This research work presents the effect of the untreated alumina nanoparticles in various amounts on cure behavior, thermal stability, hardness and tensile parameters and dynamic mechanical properties of epoxy/alumina nanocomposites. SEM micrographs were taken to monitor the extent of dispersion of the nano particles in the polymer matrix. Addition of alumina nanoparticles to the epoxy, had an accelerating effect on the curing process and a converse effect on the polymer network formation, but did not change the autocatalytic cure reaction mechanism of the epoxy/amine hardener system. Presence of the nanoparticles also improved thermal stability of the nanocomposites. Hardness of the composite containing 0.5 wt% nano alumina particles increased with respect to the resin system without any alumina content, further increase of the amount of the nano particles decreased the hardness of the nanocomposites respectively with small variations. This result matched well with the results obtained from the cure studies. Addition of nano alumina particles had an increasing effect on tensile strength and varying its amount to higher values kept on further increasing the corresponding property. The presence of rigid alumina nanoparticles increased the elastic modulus of the nanocomposites. Presence of alumina nano particles also increased the glass transition temperature of all the nanocomposites due to the increase of the interfacial adhesion and uniform dispersion of nano particles in the epoxy matrix, also confirmed from the SEM micrographs.