demonstrated that the abundance of ingested microplastics differed between macroinvertebrates and fish and was not significantly related to microplastic pollution. We then found that microplastic characteristics (shape, color, size, and polymer composition) differ between the abiotic (surface waters and sediments) and biotic (ingested by macroinvertebrates and fish) compartments. The abundance of ingested microplastics increased with the size of organisms in both fish and macroinvertebrates and tended to increase with trophic position in macroinvertebrates only. Finally, the origin of the resources consumed by fish significantly affected the abundance of microplastics ingested. Altogether, these results suggest the absence of microplastic bioaccumulation in freshwater food webs and the dominance of direct consumption, most likely accidentally. The use of stable isotope analyses is therefore crucial to improve our understanding of microplastic ingestion by wild organisms.