Characterization of Mixing Performance Induced by Double Curved Passive Mixing Structures in Microfluidic Channels
Open Access
- 13 May 2021
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 12 (5) , 556
Abstract
Functionalized sensor surfaces combined with microfluidic channels are becoming increasingly important in realizing efficient biosensing devices applicable to small sample volumes. Relaxing the limitations imposed by laminar flow of the microfluidic channels by passive mixing structures to enhance analyte mass transfer to the sensing area will further improve the performance of these devices. In this paper, we characterize the flow performance in a group of microfluidic flow channels with novel double curved passive mixing structures (DCMS) fabricated in the ceiling. The experimental strategy includes confocal imaging to monitor the stationary flow patterns downstream from the inlet where a fluorophore is included in one of the inlets in a Y-channel microfluidic device. Analyses of the fluorescence pattern projected both along the channel and transverse to the flow direction monitored details in the developing homogenization. The mixing index (MI) as a function of the channel length was found to be well accounted for by a double-exponential equilibration process, where the different parameters of the DCMS were found to affect the extent and length of the initial mixing component. The range of MI for a 1 cm channel length for the DCMS was 0.75–0.98, which is a range of MI comparable to micromixers with herringbone structures. Overall, this indicates that the DCMS is a high performing passive micromixer, but the sensitivity to geometric parameter values calls for the selection of certain values for the most efficient mixing.Keywords
This publication has 60 references indexed in Scilit:
- Enhancement of affinity-based biosensors: effect of sensing chamber geometry on sensitivityLab on a Chip, 2013
- Microfluidic Mixing: A ReviewInternational Journal of Molecular Sciences, 2011
- Label-free biological and chemical sensorsNanoscale, 2010
- Analysis and multi-criteria design optimization of geometric characteristics of grooved micromixerChemical Engineering Journal, 2010
- Silicon Photonic Microring Resonators for Quantitative Cytokine Detection and T-Cell Secretion AnalysisAnalytical Chemistry, 2010
- On multi-objective optimization of geometry of staggered herringbone micromixerMicrofluidics and Nanofluidics, 2008
- Enhancement of mixing and adsorption in microfluidic devices by shear-induced diffusion and topography-induced secondary flowPhysics of Fluids, 2008
- Chaotic mixing using periodic and aperiodic sequences of mixing protocols in a micromixerMicrofluidics and Nanofluidics, 2007
- Mixing enhancement of the passive microfluidic mixer with J-shaped baffles in the tee channelBiomedical Microdevices, 2006
- Characterization of passive microfluidic mixers fabricated using soft lithographyMicrofluidics and Nanofluidics, 2005