Effect of Crystallization Conditions on the Microstructure, Crystal Structure, and Mechanical Properties of a Fe–Mn–C Alloy in Microvolumes
Authors:
- 1 January 2022
- journal article
- research article
- Published by Pleiades Publishing Ltd in Physics of Metals and Metallography
- Vol. 123 (1) , 85-91
Abstract
The results of the comparative study of the microstructure, crystal structure, and mechanical properties in microvolumes of the Fe–25 wt % Mn–2 wt % С alloy crystallized from melt in different structural states—homogeneous and heterogeneous—were presented. The study was performed by means of scanning electron microscopy Energy Dispersive X-Ray Spectroscopy (EDX), electron backscatter diffraction (EBSD), and nanoindentation. The destruction of microheterogeneity in the Fe–Mn–C melts was established to lead to an increase in the dendrite parameter, the size of crystallites, and the fraction of low-angle boundaries under cooling and further crystallization. The surface of austenite dendrites was revealed to contain manganese-rich liquation layers, which had a thickness 〈L〉 = 60 µm and a manganese content of 35–40% and led to deformation nonuniformity of an ingot. The adhesion strength of the liquation layer to the body of an austenite dendrite was estimated as Kint = 9.6–13.1 MPa m0.5 and could not be a reason for the destruction of an ingot.Keywords
This publication has 23 references indexed in Scilit:
- Superheat-dependent microstructure of molten Al–Si alloys of different compositions studied by small angle neutron scatteringJournal of Alloys and Compounds, 2013
- The Effect of Al-17wt.%Si Alloy Melt Overheating on Solidification Process and Microstructure EvolutionSolid State Phenomena, 2011
- Effect of Melt Superheating Treatment on Directional Solidification Interface Morphology of Multi-component AlloyJournal of Materials Science & Technology, 2011
- Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodologyJournal of Materials Research, 2004
- Effects of melt treatment on the cast structure of M963 superalloyScripta Materialia, 2003
- Supra-Ductile and High-Strength Manganese-TRIP/TWIP Steels for High Energy Absorption Purposes.ISIJ International, 2003
- Influence of grain boundary character distribution on sensitization and intergranular corrosion of alloy 600Scripta Metallurgica et Materialia, 1995
- Grain boundary design and control for high temperature materialsMaterials Science and Engineering: A, 1993
- Grain boundary design and control for intergranular stress-corrosion resistanceScripta Metallurgica et Materialia, 1991
- A quantitative assessment of the hardenability increase resulting from a superhardenability treatmentMetallurgical Transactions A, 1984