A novel medium entropy alloy based on iron-manganese-aluminum-nickel: influence of boron addition on phase formation, microstructure, and mechanical properties
Open Access
- 23 December 2019
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (1) , 016516
Abstract
A novel Medium Entropy Alloy (MEA) based on Fe-Mn-Al-Ni has been designed adopting High Entropy Alloys' (HEAs) phase formation rules, and the effects of minor boron addition on phase content and mechanical properties have been separately investigated. Boron-free Fe(52.71x)Mn31.11Al5.09Ni11.08Bx (x=0, 0.05, 0.2, 0.5, 0.7 wt%) MEA showed a single facecentered cubic (FCC) structure. XRD results indicated that with 0.05 and 0.2 wt% boron addition the system maintains its single-phase structure. Further boron addition led to the formation of metal boride intermetallics by the volume fractions of 4.6 and 6.1% of Fe2B intermetallic phase in as-cast and 2.7 and 5.4% in Deformed and Heat-treated (D&H) samples according to Rietveld analysis for 0.5 and 0.7 wt% boron doped alloys, respectively. Boron addition had a positive effect on grain size reduction of the system where just by 0.05 wt% boron addition the grain size has been almost halved compared to boron free as-cast sample. Moreover, it was observed that as the boron level increases, the hardness value increases. The thermomechanical process resulted in increasing the yield strength by ~50% (from 151 MPa to 222.5 MPa) and ultimate tensile strength by ~15% (from 476 MPa to 543 MPa)-both in 0.7wt % boron doped alloy-at comparable ductility (Ԑ>60%).Keywords
This publication has 31 references indexed in Scilit:
- A critical review of high entropy alloys and related conceptsActa Materialia, 2017
- High-entropy alloy: challenges and prospectsMaterials Today, 2016
- Structure and mechanical properties of the AlCrxNbTiV (x = 0, 0.5, 1, 1.5) high entropy alloysJournal of Alloys and Compounds, 2015
- Effect of Mo and Ni elements on microstructure evolution and mechanical properties of the CoFeNixVMoy high entropy alloysJournal of Alloys and Compounds, 2015
- Microstructure and properties of a refractory high-entropy alloy after cold workingJournal of Alloys and Compounds, 2015
- Prediction of high-entropy stabilized solid-solution in multi-component alloysMaterials Chemistry and Physics, 2012
- Preparation and characterization of AlCrTaTiZr multi-element nitride coatingsSurface and Coatings Technology, 2006
- Classification of Bulk Metallic Glasses by Atomic Size Difference, Heat of Mixing and Period of Constituent Elements and Its Application to Characterization of the Main Alloying ElementMATERIALS TRANSACTIONS, 2005
- Microstructural development in equiatomic multicomponent alloysMaterials Science and Engineering: A, 2004
- Wear resistance and high-temperature compression strength of Fcc CuCoNiCrAl0.5Fe alloy with boron additionMetallurgical and Materials Transactions A, 2004