Tests of Cold-Formed Circular Tubular Braces under Cyclic Axial Loading
- 1 April 2003
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 129 (4) , 507-514
Abstract
This paper describes a series of tests to failure of fix-ended tubular braces subjected to cyclic concentric axial loading. The braces were made from cold-formed steel grade C350L0 (350 MPa nominal yield stress) circular hollow sections (CHS). Nine different diameter-to-thickness ratios in the range of 19<D/t<56 that have a moderate member slenderness in the range of 25<KL/r<41 were tested. The effects of three loading protocols on the inelastic hysteresis behavior of the CHS braces were examined. The CHS braces exhibited stable hysteresis behavior up to local buckling, and then showed considerable degradation in strength and ductility depending on KL/r and D/t ratios. First-cycle buckling loads were compared with design loads predicted using a number of steel specifications. The effects of section and member slenderness on strength, ductility, and energy absorption capacity of the braces were examined. The structure response factor (ductility index) was determined and used to derive new section slenderne...Keywords
This publication has 20 references indexed in Scilit:
- Void-Filled Cold-Formed Rectangular Hollow Section Braces Subjected to Large Deformation Cyclic Axial LoadingJournal of Structural Engineering, 2002
- Ductility Evaluation Procedure for Thin-Walled Steel StructuresJournal of Structural Engineering, 2000
- Failure predictions of thin-walled steel structures under cyclic loading2000
- Void-Filled SHS Beams Subjected to Large Deformation Cyclic BendingJournal of Structural Engineering, 1999
- Strength and Ductility of Concrete Encased Composite ColumnsJournal of Structural Engineering, 1999
- Cyclic behavior of thin-walled steel structures—numerical analysisThin-Walled Structures, 1998
- Analytical prediction of seismic behaviour for concentrically-braced steel systemsEarthquake Engineering & Structural Dynamics, 1997
- Seismic response of concentrically braced dual steel framesCanadian Journal of Civil Engineering, 1993
- Beam‐Column Behavior of Fabricated Steel Tubular MembersJournal of Structural Engineering, 1992
- Reinforced Concrete Structures1975