Analysis and design of the quadratic buck-boost converter as a high-power-factor driver for power-LED lamps
- 1 November 2010
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 25 (1553572X) , 2541-2546
Abstract
In this paper the quadratic buck-boost (QBB) converter is proposed as a high-power-factor off-line power supply for power-LED lamps. The QBB converter features just one controlled switch and two inductors and is able to supply a solid-state lamp from the mains providing high power factor and good efficiency. In the paper, the QBB converter is analyzed and a design methodology is proposed. It is demonstrated that with a careful design of the converter, the filter capacitances can be made small enough so that film capacitors may be used. In this way, the converter mean time between failures (MTBF) can be made as high as that of the solid-state lamp. A design example for a 70 W converter supplied from a 230 V/50 Hz mains for street lighting applications is shown. Finally, experimental results from a laboratory prototype are also presented.Keywords
This publication has 19 references indexed in Scilit:
- High frequency PWM dimming technique for high power factor converters in LED lighting2010
- A novel passive off-line light-emitting diode (LED) driver with long lifetime2010
- Electronic driver without electrolytic capacitor for dimming High Brightness LEDs2009
- LED Driver Circuit with Series-Input-Connected Converter Cells Operating in Continuous Conduction ModeIEEE Transactions on Power Electronics, 2009
- A General Photo-Electro-Thermal Theory for Light Emitting Diode (LED) SystemsIEEE Transactions on Power Electronics, 2009
- Comparative Study on the Structural Designs of LED Devices and Systems Based on the General Photo-Electro-Thermal TheoryIEEE Transactions on Power Electronics, 2009
- Dimming of High-Brightness LEDs by Means of Luminous Flux Thermal EstimationIEEE Transactions on Power Electronics, 2009
- A Universal-Input Single-Stage High-Power-Factor Power Supply for HB-LEDs Based on Integrated Buck-Flyback Converter2009
- Single-Stage Offline SEPIC Converter with Power Factor Correction to Drive High Brightness LEDs2009
- Analysis of a High-Power-Factor Electronic Ballast for High Brightness Light Emitting Diodes2005