Oxygen Barrier Properties of Waterborne Polyurethane/Silica Hybrids
- 16 March 2015
- journal article
- research article
- Published by Taylor & Francis in Journal of Macromolecular Science, Part B
- Vol. 54 (6) , 711-721
Abstract
The oxygen barrier properties of films obtained from waterborne polyurethane/silica hybrid dispersions were analyzed. Two different types of polyurethanes were used, based on poly(propylene glycol) and poly(1,4-butylene adipate). Three different strategies were followed in the preparation of the hybrid dispersions. In the first type of materials (series 1), the inorganic part came exclusively from the covalent incorporation of trifunctional silane groups into the polymeric chains. The other two series contained, in addition to the trifunctional silane groups, tetrafunctional silane groups either physically blended (series 2) or “in situ” generated (series 3). Materials of series 1 showed an increase of the oxygen permeability coefficient with the silane content. However, the other two types of materials presented just the opposite dependence. In this latter case, the systems containing “in situ” generated silica (series 3) presented higher permeability coefficient values, probably because of the steric hindrance imposed by the polyurethane that gave rise to silica networks containing silanol groups and free volume holes. Moreover, lower permeability coefficient values were obtained when larger size particles were added. This fact could mean that the polyurethane/silica interface effects were not totally hindered even when the organic/inorganic phases were covalently bonded.Keywords
This publication has 28 references indexed in Scilit:
- Waterborne hybrid polyurethane coatings functionalized with (3-aminopropyl)triethoxysilane: Adhesion propertiesProgress in Organic Coatings, 2013
- Oxygen permeability in thermoplastic polyurethanesJournal of Polymer Science Part B: Polymer Physics, 2012
- Gas separation properties of polyether-based polyurethane–silica nanocomposite membranesJournal of Membrane Science, 2011
- Oxygen permeability through poly(ethylene-co-vinyl acetate)/clay nanocomposites prepared by microwave irradiationJournal of Membrane Science, 2011
- Waterborne polyurethane dispersions obtained by the acetone process: A study of colloidal featuresJournal of Applied Polymer Science, 2010
- 6FDA‐TAPOB hyperbranched polyimide‐silica hybrids for gas separation membranesJournal of Applied Polymer Science, 2008
- Gas transport properties of segmented polyurethanes varying in the kind of soft segmentsSeparation and Purification Technology, 2007
- Effect of nucleating agents on crystallization kinetics of PETExpress Polymer Letters, 2007
- Effect of ionic content, solid content, degree of neutralization, and chain extension on aqueous polyurethane dispersions prepared by prepolymer methodJournal of Applied Polymer Science, 2005
- Gas permeability of model polyurethane networks and hybrid organic-inorganic materials: Relations with morphologyJournal of Applied Polymer Science, 1997