Increasing the Resistance of Piles Subject to Cyclic Lateral Loading
Authors:
- 1 October 2011
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 137 (10) , 977-982
Abstract
Small-scale tests were carried out on a monopile and fin piles to determine the effect the length of fins had upon the lateral displacement of cyclically loaded piles. A variety of loading conditions were applied to model piles in a dense sand by using a mechanical loading system. Ten thousand cycles were used in each test to represent 20 years of environmental loading on offshore structures. Variables included the magnitude, frequency, and direction of the load; the type of pile tip; and the length of the fins. The reduction in pile head displacement was used as a measure of the efficiency of the fins. The tests show that the fins reduced the lateral displacement by at least 50% after 10,000 cycles.Keywords
This publication has 12 references indexed in Scilit:
- Laterally Loaded Piles With Bulge2007
- Lateral Resistance of Full-Scale Pile Cap with Gravel BackfillJournal of Geotechnical and Geoenvironmental Engineering, 2002
- Cyclic Response of Axially Loaded Tapered PilesGeotechnical Testing Journal, 2000
- Response of tapered piles subjected to lateral loadingCanadian Geotechnical Journal, 1999
- Experimental study of axial behaviour of tapered pilesCanadian Geotechnical Journal, 1998
- Influence of Rigidity on Laterally Loaded Pile Groups in Marine ClayJournal of Geotechnical and Geoenvironmental Engineering, 1998
- Nonlinear Lateral Pile Deflection Prediction in SandsJournal of Geotechnical Engineering, 1996
- LATERAL LOAD CAPACITY OF SINGLE PILES IN SAND.Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, 1994
- Analysis of Laterally Loaded Piles in Sand1974
- Thrust Loading on PilesJournal of the Soil Mechanics and Foundations Division, 1956