Influence of Body-Biasing, Supply Voltage, and Temperature on the Detection of Resistive Short Defects in FDSOI Technology
- 6 February 2017
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 16 (3) , 417-430
Abstract
This paper presents an in-depth analysis of the impact of body-biasing, supply voltage and temperature on the detection of resistive short defects in FDSOI technology. Three types of short defects are considered for our investigation, namely resistive short to ground terminal (GND), resistive short to power supply terminal (VDD) and inter-gate resistive bridging defect. The two implementation options offered by the technology, i.e. Low VT (LVT) and Regular VT (RVT) devices are also studied. Defect detectability is evaluated in the context of logic test using the concept of critical resistance. The optimal body-biasing, supply voltage and temperature settings to achieve the maximum defect coverage are determined through HSPICE simulations using a didactic circuit implemented with 28nm UTBB FDSOI gate library. An analytical analysis is also proposed based on the ON-resistance model of P and N networks, which permits to evaluate the value of the critical resistance without performing fault simulations. In addition, this work quantifies the individual as well as the combined improvements in detection brought by body-biasing, supply voltage and temperature settings for the different defect types and different implementations.Keywords
Funding Information
- Laboratory of Informatics, Robotics and Microelectronics of Montpellier, CNRS and University of Montpellier
This publication has 12 references indexed in Scilit:
- Impact of VT and Body-Biasing on Resistive Short Detection in 28nm UTBB FDSOI -- LVT and RVT Configurations2016
- Comparative study of Bulk, FDSOI and FinFET technologies in presence of a resistive short defect2016
- Resistive bridge defect detection enhancement under parameter variations combining Low VDD and body bias in a delay based testMicroelectronics Reliability, 2012
- Multi-$V_{T}$ UTBB FDSOI Device Architectures for Low-Power CMOS CircuitIEEE Transactions on Electron Devices, 2011
- New sub-20nm transistors2011
- Innovative Materials, Devices, and CMOS Technologies for Low-Power Mobile MultimediaIEEE Transactions on Electron Devices, 2007
- Dynamic Critical Resistance: A Timing-Based Critical Resistance Model for Statistical Delay Testing of Nanometer ICs2007
- Resistive Bridge fault model evolution from conventional to ultra deep submicron2005
- Turning silicon on its edgeIEEE Circuits and Devices Magazine, 2004
- The concept of resistance interval: a new parametric model for realistic resistive bridging fault2002