Biplab Kumar Patra
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Biplab Kumar Patra has a total of 94 co-authors. Here are the top co-authors by number of shared publications:
- Narayan Pradhan
Indian Association for the Cultivation of Science
11 shared publications - Prabhanjan Pradhan
Materials Chemistry and Interfacial Engineering Department CSIR‐Institute of Minerals and Materials Technology Bhubaneshwar India
7 shared publications Amit K. Guria
Department of Materials Science and Centre for Advanced Materials, Indian Association for the Cultivation of Science, Kolkata, India 700032
6 shared publications- Amit Kumar Guria
Department of Chemistry
4 shared publications - Erik Christian Garnett
LMPV-Sustainable Energy Materials Department, AMOLF Institute, Science Park 104, Amsterdam, 1098XG, The Netherlands
4 shared publications Suresh Sarkar
Department of Materials Science and Center for Advanced Materials and ‡Polymer Science Unit, Indian Association for the Cultivation of Science, Kolkata, India 700032
4 shared publications
Latest Publications
- 12 November 2026
- Published by Wiley in Advanced Optical Materials
Harnessing the Pyro‐Phototronic Effect in Benzimidazolium Bismuth Bromide Perovskites for Enhanced Photodetection
Organic–inorganic halide perovskites (OIHPs) exhibit strong light–matter coupling and polarization‐assisted charge transport, making them promising for multifunctional optoelectronics. The pyro‐phototronic effect (PPE) linking photoinduced thermal excitation with polarization‐driven carrier separation enhances photodetection sensitivity but is typically restricted to non‐centrosymmetric materials with intrinsic polarization. Here, we demonstrate a pronounced PPE in a centrosymmetric, lead‐free benzimidazolium bismuth bromide perovskite, (Benz) 4 Bi 2 Br 10 (BBB) with an optical bandgap of 2.66 eV. Single‐crystal X‐ray diffraction confirms a monoclinic P2 1 /c phase with locally distorted [Bi 2 Br 10 ] 4 − octahedra. Piezoresponse force microscopy (PFM) reveals nanoscale polarization domains, while conductive atomic force microscopy (C‐AFM) and Kelvin probe force microscopy (KPFM) analyses confirm efficient p‐type transport and a high work function of 4.98 eV. Additionally, we have measured KPFM surface potential with variation of positive and negative voltages to further support nanoscale localized polarization. Photodetectors fabricated on interdigitated electrodes exhibit the distinct four‐stage transient signature of the PPE under 450–600 nm illumination and maintain excellent stability over 1800 on/off cycles. The response originates from interfacial polarization at the organic–inorganic boundary, which governs carrier separation and transport. These findings identify BBB as a stable, lead‐free perovskite platform where interfacial polarization enables efficient and broadband pyro‐phototronic photodetection.
- 12 November 2026
- Published by Wiley in Advanced Optical Materials
Harnessing the Pyro‐Phototronic Effect in Benzimidazolium Bismuth Bromide Perovskites for Enhanced Photodetection
Organic–inorganic halide perovskites (OIHPs) exhibit strong light–matter coupling and polarization‐assisted charge transport, making them promising for multifunctional optoelectronics. The pyro‐phototronic effect (PPE) linking photoinduced thermal excitation with polarization‐driven carrier separation enhances photodetection sensitivity but is typically restricted to non‐centrosymmetric materials with intrinsic polarization. Here, we demonstrate a pronounced PPE in a centrosymmetric, lead‐free benzimidazolium bismuth bromide perovskite, (Benz) 4 Bi 2 Br 10 (BBB) with an optical bandgap of 2.66 eV. Single‐crystal X‐ray diffraction confirms a monoclinic P2 1 /c phase with locally distorted [Bi 2 Br 10 ] 4 − octahedra. Piezoresponse force microscopy (PFM) reveals nanoscale polarization domains, while conductive atomic force microscopy (C‐AFM) and Kelvin probe force microscopy (KPFM) analyses confirm efficient p‐type transport and a high work function of 4.98 eV. Additionally, we have measured KPFM surface potential with variation of positive and negative voltages to further support nanoscale localized polarization. Photodetectors fabricated on interdigitated electrodes exhibit the distinct four‐stage transient signature of the PPE under 450–600 nm illumination and maintain excellent stability over 1800 on/off cycles. The response originates from interfacial polarization at the organic–inorganic boundary, which governs carrier separation and transport. These findings identify BBB as a stable, lead‐free perovskite platform where interfacial polarization enables efficient and broadband pyro‐phototronic photodetection.
- 10 August 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (32) , 325501
Molecularly induced β -phase enhancement and piezoelectric response in all-organic PVDF-F 16 CuPc composite films
Poly(vinylidene fluoride) (PVDF) is a fluoropolymer that is particularly promising for its electroactive, β -phase-dependent functional performance. This study elucidates an all-organic composite approach to effectively alter the fraction of polar β -phase formation in PVDF through the incorporation of an organic small molecule filler, fluorinated copper phthalocyanine (F 16 CuPc). Our studies using Fourier-transform infrared spectroscopy reveal an 88% enhancement of the polar β -phase fraction, particularly at an optimal filler concentration of 2 wt% F 16 CuPc, relative to pristine PVDF. Studies using X-ray diffraction measurements corroborate this phase transformation by showing a preferential stabilization of the β -phase and suppression of the nonpolar α -phase. Piezoresponse force microscopy further confirms the enhancement in nanoscale piezoelectric behavior, demonstrating a 20% increase in the piezoelectric coefficient ( d 33 ) upon optimal F 16 CuPc loading compared to pristine PVDF. This enhancement in β -phase fraction upon optimal F 16 CuPc incorporation is mainly driven by highly electronegative fluorine-mediated C–F···H–C interactions with the –CH 2 – dipole, along with electrostatic coupling between the Cu center and the –CF 2 – dipole. This cross-interaction between the fluorinated filler and fluoropolymer chains promotes conformational reorganization from the trans-gauche to the all-trans configuration, thereby stabilizing β -phase formation. Our studies reveal that fluorinated metal phthalocyanines act as efficient electroactive β -phase inducers in fluoropolymers without limiting mechanical compliance or electromechanical integration, thereby extending their applications in next-generation flexible energy harvesters, sensors, and wearable smart electromechanical devices.
- 10 August 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (32) , 325501
Molecularly induced β -phase enhancement and piezoelectric response in all-organic PVDF-F 16 CuPc composite films
Poly(vinylidene fluoride) (PVDF) is a fluoropolymer that is particularly promising for its electroactive, β -phase-dependent functional performance. This study elucidates an all-organic composite approach to effectively alter the fraction of polar β -phase formation in PVDF through the incorporation of an organic small molecule filler, fluorinated copper phthalocyanine (F 16 CuPc). Our studies using Fourier-transform infrared spectroscopy reveal an 88% enhancement of the polar β -phase fraction, particularly at an optimal filler concentration of 2 wt% F 16 CuPc, relative to pristine PVDF. Studies using X-ray diffraction measurements corroborate this phase transformation by showing a preferential stabilization of the β -phase and suppression of the nonpolar α -phase. Piezoresponse force microscopy further confirms the enhancement in nanoscale piezoelectric behavior, demonstrating a 20% increase in the piezoelectric coefficient ( d 33 ) upon optimal F 16 CuPc loading compared to pristine PVDF. This enhancement in β -phase fraction upon optimal F 16 CuPc incorporation is mainly driven by highly electronegative fluorine-mediated C–F···H–C interactions with the –CH 2 – dipole, along with electrostatic coupling between the Cu center and the –CF 2 – dipole. This cross-interaction between the fluorinated filler and fluoropolymer chains promotes conformational reorganization from the trans-gauche to the all-trans configuration, thereby stabilizing β -phase formation. Our studies reveal that fluorinated metal phthalocyanines act as efficient electroactive β -phase inducers in fluoropolymers without limiting mechanical compliance or electromechanical integration, thereby extending their applications in next-generation flexible energy harvesters, sensors, and wearable smart electromechanical devices.
Lead‐Free Hybrid Halide Perovskite for Piezoelectric Energy Harvesting
Halide perovskites are widely recognized for their exceptional optoelectronic properties, cost‐effective fabrication, and tunable chemical compositions, which make them highly versatile in photovoltaics, LEDs, and mechanical energy harvesting. Here we have developed a novel manganese‐based lead‐free Benzyl trimethyl ammonium manganese bromide (BTMB) perovskite in the polar non‐centro symmetric space group P2 1 system, which shows strong piezoresponse properties measured using sophisticated Piezo Force Microscopy (PFM) and Switching Spectroscopy Piezo Force Microscopy (SS‐PFM). BTMB exhibits a direct bandgap of 4.3 eV along with a bright luminescence in the visible region due to ligand‐to‐metal charge transfer mechanism. The material demonstrates a polarization saturation value of 4.0 µC/cm 2 with d 33 value of 3.95 pC/N measured using quasi electrostatic d 33 meter on a pellet of thickness 1.5 mm. PFM results show notable ±180 0 phase changes upon application of bias with characteristic butterfly and hysteresis loop, a clear indication of reversal of polarization switching. Further, we have fabricated a mechanical energy‐harvesting device by incorporating BTMB into polydimethylsiloxane (PDMS) polymer matrix containing 30 weight percent of the material to achieve a peak output voltage of 1.1 V and a peak current density of 250 nA/cm 2 with an achievable output power of ∼1.1 µW/cm 2 at RT.
Lead‐Free Hybrid Halide Perovskite for Piezoelectric Energy Harvesting
Halide perovskites are widely recognized for their exceptional optoelectronic properties, cost‐effective fabrication, and tunable chemical compositions, which make them highly versatile in photovoltaics, LEDs, and mechanical energy harvesting. Here we have developed a novel manganese‐based lead‐free Benzyl trimethyl ammonium manganese bromide (BTMB) perovskite in the polar non‐centro symmetric space group P2 1 system, which shows strong piezoresponse properties measured using sophisticated Piezo Force Microscopy (PFM) and Switching Spectroscopy Piezo Force Microscopy (SS‐PFM). BTMB exhibits a direct bandgap of 4.3 eV along with a bright luminescence in the visible region due to ligand‐to‐metal charge transfer mechanism. The material demonstrates a polarization saturation value of 4.0 µC/cm 2 with d 33 value of 3.95 pC/N measured using quasi electrostatic d 33 meter on a pellet of thickness 1.5 mm. PFM results show notable ±180 0 phase changes upon application of bias with characteristic butterfly and hysteresis loop, a clear indication of reversal of polarization switching. Further, we have fabricated a mechanical energy‐harvesting device by incorporating BTMB into polydimethylsiloxane (PDMS) polymer matrix containing 30 weight percent of the material to achieve a peak output voltage of 1.1 V and a peak current density of 250 nA/cm 2 with an achievable output power of ∼1.1 µW/cm 2 at RT.
- 16 February 2026
- Published by Wiley in Advanced Optical Materials
- Vol. 14 (9)
High‐Performance GA 2 PbI 4 /PVDF Composite for Energy Harvesting and Real‐Time Wireless Photodetection
The increasing need for small, portable, and Internet of Things (IoT) devices requires exploring alternatives to conventional power sources. We present a flexible and self‐sustainable piezoelectric nanogenerator composed of 2D organic‐inorganic halide perovskite, namely guanidium lead iodide (GA 2 PbI 4 ) and polyvinylidene fluoride (PVDF) composite. By systematically incorporating optimized concentration of GA 2 PbI 4 into the PVDF matrix, the electroactive phase content of the composite could be substantially enhanced to a maximum value of 90% for a 4 wt.% loading of the perovskite. The piezoelectric coefficient consequently increases from ∼7.46 pC/N for pure PVDF to ∼39.5 pC/N for the 4% filler loading in the PVDF matrix. The optimized device generates an open circuit voltage of ∼60 V and a short circuit current of 6.4 µA. The device delivers a power density of ∼8.58 µW/cm 2 across a 12 MΩ load, sufficient to power small capacitors and an array of LEDs. In addition to the remarkable energy harvesting capability, the composite demonstrates appreciable photosensitivity under light irradiation, acting as a potential self‐powered photodetector. The fabricated self‐powered photodetector exhibits an increase in the short circuit current under light illumination, highlighting the potential of GA 2 PbI 4 /PVDF composites as wearable energy harvesting devices and real‐time, wireless, IoT‐enabled self‐powered photodetectors.
- 16 February 2026
- Published by Wiley in Advanced Optical Materials
- Vol. 14 (9)
High‐Performance GA 2 PbI 4 /PVDF Composite for Energy Harvesting and Real‐Time Wireless Photodetection
The increasing need for small, portable, and Internet of Things (IoT) devices requires exploring alternatives to conventional power sources. We present a flexible and self‐sustainable piezoelectric nanogenerator composed of 2D organic‐inorganic halide perovskite, namely guanidium lead iodide (GA 2 PbI 4 ) and polyvinylidene fluoride (PVDF) composite. By systematically incorporating optimized concentration of GA 2 PbI 4 into the PVDF matrix, the electroactive phase content of the composite could be substantially enhanced to a maximum value of 90% for a 4 wt.% loading of the perovskite. The piezoelectric coefficient consequently increases from ∼7.46 pC/N for pure PVDF to ∼39.5 pC/N for the 4% filler loading in the PVDF matrix. The optimized device generates an open circuit voltage of ∼60 V and a short circuit current of 6.4 µA. The device delivers a power density of ∼8.58 µW/cm 2 across a 12 MΩ load, sufficient to power small capacitors and an array of LEDs. In addition to the remarkable energy harvesting capability, the composite demonstrates appreciable photosensitivity under light irradiation, acting as a potential self‐powered photodetector. The fabricated self‐powered photodetector exhibits an increase in the short circuit current under light illumination, highlighting the potential of GA 2 PbI 4 /PVDF composites as wearable energy harvesting devices and real‐time, wireless, IoT‐enabled self‐powered photodetectors.
- Open Access
- 28 January 2026
- Published by Wiley in Small Science
- Vol. 6 (1)
Versatile Metal Phthalocyanine‐Based Memristive Nanowire Network: Unraveling the Dynamics of Digital to Analog Switching
Organic memristors with tunable resistive switching (RS) are promising candidates for brain‐inspired neuromorphic computing. This study reports a self‐assembled organic nanowire network memristor based on copper (II) hexadecafluoro‐phthalocyanine (F 16 CuPc), exhibiting digital, multilevel, and analog switching through compliance current ( I CC ) modulation. Current–voltage and impedance analyses reveal that the transition in RS behavior is primarily driven by a shift from trap‐limited to trap‐free space charge‐limited conduction as I CC increases. In low I CC , Ag + ‐cation migration plays a central role in conduction through redox‐assisted Ag–F/ Ag–π interwire interactions, causing abrupt switching. In contrast, higher allowed injection at high I CC enables predominant intrawire current conduction via π–π intermolecular interactions, resulting in a gradual RS transition. The novelty of this work lies in the controlled growth of nanowire structures via self‐assembled 2D molecular stacking, which is key to enabling multifunctionality within a pristine, nanowire network‐based molecular memristive system designed for hybrid digital‐neuromorphic applications. These findings significantly broaden the functional scope of metal phthalocyanine‐based nanowire network architecture, advancing their application toward flexible, energy‐efficient, multifunctional, and wearable smart electronics.
- 28 January 2026
- Published by Wiley in Small Science
- Vol. 6 (1)
Open AccessVersatile Metal Phthalocyanine‐Based Memristive Nanowire Network: Unraveling the Dynamics of Digital to Analog Switching
Organic memristors with tunable resistive switching (RS) are promising candidates for brain‐inspired neuromorphic computing. This study reports a self‐assembled organic nanowire network memristor based on copper (II) hexadecafluoro‐phthalocyanine (F 16 CuPc), exhibiting digital, multilevel, and analog switching through compliance current ( I CC ) modulation. Current–voltage and impedance analyses reveal that the transition in RS behavior is primarily driven by a shift from trap‐limited to trap‐free space charge‐limited conduction as I CC increases. In low I CC , Ag + ‐cation migration plays a central role in conduction through redox‐assisted Ag–F/ Ag–π interwire interactions, causing abrupt switching. In contrast, higher allowed injection at high I CC enables predominant intrawire current conduction via π–π intermolecular interactions, resulting in a gradual RS transition. The novelty of this work lies in the controlled growth of nanowire structures via self‐assembled 2D molecular stacking, which is key to enabling multifunctionality within a pristine, nanowire network‐based molecular memristive system designed for hybrid digital‐neuromorphic applications. These findings significantly broaden the functional scope of metal phthalocyanine‐based nanowire network architecture, advancing their application toward flexible, energy‐efficient, multifunctional, and wearable smart electronics.
Functionalized Indazaboles: A New Class of Low‐k Interfacial Layer for Multi‐Polar Charge Transport in Organic Field Effect Transistors
Demonstration of high‐performance field effect transistors (FETs) necessitates designing of ordered semiconductors as well as dielectric materials with a low degree of dipolar disorder. Majority of efforts for improving the performance of FETs has been directed toward modifying the semiconducting layer. Here, indazaboles, which are a class of relatively unexplored tetra‐coordinated organoboranes, are utilized as an active interfacial layer in a field effect transistor structure. It is shown that with suitable functionalization of the indazabole core, it is possible to tune the dielectric constant ranging from 2.2 to 5.1. Such wide tunability of the dielectric constant makes these materials fundamentally interesting as a platform to controllably probe the effect of interfacial dipolar disorder on the field effect charge transport. These indazaboles, when introduced as a low k‐modifying layer at the transport interface on conventional oxide dielectric result in significant enhancement of both electron and hole field effect mobility by up to six times. The results bring out the applicability of this new class of indazabole materials as dielectric material supporting multi‐polar transport and provide insight for developing high performance field effect transistor through suitable interfacial chemical design.
Functionalized Indazaboles: A New Class of Low‐k Interfacial Layer for Multi‐Polar Charge Transport in Organic Field Effect Transistors
Demonstration of high‐performance field effect transistors (FETs) necessitates designing of ordered semiconductors as well as dielectric materials with a low degree of dipolar disorder. Majority of efforts for improving the performance of FETs has been directed toward modifying the semiconducting layer. Here, indazaboles, which are a class of relatively unexplored tetra‐coordinated organoboranes, are utilized as an active interfacial layer in a field effect transistor structure. It is shown that with suitable functionalization of the indazabole core, it is possible to tune the dielectric constant ranging from 2.2 to 5.1. Such wide tunability of the dielectric constant makes these materials fundamentally interesting as a platform to controllably probe the effect of interfacial dipolar disorder on the field effect charge transport. These indazaboles, when introduced as a low k‐modifying layer at the transport interface on conventional oxide dielectric result in significant enhancement of both electron and hole field effect mobility by up to six times. The results bring out the applicability of this new class of indazabole materials as dielectric material supporting multi‐polar transport and provide insight for developing high performance field effect transistor through suitable interfacial chemical design.
- Open Access
- 29 September 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 61 (87) , 16958-16961
Linkage-dependent nano-conductivity of free-standing covalent organic membranes
The linkage-dependent nano-conductivity of interfacially grown free-standing covalent organic membranes with β-ketoenamine, imine, and vinylene linkages has been explored using contact mode conductive atomic force microscopy.
- 29 September 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 61 (87) , 16958-16961
Open AccessLinkage-dependent nano-conductivity of free-standing covalent organic membranes
The linkage-dependent nano-conductivity of interfacially grown free-standing covalent organic membranes with β-ketoenamine, imine, and vinylene linkages has been explored using contact mode conductive atomic force microscopy.
- 29 April 2025
- Published by Wiley in Chemnanomat
- Vol. 11 (4)
Emerging New‐generation Colloidal Halide Perovskite Nanocrystals with White Photoluminescence
Recently, halide perovskites have sparked significant research interest as novel phosphor materials for white light‐emitting diodes (WLEDs) due to their high photoluminescence efficiency, adjustable fluorescence properties, and straightforward fabrication processes. Efforts have also been directed towards simplifying WLED fabrication through the development of single‐component white‐emitting phosphors, with certain halide perovskites proving suitable for this purpose. This review specifically focuses on various design approaches and emission mechanisms of white photoluminescent colloidal halide perovskite nanocrystals (CHPN) and their derivatives, irrespective of dimensional and materials types of perovskite. We compare three distinct sources of white light: narrow band edge free excitonic emission, dopant emission, and other broad‐band emissions. The review supplements the potential of CHPN as single phosphors for WLEDs, highlighting their role in achieving cost‐effective and environment friendly lighting solutions. Recent advancements and associated limitations of WLED fabricated with white‐emitting CHPN are thoroughly assessed. Finally, we outline current challenges and propose future research directions aimed at achieving high‐quality CHPN with white photoluminescence that meets commercial standards.
- 29 April 2025
- Published by Wiley in Chemnanomat
- Vol. 11 (4)
Emerging New‐generation Colloidal Halide Perovskite Nanocrystals with White Photoluminescence
Recently, halide perovskites have sparked significant research interest as novel phosphor materials for white light‐emitting diodes (WLEDs) due to their high photoluminescence efficiency, adjustable fluorescence properties, and straightforward fabrication processes. Efforts have also been directed towards simplifying WLED fabrication through the development of single‐component white‐emitting phosphors, with certain halide perovskites proving suitable for this purpose. This review specifically focuses on various design approaches and emission mechanisms of white photoluminescent colloidal halide perovskite nanocrystals (CHPN) and their derivatives, irrespective of dimensional and materials types of perovskite. We compare three distinct sources of white light: narrow band edge free excitonic emission, dopant emission, and other broad‐band emissions. The review supplements the potential of CHPN as single phosphors for WLEDs, highlighting their role in achieving cost‐effective and environment friendly lighting solutions. Recent advancements and associated limitations of WLED fabricated with white‐emitting CHPN are thoroughly assessed. Finally, we outline current challenges and propose future research directions aimed at achieving high‐quality CHPN with white photoluminescence that meets commercial standards.
- 27 April 2025
- Published by Wiley in Chemistry – A European Journal
- Vol. 31 (29) , e202500725
S ‐Heterocyclic s ‐Indacenodifluorene: Synthesis, Properties, and Thermally Tunable Ambipolar Field‐Effect Mobility
Design of semiconducting materials with facile control of charge transport and the nature of charge carriers is essential for realizing niche applications with organic electronics. Described herein are the synthesis, crystal structure, and analysis of the electronic properties of a four‐stage redox amphoteric S ‐heterocyclic s ‐indacenodifluorene 6 , including the study of its ambipolar charge carrier mobility ( µ h and µ e ) in organic field‐effect transistor (OFET) devices. Despite being electron‐rich, our investigation revealed reversible reduction potentials for 6 in the cyclic voltammetry, which is attributed to the recovery of locally aromatic thiophene and cyclopentadienyl anion units upon electron injection for the two antiaromatic S ‐heterocyclic as ‐indacene units in accordance with the Glidewell‐Lloyd rule of aromaticity. In line with this, we observed an interesting thermal tunability of the nature of charge carriers from p‐type to balanced ambipolar to n‐type charge transport with reasonable semiconductor mobility in all regimes of transport. This behavior is correlated with the modification of the transport levels upon annealing of the semiconductor and possible increase in the extent of π‐electron delocalization with increasing temperature. This proof‐of‐concept tunability of the nature of charge transport indicates the efficacy of our molecular design.
- 27 April 2025
- Published by Wiley in Chemistry – A European Journal
- Vol. 31 (29) , e202500725
S ‐Heterocyclic s ‐Indacenodifluorene: Synthesis, Properties, and Thermally Tunable Ambipolar Field‐Effect Mobility
Design of semiconducting materials with facile control of charge transport and the nature of charge carriers is essential for realizing niche applications with organic electronics. Described herein are the synthesis, crystal structure, and analysis of the electronic properties of a four‐stage redox amphoteric S ‐heterocyclic s ‐indacenodifluorene 6 , including the study of its ambipolar charge carrier mobility ( µ h and µ e ) in organic field‐effect transistor (OFET) devices. Despite being electron‐rich, our investigation revealed reversible reduction potentials for 6 in the cyclic voltammetry, which is attributed to the recovery of locally aromatic thiophene and cyclopentadienyl anion units upon electron injection for the two antiaromatic S ‐heterocyclic as ‐indacene units in accordance with the Glidewell‐Lloyd rule of aromaticity. In line with this, we observed an interesting thermal tunability of the nature of charge carriers from p‐type to balanced ambipolar to n‐type charge transport with reasonable semiconductor mobility in all regimes of transport. This behavior is correlated with the modification of the transport levels upon annealing of the semiconductor and possible increase in the extent of π‐electron delocalization with increasing temperature. This proof‐of‐concept tunability of the nature of charge transport indicates the efficacy of our molecular design.
- 17 March 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (12) , 4961-4968
Electrolyte-Gated Ruddlesden–Popper Perovskites for Switchable Optoelectronic Universal Logic Gates
Electrolyte-gated semiconductor devices are the building blocks for next-generation optoelectronics due to their memory effect and slow ion kinetics, mimicking synapses. Halide perovskites have memory effects, mixed electronic and ionic conductivity, and optical responses, which are extremely promising for this application. However, most high-performance halide perovskites are unstable in liquid electrolytes due to solvent intercalation. We have stabilized the Ruddlesden-Popper 2D perovskites by introducing an ion-transporting membrane separator between the thin film and a quasi-solid-state gel electrolyte interface. Here, we demonstrate an electrolyte-gated three-terminal device that operates as a switchable OR, AND, and a universal NOR gate, with one input being electrical and the other being optical, based on negative, zero, and positive gate voltages, respectively. We also demonstrated all electrical XOR gates, electrical and optical NOT, and BUFFER gates using the same. Overall, this work will open new opportunities for halide perovskites and contribute to a deeper understanding of their photophysical properties.
- 17 March 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (12) , 4961-4968
Electrolyte-Gated Ruddlesden–Popper Perovskites for Switchable Optoelectronic Universal Logic Gates
Electrolyte-gated semiconductor devices are the building blocks for next-generation optoelectronics due to their memory effect and slow ion kinetics, mimicking synapses. Halide perovskites have memory effects, mixed electronic and ionic conductivity, and optical responses, which are extremely promising for this application. However, most high-performance halide perovskites are unstable in liquid electrolytes due to solvent intercalation. We have stabilized the Ruddlesden-Popper 2D perovskites by introducing an ion-transporting membrane separator between the thin film and a quasi-solid-state gel electrolyte interface. Here, we demonstrate an electrolyte-gated three-terminal device that operates as a switchable OR, AND, and a universal NOR gate, with one input being electrical and the other being optical, based on negative, zero, and positive gate voltages, respectively. We also demonstrated all electrical XOR gates, electrical and optical NOT, and BUFFER gates using the same. Overall, this work will open new opportunities for halide perovskites and contribute to a deeper understanding of their photophysical properties.