Open Loop Recycling of Recycled Polypropylene for Motorcycle Saddle Application
Open Access
- 7 July 2018
- journal article
- Published by Universitas Gadjah Mada in ASEAN Journal of Chemical Engineering
- Vol. 17 (2) , 60-76
Abstract
This research investigated the possibility of using polymer blends of virgin andrecycled polypropylene (PP) for a motorcycle saddle application. Three differentrecycled PPs obtained from different sources contained carbon black (CB). Specimenswere prepared by injection molding for mechanical property testing and colorcharacterization whereas scraps from runners were used for thermal property testing. Itwas found that tensile and flexural properties of recycled PPs were better than those ofvirgin PP due to the fact that recycled PPs contained CB which is a reinforcing material.These properties were improved as the amount of recycled PP added increased. Sincerecycled PPs are strong materials, they are hence brittle resulting in lowering impactstrength and percent elongation. The recycled PP sources and compatibility betweenvirgin and recycled PPs strongly influence the blends' properties. The melt flow index ofthe blends increased as the amount of the recycled PP increased because of the shortpolymer chains of recycled PP resulting from earlier processing. Blending virgin PP withrecycled PP not only improves its properties, but also reduces raw material costs in therange of 5-13%. The advantage of open loop recycling is a wider recycled plasticmarket.Keywords
This publication has 20 references indexed in Scilit:
- Properties characterisation of polycarbonate and multi-walled carbon nanotubes composites prepared by solution techniqueAsia-Pacific Journal of Chemical Engineering, 2015
- Thermal and mechanical properties of injection molded recycled high density polyethylene blends with virgin isotactic polypropyleneMaterials & Design (1980-2015), 2013
- Effect of surface modification of carbon black (CB) on the morphology and crystallization of poly(ethylene terephthalate)/CB masterbatchColloids and Surfaces A: Physicochemical and Engineering Aspects, 2012
- Electrical and thermal properties of polyamide 12 composites with hybrid fillers systems of multiwalled carbon nanotubes and carbon blackComposites Science and Technology, 2011
- The response of carbon black filled high-density polyethylene to microwave processingJournal of Materials Processing Technology, 2010
- Improving the Thermal Behavior of Poly(propylene) by Addition of Spherical Silica NanoparticlesMacromolecular Materials and Engineering, 2010
- Electrical and mechanical properties of acrylonitrile rubber and linear low density polyethylene composites in the vicinity of the percolation thresholdMaterials & Design (1980-2015), 2009
- Effective properties of carbon black filled natural rubber: Experiments and modelingComposites Part A: Applied Science and Manufacturing, 2008
- An innovative method to reduce percolation threshold of carbon black filled immiscible polymer blendsComposites Part A: Applied Science and Manufacturing, 2008
- Examination of the possibility of recycling and utilizing recycled polyethylene and polypropyleneMaterials & Design (1980-2015), 2008