Elucidating the mechanism behind the laccase-mediated modification of poly(ethersulfone)
Open Access
- 30 July 2018
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (48) , 27101-27110
Abstract
Laccase-mediated oligomerisation of 4-hydroxybenzoic acid (4-HBA) derivatives and simultaneous in situ surface modification has proven to be a cost-effective, easily applicable and eco-friendly strategy for preventing biofouling of poly(ethersulfone) (PES) water filtration membranes. Modification of the membrane surface has previously been hypothesised to occur through covalent bonding of enzymatically generated phenolic radicals to the polymeric membrane. The current study shows, however, that in situ formation of soluble phenolic oligomers does not result in covalent membrane modification. We studied in situ laccase-mediated oligomerisation of custom-synthesised positively charged and commercially available negatively charged monomeric phenols, and demonstrated that their mode of binding to PES is not covalent. In addition, soluble, non-soluble and on-resin PES model compounds were synthesised and used in the laccase-mediated oligomerisation of 4-HBA. Covalent bond formation between these model compounds and (oligomeric) 4-HBA could not be observed either. Furthermore, extensive washing of PES membranes modified through laccase-mediated oligomerisation of 4-HBA resulted in substantial discolouration of the membrane surface, showing that the layer of oligomerised phenolics could easily be removed. Altogether, it was concluded that laccase-assisted modification of PES membranes resulted from strong physical adsorption of phenolic oligomers and polymers rather than from covalent bonding of those.Keywords
This publication has 40 references indexed in Scilit:
- Stabilization of layer-by-layer assembled nanofiltration membranes by crosslinking via amide bond formation and siloxane bond formationJournal of Membrane Science, 2013
- Mild and Highly Flexible Enzyme-Catalyzed Modification of Poly(ethersulfone) MembranesACS Applied Materials & Interfaces, 2011
- Effect of LbL surface modification on characteristics and performances of cellulose acetate nanofiltration membranesDesalination, 2011
- Carbon nanotube blended polyethersulfone membranes for fouling control in water treatmentWater Research, 2011
- Laccase‐Mediated Wood Surface FunctionalizationEngineering in Life Sciences, 2008
- Solvent-Resistant Nanofiltration Membranes Based on Multilayered Polyelectrolyte ComplexesChemistry of Materials, 2008
- Transport studies of BSA, lysozyme and ovalbumin through chitosan/polystyrene sulfonate multilayer membraneJournal of Membrane Science, 2007
- Fouling in membrane bioreactors used in wastewater treatmentJournal of Membrane Science, 2006
- EFFECT OF POLYVINYLPYRROLIDONE ADDITIVE ON THE PORE SIZE AND THE PORE SIZE DISTRIBUTION OF POLYETHERSULFONE (VICTREX) MEMBRANESChemical Engineering Communications, 1993
- New Mannich base ligandsAustralian Journal of Chemistry, 1984