High‐Performance GA 2 PbI 4 /PVDF Composite for Energy Harvesting and Real‐Time Wireless Photodetection
- 16 February 2026
- journal article
- Published by Wiley in Advanced Optical Materials
- Vol. 14 (9)
Abstract
The increasing need for small, portable, and Internet of Things (IoT) devices requires exploring alternatives to conventional power sources. We present a flexible and self‐sustainable piezoelectric nanogenerator composed of 2D organic‐inorganic halide perovskite, namely guanidium lead iodide (GA 2 PbI 4 ) and polyvinylidene fluoride (PVDF) composite. By systematically incorporating optimized concentration of GA 2 PbI 4 into the PVDF matrix, the electroactive phase content of the composite could be substantially enhanced to a maximum value of 90% for a 4 wt.% loading of the perovskite. The piezoelectric coefficient consequently increases from ∼7.46 pC/N for pure PVDF to ∼39.5 pC/N for the 4% filler loading in the PVDF matrix. The optimized device generates an open circuit voltage of ∼60 V and a short circuit current of 6.4 µA. The device delivers a power density of ∼8.58 µW/cm 2 across a 12 MΩ load, sufficient to power small capacitors and an array of LEDs. In addition to the remarkable energy harvesting capability, the composite demonstrates appreciable photosensitivity under light irradiation, acting as a potential self‐powered photodetector. The fabricated self‐powered photodetector exhibits an increase in the short circuit current under light illumination, highlighting the potential of GA 2 PbI 4 /PVDF composites as wearable energy harvesting devices and real‐time, wireless, IoT‐enabled self‐powered photodetectors.Keywords
This publication has 62 references indexed in Scilit:
- Highly Efficient Noble‐Metal Free Photocatalytic Hydrogen Generation Using Water‐Stable 4,4′‐Vinylenedipyridine‐Based Halide PerovskitesSmall, 2025
- Lead‐Free Tin‐Based Halide Perovskites: A Bifunctional Catalyst for Oxygen Evolution and Oxygen Reduction Suitable for Sustainable Energy ApplicationsSmall, 2025
- Boosting Piezoelectricity by 3D Printing PVDF‐MoS2 Composite as a Conformal and High‐Sensitivity Piezoelectric SensorAdvanced Functional Materials, 2023
- 3D Patternable Supercapacitors from Hierarchically Architected Porous Fiber Composites for Wearable and Waterproof Energy StorageSmall, 2019
- Imbedded Nanocrystals of CsPbBr3 in Cs4PbBr6: Kinetics, Enhanced Oscillator Strength, and Application in Light‐Emitting DiodesAdvanced Materials, 2017
- Flexible Nanogenerators for Energy Harvesting and Self‐Powered ElectronicsAdvanced Materials, 2016
- Triboelectric Nanogenerator as an Active UV PhotodetectorAdvanced Functional Materials, 2014
- Harmonic‐Resonator‐Based Triboelectric Nanogenerator as a Sustainable Power Source and a Self‐Powered Active Vibration SensorAdvanced Materials, 2013
- A Nanogenerator for Energy Harvesting from a Rotating Tire and its Application as a Self‐Powered Pressure/Speed SensorAdvanced Materials, 2011
- Effect of crystallization temperature on the crystalline phase content and morphology of poly(vinylidene fluoride)Journal of Polymer Science Part B: Polymer Physics, 1994