Pore Structure Regulation of RF-Derived Porous Carbons Using a Mixed-Level Design of Experiments for Lithium-Ion Battery Anode Materials
Open Access
Abstract
Resorcinol–formaldehyde (RF)-derived porous carbons have attracted considerable attention as anode materials for lithium-ion batteries because of their tunable pore structures and continuous carbon frameworks. However, conventional one-factor-at-a-time experiments do not readily allow the relative effects of multiple preparation factors to be systematically compared within a unified experimental framework. In this study, a mixed-level Design of Experiments (DOE) was employed to systematically investigate the effects of solid content, gelation temperature, R/C ratio, combined gelation and acid-washing/aging times, and drying method on the BET specific surface area, total pore volume, and dominant pore size of RF-derived porous carbons. Representative preparation conditions were subsequently selected to prepare PC-1 and PC-2. Both samples exhibited predominantly amorphous mesoporous carbon structures and similar electrochemical response profiles. PC-1 exhibited a higher reversible specific capacity and slightly more favorable electrochemical kinetics. These concurrent observations suggest an association between the pore-structure characteristics and electrochemical behavior of the selected samples. PC-1 delivered an initial charge capacity of 416.67 mAh g−1 with an initial Coulombic efficiency of 79.31%. After 200 cycles at 0.1 A g−1, it retained a reversible capacity of 307.86 mAh g−1, corresponding to a capacity retention of 88.64% relative to the second-cycle charge capacity. These results indicate that, within the investigated design space, the DOE approach provides an exploratory basis for jointly comparing the statistical evidence and practical effect magnitudes of the preparation factors and for selecting representative candidates with favorable pore-structure characteristics. The integration of DOE-based factor screening with subsequent structural and electrochemical validation provides an experimentally grounded framework for relating preparation parameters to pore-structure responses and lithium-storage behavior, thereby supporting the rational development of RF-derived porous carbon anodes for lithium-ion batteries.Keywords
This publication has 72 references indexed in Scilit:
- Degradation Pathways of Silicon‐Based Anodes in Lithium‐Ion BatteriesAdvanced Energy Materials, 2026
- Inner‐Wrinkled Porous Carbons via Soft‐Hard Coupling Assembly Strategy for Ultrahigh‐Capacity Lithium‐Ion BatteriesAdvanced Functional Materials, 2025
- Review on Graphite Anodes for Fast‐Charging Lithium‐Ion Batteries: Mechanism, Modification and CharacterizationsAdvanced Functional Materials, 2025
- Porous Carbon Nanorods Induced by Electrostatically Assembling Carbon Quantum Dots Within the Confined Hollow Space of Halloysite for Lithium‐Ion Battery AnodesAdvanced Functional Materials, 2025
- Porous Carbon Materials: from Traditional Synthesis, Machine Learning‐Assisted Design, to Their Applications in Advanced Energy Storage and ConversionAdvanced Functional Materials, 2025
- Carbon‐Based 3D Architectures as Anodes for Lithium‐Ion Battery SystemsChempluschem, 2024
- Flour‐Infused Dry Processed Electrode Enhancing Lithium‐Ion Battery PerformanceAdvanced Energy Materials, 2024
- Multifunctional Scavenger Boosts Cathode Interfacial Stability with Reduced Water Footprint for Direct Recycling of Spent Lithium‐Ion BatteriesAdvanced Materials, 2024
- Benchmarking the Match of Porous Carbon Substrate Pore Volume on Silicon Anode Materials for Lithium‐Ion BatteriesSmall, 2024
- Microporous carbon aerogel prepared through ambient pressure drying route as anode material for lithium ion cellsPolymers for Advanced Technologies, 2017