Mohsen Zamani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mohsen Zamani has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Cem Sevik
University of Antwerp
2 shared publications Alpagut Kara
Eskisehir Tech Univ, Dept Mat Sci & Engn, TR-26555 Eskisehir, Turkiye
1 shared publication- Alpagut Kara
Sabancı University Nanotechnology Research and Application Center
1 shared publication - Hakan Gasan
Eskisehir Osmangazi University
1 shared publication Haluk Yapicioglu
Eskisehir Tech Univ, Dept Ind Engn, TR-26555 Eskisehir, Turkiye
1 shared publication- Haluk Yapicioglu
Eskisehir Technical University
1 shared publication
Latest Publications
- 8 November 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (12) , 125016
Correlation analysis of composition, microstructure, and final properties of porcelain tiles: an experimental study
This study deals with the intricate relationship between composition, microstructure and the final properties of porcelain tiles namely bulk density, water absorption, thermal expansion coefficient, strength, and Young’s modulus. In order to achieve this, a comprehensive set of 16 experimental trials were carried out, involving the preparation of eight distinct formulations characterized by varying Seger values and ratios which were subsequently subjected to sintering at two distinct firing temperatures. The analysis was conducted through a comprehensive correlation matrix, revealing significant relationships between composition, phase content and the final properties. The glassy phase emerges as a key contributor, positively influencing bulk density, reducing water absorption and linear shrinkage, and enhancing Young’s modulus. The coefficient of thermal expansion correlates positively with residual quartz and inversely with mullite content, highlighting their impact on this property. Strength is positively correlated with mullite content, while quartz, albite, and anorthite phases exhibit negative correlations due to their intricate influence on the overall microstructure. These findings provide essential insights into the complex interplay between composition, microstructure and properties, contributing to the advancement of materials engineering for tailored porcelain tiles.
- 8 November 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (12) , 125016
Correlation analysis of composition, microstructure, and final properties of porcelain tiles: an experimental study
This study deals with the intricate relationship between composition, microstructure and the final properties of porcelain tiles namely bulk density, water absorption, thermal expansion coefficient, strength, and Young’s modulus. In order to achieve this, a comprehensive set of 16 experimental trials were carried out, involving the preparation of eight distinct formulations characterized by varying Seger values and ratios which were subsequently subjected to sintering at two distinct firing temperatures. The analysis was conducted through a comprehensive correlation matrix, revealing significant relationships between composition, phase content and the final properties. The glassy phase emerges as a key contributor, positively influencing bulk density, reducing water absorption and linear shrinkage, and enhancing Young’s modulus. The coefficient of thermal expansion correlates positively with residual quartz and inversely with mullite content, highlighting their impact on this property. Strength is positively correlated with mullite content, while quartz, albite, and anorthite phases exhibit negative correlations due to their intricate influence on the overall microstructure. These findings provide essential insights into the complex interplay between composition, microstructure and properties, contributing to the advancement of materials engineering for tailored porcelain tiles.
- Open Access
- 21 November 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (12) , 125953
Statistical analysis of porcelain tiles’ technical properties: full factorial design investigation on oxide ratios and temperature
This study focuses on optimizing the composition and firing temperature of porcelain tiles using statistical analysis techniques. A full factorial design, including model adequacy checking, analysis of variance, Pareto charts, interaction plots, regression model, and response optimizer is employed. The key factors were the Seger ratios of SiO2/Al2O3, Na2O/K2O, MgO/CaO, and firing temperature. The response variables investigated were bulk density, water absorption, linear shrinkage, coefficient of thermal expansion (at 500 °C), and strength. The statistical analysis revealed highly significant results, which were further validated, confirming their reliability for practical use in the production of porcelain tiles. The study demonstrated the effectiveness of utilizing Seger formulas and properties of typical raw materials to accurately predict the final properties of ceramic tiles. By employing SiO2/Al2O3 = 5.2, Na2O/K2O = 1.50, MgO/CaO = 3.0, and firing temperature of 1180 °C, optimized properties, such as maximum strength, maximum bulk density, and minimum water absorption, was achieved with a composite desirability of 0.9821.
- 21 November 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (12) , 125953
Open AccessStatistical analysis of porcelain tiles’ technical properties: full factorial design investigation on oxide ratios and temperature
This study focuses on optimizing the composition and firing temperature of porcelain tiles using statistical analysis techniques. A full factorial design, including model adequacy checking, analysis of variance, Pareto charts, interaction plots, regression model, and response optimizer is employed. The key factors were the Seger ratios of SiO2/Al2O3, Na2O/K2O, MgO/CaO, and firing temperature. The response variables investigated were bulk density, water absorption, linear shrinkage, coefficient of thermal expansion (at 500 °C), and strength. The statistical analysis revealed highly significant results, which were further validated, confirming their reliability for practical use in the production of porcelain tiles. The study demonstrated the effectiveness of utilizing Seger formulas and properties of typical raw materials to accurately predict the final properties of ceramic tiles. By employing SiO2/Al2O3 = 5.2, Na2O/K2O = 1.50, MgO/CaO = 3.0, and firing temperature of 1180 °C, optimized properties, such as maximum strength, maximum bulk density, and minimum water absorption, was achieved with a composite desirability of 0.9821.
- Open Access
- 23 December 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (1) , 016516
A novel medium entropy alloy based on iron-manganese-aluminum-nickel: influence of boron addition on phase formation, microstructure, and mechanical properties
A novel Medium Entropy Alloy (MEA) based on Fe-Mn-Al-Ni has been designed adopting High Entropy Alloys' (HEAs) phase formation rules, and the effects of minor boron addition on phase content and mechanical properties have been separately investigated. Boron-free Fe(52.71x)Mn31.11Al5.09Ni11.08Bx (x=0, 0.05, 0.2, 0.5, 0.7 wt%) MEA showed a single facecentered cubic (FCC) structure. XRD results indicated that with 0.05 and 0.2 wt% boron addition the system maintains its single-phase structure. Further boron addition led to the formation of metal boride intermetallics by the volume fractions of 4.6 and 6.1% of Fe2B intermetallic phase in as-cast and 2.7 and 5.4% in Deformed and Heat-treated (D&H) samples according to Rietveld analysis for 0.5 and 0.7 wt% boron doped alloys, respectively. Boron addition had a positive effect on grain size reduction of the system where just by 0.05 wt% boron addition the grain size has been almost halved compared to boron free as-cast sample. Moreover, it was observed that as the boron level increases, the hardness value increases. The thermomechanical process resulted in increasing the yield strength by ~50% (from 151 MPa to 222.5 MPa) and ultimate tensile strength by ~15% (from 476 MPa to 543 MPa)-both in 0.7wt % boron doped alloy-at comparable ductility (Ԑ>60%).
- 23 December 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (1) , 016516
Open AccessA novel medium entropy alloy based on iron-manganese-aluminum-nickel: influence of boron addition on phase formation, microstructure, and mechanical properties
A novel Medium Entropy Alloy (MEA) based on Fe-Mn-Al-Ni has been designed adopting High Entropy Alloys' (HEAs) phase formation rules, and the effects of minor boron addition on phase content and mechanical properties have been separately investigated. Boron-free Fe(52.71x)Mn31.11Al5.09Ni11.08Bx (x=0, 0.05, 0.2, 0.5, 0.7 wt%) MEA showed a single facecentered cubic (FCC) structure. XRD results indicated that with 0.05 and 0.2 wt% boron addition the system maintains its single-phase structure. Further boron addition led to the formation of metal boride intermetallics by the volume fractions of 4.6 and 6.1% of Fe2B intermetallic phase in as-cast and 2.7 and 5.4% in Deformed and Heat-treated (D&H) samples according to Rietveld analysis for 0.5 and 0.7 wt% boron doped alloys, respectively. Boron addition had a positive effect on grain size reduction of the system where just by 0.05 wt% boron addition the grain size has been almost halved compared to boron free as-cast sample. Moreover, it was observed that as the boron level increases, the hardness value increases. The thermomechanical process resulted in increasing the yield strength by ~50% (from 151 MPa to 222.5 MPa) and ultimate tensile strength by ~15% (from 476 MPa to 543 MPa)-both in 0.7wt % boron doped alloy-at comparable ductility (Ԑ>60%).