Performance Evaluation of Post-Consumer and Post-Industrial Recycled Plastics as Binder Modifier in Asphalt Mixes
Authors:
Open Access
- 15 November 2024
- journal article
- research article
- Published by Springer Nature in International Journal of Pavement Research and Technology
- Vol. 19 (3) , 663-676
Abstract
This study aims to analyse the behaviour of asphalt concrete produced from recycled plastic-modified bitumen. This particular production process is known as the wet method, which involves the blending of low melting point recycled plastics, mostly polyolefins, in hot bitumen before mixing with preheated aggregate. Based on a comprehensive research study that investigated several recycled plastics for the wet method, two common low melting point plastics from two different collection streams were evaluated: a low-density polyethylene from post-industrial recycling operations and a source of commingled plastic (polyethylene and polypropylene) from the collection of post-consumer plastics. Plastic-modified bitumen was produced with different recycled plastic contents ranging from 0.5 to 6% of the bitumen weight. First, the storage stability of the plastic-modified bitumen was evaluated. Then, asphalt mixes were produced using the plastic-modified bitumen. The testing scheme included measurements of the compactability and densification behaviour of the mixes, moisture resistance, viscoelastic behaviour via the flexural stiffness test, IDEAL-CT test to evaluate cracking tolerance, fatigue resistance through the four-point bending beam test, and rutting resistance via Hamburg wheel tracking. The study found that adding a high plastic content significantly reduced the storage stability of the plastic-modified bitumen. Adding plastic was found to have a minor impact on the compactability, while it reduced the moisture resistance with increasing plastic addition and modified the viscoelastic behaviour of the asphalt mixtures. Finally, the study found that plastic provided benefits to the cracking and rutting resistance of asphalt mixtures to different extents depending on the plastic type and plastic content.Keywords
Funding Information
- Royal Melbourne Institute of Technology
This publication has 25 references indexed in Scilit:
- Investigating the Optimum Modifier Dosage and Production Temperature for Plastic-Modified Warm Bituminous MixesInternational Journal of Pavement Research and Technology, 2023
- Recycling of Waste Sulfur and Waste Polyethylene in Paving MixturesInternational Journal of Pavement Research and Technology, 2023
- The Utilisation of Polyethylene Waste Pyrolytic Wax as an Additive to Enhance the Performance of Virgin and Polypropylene-Modified BitumenInternational Journal of Pavement Research and Technology, 2023
- Effect of Various Compatibilizers on the Storage Stability, Thermochemical and Rheological Properties of Recycled Plastic-Modified BitumenInternational Journal of Pavement Research and Technology, 2023
- Valorization of Plastic Waste (PP-LDPE) from Moroccan Industry in Modification of Hybrid Bitumen: Application of the Mixture Design MethodologyInternational Journal of Pavement Research and Technology, 2022
- Evaluation of Mechanical Characteristics and Plastic Coating Efficiency in Plastic-Modified Asphalt MixesInternational Journal of Pavement Research and Technology, 2022
- Enhancing the Storage Stability of SBS-Plastic Waste Modified Bitumen Using Reactive Elastomeric TerpolymerInternational Journal of Pavement Research and Technology, 2022
- The effect of waste low-density polyethylene on the mechanical properties of thin asphalt overlayConstruction and Building Materials, 2022
- Engineering behavior of aged polypropylene-modified asphalt pavementsConstruction and Building Materials, 2018
- Laboratory evaluation of flexible pavement materials containing waste polyethylene (WPE) filmConstruction and Building Materials, 2010