Texture Development in Aluminum Alloys with High Magnesium Content
Open Access
Abstract
The evolution of texture in the AlMg6Mn0.7 (1565 ch) alloy throughout the entire cycle of its thermomechanical treatment has been studied. Using this alloy as an example, a new way is shown to control the texture development, which is applicable to alloys with high magnesium content. An integrated approach is applied, including optical and electron microscopy, as well as X-ray diffraction analysis, the determination of mechanical properties and texture modeling using algorithms of the crystallographic plasticity theory. All stages of the thermomechanical treatment have been studied, namely the development of the deformation structure out of the as-cast structure in the reversing hot-rolling stand, continuous hot rolling, cold rolling and final recrystallization annealing. The study showed that second phase particles are the main source of recrystallization nuclei at all stages of high temperature thermomechanical treatment. The importance of these particles increases when the Zener-Hollomon parameter increases. To obtain the maximum possible proportion of a random texture, thermomechanical processing must be carried out at high Zener-Hollomon parameters. However, the temperature should not interfere with the complete recrystallization process at the same time. After cold rolling and recrystallization annealing at temperatures equal or greater than 350 °C, a large proportion of random texture is formed, and the properties of the metal are almost isotropic.Keywords
Funding Information
- Russian Science Foundation (18-79-10099-P)
This publication has 36 references indexed in Scilit:
- Control of texture and earing in aluminium alloy AA 3105 sheet for packaging applicationsMaterials Science and Engineering: A, 2012
- Constituent Particle Break‐Up During Hot Rolling of AA 5182Advanced Engineering Materials, 2010
- Polycrystal-plasticity simulation of six and eight ears in deep-drawn aluminum cupsMaterials Science and Engineering: A, 2007
- Quantitative 3D characterization of intermetallic phases in an Al–Mg industrial alloy by X-ray microtomographyScripta Materialia, 2006
- Simulation of earing profiles from texture data by means of a visco-plastic self-consistent polycrystal plasticity approachMaterials Science and Engineering: A, 2004
- Through-process modelling of the impact of intermediate annealing on texture evolution in aluminium alloy AA 5182Modelling and Simulation in Materials Science and Engineering, 2003
- Comparison of recrystallization and recrystallization textures in cold-rolled DC and CC AA 5182 aluminum alloysMaterials Science and Engineering: A, 2003
- Thermomechanical Control in Aluminium Sheet ProductionMaterials Science Forum, 2003
- Modeling of Texture and Texture-Related Properties during the Thermo-Mechanical Processing of Aluminum SheetsMaterials Science Forum, 2003
- The nucleation of recrystallization at second phase particles in deformed aluminiumActa Metallurgica, 1977