Magnetic and Mechanical Design of a 15-T Large Aperture Dipole Magnet for Cable Testing
- 4 February 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 29 (5) , 1-5
Abstract
A large aperture Nb 3 Sn dipole is proposed to replace the magnet assembly of EDIPO, which was irreversibly damaged in 2016. The goal is to generate a background field of 15 T at 4.2 K in a clear aperture of approximately 100×150 mm 2 and over a uniform length of 1000 mm in order to test superconducting cables for both fusion and high-energy physics applications. The magnet features a block-type coil design wound with wide Rutherford cable (two alternative coil cross sections are considered) and supported by a mechanical structure based on keys-and-bladders technology. In the end regions, the coils tilt up (flare) through a hard-way bend of the cables to provide room for the test well, following a layout already adopted in the LBNL HD2 and CERN-CEA FRESCA2 magnets. The two considered coil design alternatives aim at minimizing the mechanical stress in the coil windings. One coil pack design makes the use of two double pancake coils per pole, whereas the other alternative features three double pancakes per pole. Both design options are presented focusing on the results of numerical computations carried out with finite-element models to investigate peak stresses in the coils during room-temperature pre-loading, cool down, and powering.Keywords
This publication has 10 references indexed in Scilit:
- Critical Current Measurements Under Transverse Pressure of a Nb3Sn Rutherford Cable Based on 1 mm RRP WiresIEEE Transactions on Applied Superconductivity, 2018
- Conceptual Design of a Large Aperture Dipole for Testing of Cables and Insert Coils at High FieldIEEE Transactions on Applied Superconductivity, 2017
- EuroCirCol 16 T Block-Coils Dipole Option for the Future Circular ColliderIEEE Transactions on Applied Superconductivity, 2016
- The 16 T Dipole Development Program for FCCIEEE Transactions on Applied Superconductivity, 2016
- Commissioning of the Main Coil of the EDIPO Test FacilityIEEE Transactions on Applied Superconductivity, 2013
- Development of the EuCARD $\hbox{Nb}_{3}\hbox{Sn}$ Dipole Magnet FRESCA2IEEE Transactions on Applied Superconductivity, 2013
- Design of LD1, a Large-Aperture High-Field ${\rm Nb}_{3}{\rm Sn}$ Dipole MagnetIEEE Transactions on Applied Superconductivity, 2011
- Recent Test Results of the High Field ${\rm Nb}_{3}{\rm Sn}$ Dipole Magnet HD2IEEE Transactions on Applied Superconductivity, 2010
- Design and optimization of the 12.5T EFDA dipole magnetCryogenics, 2006
- The use of pressurized bladders for stress control of superconducting magnetsIEEE Transactions on Applied Superconductivity, 2001