Anirban Dhar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Anirban Dhar has a total of 83 co-authors. Here are the top co-authors by number of shared publications:
Ranjan Sen
Fiber Optics & Photonics Division CSIR‐Central Glass and Ceramic Research Institute Kolkata India
9 shared publications- Mukul Chandra Paul
Central Glass and Ceramic Research Institute
8 shared publications - Shyamal Das
Fiber Optics and Photonics Division, Central Glass & Ceramic Research Institute, Kolkata, West Bengal India
6 shared publications - Alexander V. Kir’yAnov
Centro de Investigaciones en Óptica
4 shared publications Deepak Jain
Optics and Photonics Centre Indian Institute of Technology Delhi New Delhi India
4 shared publicationsNilotpal Choudhury
4 shared publications
Latest Publications
- 20 September 2026
- Published by Wiley in Physica Status Solidi (a)
- Vol. 223 (18) , e70532
Fabrication of Hybrid Antiresonant Negative Curvature Optical Fiber With GeO 2 ‐Doped Rings Enabling Dual‐Guidance Mechanism
In this paper, the fabrication and characterization of hybrid antiresonant negative curvature optical fiber (Hybrid‐ARNCF) are presented to understand unique dual‐guidance mechanism based on total internal reflection (TIR) and antiresonant reflecting optical waveguide (ARROW) principle. The fabrication of the Hybrid‐ARNCF is extensively presented, beginning with the deposition of GeO 2 ‐layer via modified chemical vapor deposition (MCVD) method to form resonant ring in the final fiber structure. Various process parameters, including the doped layer thickness, capillary and rod drawing steps, and the structured assembly into jacketing tube, are optimized to develop final fiber preform. This preform is then drawn into an optical fiber featuring a 32 μm core surrounded by eight microchannels, each lined with a resonant ring of ⁓1.05 μm thickness. The developed Hybrid‐ARNCF exhibits sharp, highly sensitive resonant peaks, which show pronounced spectral shifts in response to the refractive index variations within the cladding microchannels, which aligns well with our simulations and theoretical expression of the resonant wavelengths. These RI‐dependent resonant shifts were used to experimentally validate the dual‐guidance mechanism and the influence of asymmetry factor on the resonant peaks, which are important for optimizing the Hybrid‐ARNCF in terms of high‐power fiber laser applications.
- 20 September 2026
- Published by Wiley in Physica Status Solidi (a)
- Vol. 223 (18) , e70532
Fabrication of Hybrid Antiresonant Negative Curvature Optical Fiber With GeO 2 ‐Doped Rings Enabling Dual‐Guidance Mechanism
In this paper, the fabrication and characterization of hybrid antiresonant negative curvature optical fiber (Hybrid‐ARNCF) are presented to understand unique dual‐guidance mechanism based on total internal reflection (TIR) and antiresonant reflecting optical waveguide (ARROW) principle. The fabrication of the Hybrid‐ARNCF is extensively presented, beginning with the deposition of GeO 2 ‐layer via modified chemical vapor deposition (MCVD) method to form resonant ring in the final fiber structure. Various process parameters, including the doped layer thickness, capillary and rod drawing steps, and the structured assembly into jacketing tube, are optimized to develop final fiber preform. This preform is then drawn into an optical fiber featuring a 32 μm core surrounded by eight microchannels, each lined with a resonant ring of ⁓1.05 μm thickness. The developed Hybrid‐ARNCF exhibits sharp, highly sensitive resonant peaks, which show pronounced spectral shifts in response to the refractive index variations within the cladding microchannels, which aligns well with our simulations and theoretical expression of the resonant wavelengths. These RI‐dependent resonant shifts were used to experimentally validate the dual‐guidance mechanism and the influence of asymmetry factor on the resonant peaks, which are important for optimizing the Hybrid‐ARNCF in terms of high‐power fiber laser applications.
- 27 June 2026
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 109 (7)
Tailoring Al‐F‐P‐Si Glass Network for Yb 3+ ‐Doped Fibers With Enhanced Photodarkening Stability
Yb 3+ ‐doped fiber lasers are widely used for high‐power applications but suffer from photodarkening (PD), limiting long‐term performance. We report a novel fabrication approach for alumino‐fluorophosphosilicate (AFPS)‐based Yb 3+ ‐doped fibers using the modified chemical vapor deposition–vapor phase chelate delivery (MCVD–VPCD) process. Strategic fluorine co‐doping during core deposition suppresses P 2 O 5 evaporation, minimizes central dip formation in the refractive index profile, reduces the numerical aperture, and mitigates Yb–Yb pair formation. Optimized preforms with high Yb 3+ concentration (∼4000 ppm) with nearly 1:1 Al:P ratios resulted in the formation of a stable glass network containing AlPO 4 units, in a repeatable manner without structural distortions. A comparative PD‐induced loss analysis revealed that Yb‐doped AFPS fibers exhibit ∼5.4‐fold and ∼3.5‐fold improvement toward long‐term stability than conventional Al–Si–Yb fibers and P 2 O 5 ‐rich Al–P–Si–Yb fibers, respectively. The overall results highlight AFPS as a robust host glass for high‐power laser applications with improved PD resistance.
- 27 June 2026
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 109 (7)
Tailoring Al‐F‐P‐Si Glass Network for Yb 3+ ‐Doped Fibers With Enhanced Photodarkening Stability
Yb 3+ ‐doped fiber lasers are widely used for high‐power applications but suffer from photodarkening (PD), limiting long‐term performance. We report a novel fabrication approach for alumino‐fluorophosphosilicate (AFPS)‐based Yb 3+ ‐doped fibers using the modified chemical vapor deposition–vapor phase chelate delivery (MCVD–VPCD) process. Strategic fluorine co‐doping during core deposition suppresses P 2 O 5 evaporation, minimizes central dip formation in the refractive index profile, reduces the numerical aperture, and mitigates Yb–Yb pair formation. Optimized preforms with high Yb 3+ concentration (∼4000 ppm) with nearly 1:1 Al:P ratios resulted in the formation of a stable glass network containing AlPO 4 units, in a repeatable manner without structural distortions. A comparative PD‐induced loss analysis revealed that Yb‐doped AFPS fibers exhibit ∼5.4‐fold and ∼3.5‐fold improvement toward long‐term stability than conventional Al–Si–Yb fibers and P 2 O 5 ‐rich Al–P–Si–Yb fibers, respectively. The overall results highlight AFPS as a robust host glass for high‐power laser applications with improved PD resistance.
- 28 December 2024
- Published by Elsevier in Optics Communications
- Vol. 577
Advancements in fabrication technology for rare-earth doped optical fibers: A retrospective analysis
- 28 December 2024
- Published by Elsevier in Optics Communications
- Vol. 577
Advancements in fabrication technology for rare-earth doped optical fibers: A retrospective analysis
- 31 October 2024
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 19 (24) , e202400921
Wormhole Mesoporous Silica Framework with Enhanced Thiol Loading for Improved Hg2+ Sequestration
Thiol‐functionalized mesoporous silica and materials potentially dedicated to diverse applications of composite materials, metal colloids, and metal catalysts, etc. Here, we developed a new synthesis route for 3‐methacryloxypropyl trimethoxy silane (MPTMS) functionalized mesoporous silica (KIT‐6), achieving a 71.5 % enhancement in thiol functionalization on KIT‐6 surfaces. Characterization using XRD, TEM, BET, FTIR, Raman, 29Si NMR, XPS, and ICP‐OES revealed structural and morphological features. XRD, TEM, and BET confirmed the three‐dimensional structural stabilization of mesoporous silica with ~4 nm pore diameter and a surface area of 1451 m2 g−1. FTIR, Raman, and 29Si NMR studies established the mechanism of thiol functionalization, the formation of a new wormhole chain structural framework (WCSF), and stabilization through hydrogen bonding within the mesopores. The 29Si NMR spectra showed characteristic peaks (T3, T2, Q4, Q3) indicating self‐condensed functionalized thiols with siloxane networks. XPS analysis validated enhanced thiol functionalization, indicating a structurally homogeneous WCSF suitable for mercury adsorption. ICP‐OES measured a mercury adsorption capacity of 3199.6 mg g−1 for KIT‐6, with an Hg2+/S ratio of 1.8, corroborated by molecular structure and mechanism analysis. This innovative thiol functionalization approach enhances the efficacy of applications such as extracting Hg2+ from contaminated sources.
- 31 October 2024
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 19 (24) , e202400921
Wormhole Mesoporous Silica Framework with Enhanced Thiol Loading for Improved Hg2+ Sequestration
Thiol‐functionalized mesoporous silica and materials potentially dedicated to diverse applications of composite materials, metal colloids, and metal catalysts, etc. Here, we developed a new synthesis route for 3‐methacryloxypropyl trimethoxy silane (MPTMS) functionalized mesoporous silica (KIT‐6), achieving a 71.5 % enhancement in thiol functionalization on KIT‐6 surfaces. Characterization using XRD, TEM, BET, FTIR, Raman, 29Si NMR, XPS, and ICP‐OES revealed structural and morphological features. XRD, TEM, and BET confirmed the three‐dimensional structural stabilization of mesoporous silica with ~4 nm pore diameter and a surface area of 1451 m2 g−1. FTIR, Raman, and 29Si NMR studies established the mechanism of thiol functionalization, the formation of a new wormhole chain structural framework (WCSF), and stabilization through hydrogen bonding within the mesopores. The 29Si NMR spectra showed characteristic peaks (T3, T2, Q4, Q3) indicating self‐condensed functionalized thiols with siloxane networks. XPS analysis validated enhanced thiol functionalization, indicating a structurally homogeneous WCSF suitable for mercury adsorption. ICP‐OES measured a mercury adsorption capacity of 3199.6 mg g−1 for KIT‐6, with an Hg2+/S ratio of 1.8, corroborated by molecular structure and mechanism analysis. This innovative thiol functionalization approach enhances the efficacy of applications such as extracting Hg2+ from contaminated sources.
- 29 July 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (21) , 41044-41056
An advanced fabrication method for Yb3+-Doped optical fibers featuring AlPO4 core glass
- 29 July 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (21) , 41044-41056
An advanced fabrication method for Yb3+-Doped optical fibers featuring AlPO4 core glass
- 28 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (20) , 7342-7349
Optimizing Bendable “ARC” Optical Fibers for Comparable Performance to Rod-Type Fibers in Ultra-High-Power Lasers
We explored bend-compensated, parabolic-core, low-index contrast optical fiber with tilted cladding for applications in high-power lasers. First, we understood the impact of different parameters such as the alpha parameter of parabolic core, core diameter, tilted cladding diameter, and outer cladding diameter on the discriminative loss and power delocalization between the fundamental mode (FM) and higher order modes (HOMs) at different bend diameters around 1 μm wavelength. Later, we managed to find different sets of fiber design parameters so that: (a) an effective area of the FM between 900 to 1200 μm 2 , while ensuring a loss lower than 0.01 dB/m and a loss higher than 100 dB/m for bend diameter in the range of 27 to 35 cm, (b) an effective area of the FM around 2500 μm 2 , while ensuring a loss lower than 0.1 dB/m and a loss higher than 20 dB/m for bend diameter less than 50 cm, and (c) an effective area of the FM around 5000 μm 2 , while ensuring a loss lower than 0.1 dB/m and a loss higher than 10 dB/m for bend diameter 100 cm can be achieved. We have pushed the boundaries of coiled large mode area fiber performance by demonstrating record effective area and suppressed HOMs, approaching the capabilities of the current state-of-the-art rod-type fibers.
- 28 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (20) , 7342-7349
Optimizing Bendable “ARC” Optical Fibers for Comparable Performance to Rod-Type Fibers in Ultra-High-Power Lasers
We explored bend-compensated, parabolic-core, low-index contrast optical fiber with tilted cladding for applications in high-power lasers. First, we understood the impact of different parameters such as the alpha parameter of parabolic core, core diameter, tilted cladding diameter, and outer cladding diameter on the discriminative loss and power delocalization between the fundamental mode (FM) and higher order modes (HOMs) at different bend diameters around 1 μm wavelength. Later, we managed to find different sets of fiber design parameters so that: (a) an effective area of the FM between 900 to 1200 μm 2 , while ensuring a loss lower than 0.01 dB/m and a loss higher than 100 dB/m for bend diameter in the range of 27 to 35 cm, (b) an effective area of the FM around 2500 μm 2 , while ensuring a loss lower than 0.1 dB/m and a loss higher than 20 dB/m for bend diameter less than 50 cm, and (c) an effective area of the FM around 5000 μm 2 , while ensuring a loss lower than 0.1 dB/m and a loss higher than 10 dB/m for bend diameter 100 cm can be achieved. We have pushed the boundaries of coiled large mode area fiber performance by demonstrating record effective area and suppressed HOMs, approaching the capabilities of the current state-of-the-art rod-type fibers.
- 2 January 2023
- Published by Elsevier in Ceramics International
- Vol. 49 (9) , 14145-14154
Investigation on porous aluminosilicate soot layer for fabrication of specialty optical fiber using VPCD technique
- 2 January 2023
- Published by Elsevier in Ceramics International
- Vol. 49 (9) , 14145-14154
Investigation on porous aluminosilicate soot layer for fabrication of specialty optical fiber using VPCD technique
- 9 December 2022
- Published by Elsevier in Ceramics International
- Vol. 49 (8) , 12116-12125
Synthesis and characterization of Yb3+ activated Lu2O3 nanoparticles doped optical fiber preform for high power laser application
- 9 December 2022
- Published by Elsevier in Ceramics International
- Vol. 49 (8) , 12116-12125
Synthesis and characterization of Yb3+ activated Lu2O3 nanoparticles doped optical fiber preform for high power laser application
- Open Access
- 19 February 2022
- Published by Elsevier in Advanced Powder Technology
- Vol. 33 (3) , 103501
Crystallization kinetics and structural properties of nanocrystalline europium-yttrium-titanate (Eu0.5Y0.5)2Ti2O7
- 19 February 2022
- Published by Elsevier in Advanced Powder Technology
- Vol. 33 (3) , 103501
Open AccessCrystallization kinetics and structural properties of nanocrystalline europium-yttrium-titanate (Eu0.5Y0.5)2Ti2O7
- Open Access
- 1 January 2022
- Published by Optica Publishing Group
- Vol. 358, FTh2A.4
Multimode Mamyshev Oscillator
Spatiotemporal mode-locking (STML) is demonstrated in a Mamyshev Oscillator. We observe a variety of STML states with different degrees of spatiotemporal coupling. The design allows some control over the multimode output beam profile.
- 1 January 2022
- Published by Optica Publishing Group
- Vol. 358, FTh2A.4
Open AccessMultimode Mamyshev Oscillator
Spatiotemporal mode-locking (STML) is demonstrated in a Mamyshev Oscillator. We observe a variety of STML states with different degrees of spatiotemporal coupling. The design allows some control over the multimode output beam profile.