Fabrication of Hybrid Antiresonant Negative Curvature Optical Fiber With GeO 2 ‐Doped Rings Enabling Dual‐Guidance Mechanism
- 20 September 2026
- journal article
- research article
- Published by Wiley in Physica Status Solidi (a)
- Vol. 223 (18) , e70532
Abstract
In this paper, the fabrication and characterization of hybrid antiresonant negative curvature optical fiber (Hybrid‐ARNCF) are presented to understand unique dual‐guidance mechanism based on total internal reflection (TIR) and antiresonant reflecting optical waveguide (ARROW) principle. The fabrication of the Hybrid‐ARNCF is extensively presented, beginning with the deposition of GeO 2 ‐layer via modified chemical vapor deposition (MCVD) method to form resonant ring in the final fiber structure. Various process parameters, including the doped layer thickness, capillary and rod drawing steps, and the structured assembly into jacketing tube, are optimized to develop final fiber preform. This preform is then drawn into an optical fiber featuring a 32 μm core surrounded by eight microchannels, each lined with a resonant ring of ⁓1.05 μm thickness. The developed Hybrid‐ARNCF exhibits sharp, highly sensitive resonant peaks, which show pronounced spectral shifts in response to the refractive index variations within the cladding microchannels, which aligns well with our simulations and theoretical expression of the resonant wavelengths. These RI‐dependent resonant shifts were used to experimentally validate the dual‐guidance mechanism and the influence of asymmetry factor on the resonant peaks, which are important for optimizing the Hybrid‐ARNCF in terms of high‐power fiber laser applications.Keywords
This publication has 23 references indexed in Scilit:
- Characterization of biodegradable core–clad borosilicate glass fibers with round and rectangular cross‐sectionJournal of the American Ceramic Society, 2023
- Design of large mode area all-solid anti-resonant fiber for high-power lasersHigh Power Laser Science and Engineering, 2021
- Recent Progress in Low-Loss Hollow-Core Anti-Resonant Fibers and Their ApplicationsIEEE Journal of Selected Topics in Quantum Electronics, 2019
- Spectral optical constants of ethanol and isopropanol from ultraviolet to far infraredOptical Materials, 2016
- Large-Mode-Area All-Solid Photonic Bandgap Fibers for the Mitigation of Optical NonlinearitiesIEEE Journal of Selected Topics in Quantum Electronics, 2015
- High Power Fiber Lasers: A ReviewIEEE Journal of Selected Topics in Quantum Electronics, 2014
- Yb-doped large-pitch fibres: effective single-mode operation based on higher-order mode delocalisationLight: Science & Applications, 2012
- High Repetition Rate Gigawatt Peak Power Fiber Laser Systems: Challenges, Design, and ExperimentIEEE Journal of Selected Topics in Quantum Electronics, 2009
- Correlation between maximum crystal growth rate and glass transition temperature of silicate glassesJournal of Non-Crystalline Solids, 2005
- Dispersion of refractive properties of solvents: Chloroform, toluene, benzene, and carbon disulfide in ultraviolet, visible, and near-infraredJournal of Applied Physics, 2003