Soft Magnetic Properties of Fe-Co-Al-O Films with High Saturation Magnetization.
Authors:
- K. ShintakuKSK. Shintaku
- K. YamakawaKYK. Yamakawa
- K. OuchiKOK. Ouchi
- 1 January 2003
- journal article
- Published by The Magnetics Society of Japan in Journal of the Magnetics Society of Japan
- Vol. 27 (4) , 367-370
Abstract
Fe-Co and Fe-Co-Al-O films were prepared by RF magnetron sputtering in Ar gas atmosphere. An Hch (coercivity in the hard axis direction) value of 11 Oe (0.88 kA/m) was obtained for an Fe-Co film by choosing proper sputtering condiition. Hch was greatly decreased by using Al2O3 addition of 1% and a Ni-Fe underlayer of 0.5-12 nm, resulting in a value less than 1 Oe (80 A/m) for a film thickness range from 50 nm to 600 nm. Amorphous Co-Zr-Nb soft magnetic underlayer films are also effective for obtaining Hch values less than 1 Oe (80 A/m). It is finally concluded that combination of a small amount of Al2O3 addition and a soft magnetic underlayer film is essential for obtaining low Hch with high saturation magnetic flux density of 2.4 T in a wide range of film thicknesses.Keywords
This publication has 4 references indexed in Scilit:
- Soft Magnetic Properties and Microstructure of NiFe/FeCo/NiFe Thin Films with Large Saturation Magnetization.Journal of the Magnetics Society of Japan, 2002
- Soft Magnetic Properties of High Bs Fe-N-Al-O Films Prepared by Sputtering.Journal of the Magnetics Society of Japan, 2000
- Soft high saturation magnetization (Fe/sub 0.7/Co/sub 0.3/)/sub 1-x/N/sub x/ thin films for inductive write headsIEEE Transactions on Magnetics, 2000
- Texture, microstructure, and magnetic properties of Fe-Co alloy films formed by sputtering at an oblique angle of incidenceJournal of Applied Physics, 1993