A Highly Integrated Passive Wireless Sensing System With Synchronized Data Streaming of Multiple Tags
- 6 June 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 9 (17) , 15525-15537
Abstract
This paper introduces a highly integrated passive wireless sensing system based on extended EPC Gen2 protocol, using sensor tags and a reader to support concurrent data streams from multiple sensors. Multiple Subcarrier Multiple Access (MSMA) is used by assigning different subcarrier frequencies to the sensor tags for backscattering so that each tag has an independent channel for communication to achieve the simultaneous streaming of multi-sensor data. In order to improve the subcarrier frequency accuracy and further increase the number of communication channels, this paper proposes a novel method of subcarrier frequency calibration based on the Gen2 protocol. This method enables a high accuracy clock to be generated on-chip. At the same time, this paper also proposes a method based on Gen2 protocol to start a group of tags and receive real-time data in parallel. The tag chip is fabricated in a 0.18 μm CMOS process with a die size of 850 μm × 850 μm, and the reader prototype is built using software-defined radio equipment. The test results show that the sensing system proposed in this paper can collect and recognize concurrent data streams from multiple sensor tags synchronously. The measured sensitivity of the sensor tag is -14.9dBm with a 3-axis accelerating sensor, and the calibration accuracy of subcarrier frequency is better than ±0.385KHz in the range of 40KHz-640KHz. With this accuracy, the tags can be allocated up to 78 subcarrier communication channels theoretically.Keywords
This publication has 31 references indexed in Scilit:
- Aeroelastic monitoring system: A part of long-span bridge structural health monitoring system2017
- Structural Health Monitoring Using Wireless Sensor Networks: A Comprehensive SurveyIEEE Communications Surveys & Tutorials, 2017
- A survey: Structural health monitoring of bridge using WSN2016
- An RFID-Enabled Wireless Strain Gauge Sensor for Static and Dynamic Structural MonitoringIEEE Sensors Journal, 2016
- Impact of time synchronization error on the mode-shape calculation in wireless sensor networks for structural health monitoring2016
- A 2.2 $\mu\text{W}$ , $-$ 12 dBm RF-Powered Wireless Current Sensing Readout Interface IC With Injection-Locking Clock GenerationIEEE Transactions on Circuits and Systems I: Regular Papers, 2016
- RFID-inspired wireless microsensors for structural health monitoring2016
- Measurement System With Accelerometer Integrated RFID Tag for Infrastructure Health MonitoringIEEE Transactions on Instrumentation and Measurement, 2015
- Decoding of multiple same-coded in-line placed chipless RFID tags2014
- Passive Wireless Sensor Applications for NASA’s Extreme Aeronautical EnvironmentsIEEE Sensors Journal, 2014