Jet electrolytic plasma polishing process for high temperature alloy additive manufacturing of large size surfaces
Open Access
- 1 March 2025
- journal article
- Published by AIP Publishing in AIP Advances
- Vol. 15 (3)
Abstract
Aiming at the problem of surface finishing of large-size additively manufactured high-temperature alloy parts, a jet electrolytic plasma polishing process for the surface treatment of specific large-size high-temperature alloy samples has been developed. Taking the typical high-temperature alloy curved workpiece as the research object, through the orthogonal test research results, this research has studied the influence law of different process parameters on the surface roughness of the alloy and realized the verification of the process effect of the surface roughness of the high-temperature alloy surface polished by jet electrolytic plasma polishing. It was found that the degree of influence of the four process parameters on the surface roughness was in the following order: flow rate > cathode and anode spacing ≈ voltage > temperature. The process conditions adapted to the surface polishing of high-temperature alloys are as follows: a cathode and anode spacing of 25 mm, a voltage of 340 V, an electrolyte temperature of 70 °C, and an electrolyte flow rate of 1.2 l/h. The surface roughness of the workpiece obtained after polishing under these process conditions is the lowest, and the surface roughness (Ra) of high-temperature alloys decreases from 13.251 to 0.853 μm, with a decrease rate of 93.56%. The experimental results show that the impurity elements on the surface of the high-temperature alloy have been removed by electrolytic plasma polishing, the residue of electrolyte component elements is not detected, and the specimens treated by electrolyte plasma polishing present a better corrosion resistance.Keywords
This publication has 15 references indexed in Scilit:
- Local surface smoothness on TC4 alloy during microbubbles flow electrolytic plasma polishing: prototype rig, phenomena, and mechanismThe International Journal of Advanced Manufacturing Technology, 2024
- Electrolyte component preference and surface integrity impact analysis for electrolytic plasma polishing of cobalt-chromium-molybdenum alloysThe International Journal of Advanced Manufacturing Technology, 2024
- Flash plasma electrolytic oxidation and electrochemical behaviour in physiological media of additive manufacturing Ti6Al4V alloyTransactions of Nonferrous Metals Society of China, 2024
- Influence of electrolytic plasma spatial distribution on nanoporous structure etching on 4H-SiC surfaceCeramics International, 2024
- Material removal model for describing the plasma discharge effect in magnetic-electrolytic plasma polishingThe International Journal of Advanced Manufacturing Technology, 2024
- Parameters optimization of electrolytic plasma polishing of austenitic stainless steel and surface performance analysisProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2023
- Characteristics and function of vapour gaseous envelope fluctuation in plasma electrolytic polishingThe International Journal of Advanced Manufacturing Technology, 2022
- Electrochemical mechanical polishing of internal holes created by selective laser meltingJournal of Manufacturing Processes, 2021
- Corrosion behavior of additive manufactured CoCr parts polished with plasma electrolytic polishingSurface and Coatings Technology, 2021
- Mechanism and technological opportunity of plasma electrolytic polishing of metals and alloys surfacesApplied Surface Science Advances, 2020