Direct measurement of relative stopping power maps of prosthesis devices and synthetic materials by proton computed tomography
Open Access
- 14 January 2026
- journal article
- Published by IOP Publishing in Physics in Medicine & Biology
- Vol. 71 (1) , 015041
Abstract
Objective. Treatment planning in proton therapy requires an accurate estimation of stopping power ratio relative to water (SPR) maps. Presently, about 4% of patients submitted to radiotherapy treatments have metallic implants, which are responsible for an incorrect determination of SPRs in prostheses and surrounding regions. This study presents the first application of the proton computed tomography (pCT) technique, able to directly measure SPRs maps, on complex metallic implants. Approach. A homogeneous Ti6Al4V alloy sample, a set of metallic devices used for prostheses and an intra-vertebral titanium alloy implant have been inspected, by means of a prototype pCT system with a 5 × 20 cm 2 field-of-view (FoV) developed by INFN Firenze (Italy), under a proton beam at Trento Proton Therapy Centre (APSS, Trento, Italy). For comparison, a Multi Layer Ionization Chamber (MLIC) has been used to independently determine the SPR mean value of the Ti6Al4V alloy sample. Main Results. Tomographic reconstructions of all devices and materials have been performed and SPR maps have been obtained. All pCT images and profiles, even of metallic components, are characterized by negligible artifacts. The fine spatial resolution of our pCT system, about 0.7 lp mm −1 , allowed us to resolve details within a millimeter scale. The internal grid of the meshed cage as well as details of the screws’ head of the intra-vertebral titanium alloy implant are clearly visible. The SPR of the Ti6Al4V alloy sample measured with pCT, 3.14 ± 0.02, compares well with what was measured by MLIC: 3.17 ± 0.02. Significance. This study presents the first application of the pCT methodology to directly measure SPR maps of complex metal prostheses. The ability of pCT to correctly determine mean SPR values has been experimentally demonstrated. Furthermore, this technique was shown to reconstruct complex metal structures at the millimeter scale with negligible artifacts.Keywords
Funding Information
- Commissione Scientifica Nazionale 5, Istituto Nazionale di Fisica Nucleare pRAD experiment
This publication has 36 references indexed in Scilit:
- Proton Therapy for Spinal Tumors: A Consensus Statement From the Particle Therapy Cooperative GroupInternational Journal of Radiation Oncology - Biology - Physics (IJROBP), 2024
- Titanium-Based alloys and composites for orthopedic implants Applications: A comprehensive reviewMaterials & Design, 2024
- Advances in metal artifact reduction in CT images: A review of traditional and novel metal artifact reduction techniquesEuropean Journal of Radiology, 2023
- Management of metallic implants in radiotherapyCancer/Radiothérapie, 2022
- Dosimetric impact of commercial CT metal artifact reduction algorithms and a novel in‐house algorithm for proton therapy of head and neck cancerMedical Physics, 2020
- Metallic implants and CT artefacts in the CTV area: Where are we in 2020?Cancer/Radiothérapie, 2020
- Carbon fiber reinforced vs titanium implants for fixation in spinal metastases: A comparative clinical study about safety and effectiveness of the new “carbon-strategy”Journal of Clinical Neuroscience, 2020
- Evaluation of two commercial CT metal artifact reduction algorithms for use in proton radiotherapy treatment planning in the head and neck areaMedical Physics, 2018
- Long-Term Outcomes and Prognostic Factors After Pencil-Beam Scanning Proton Radiation Therapy for Spinal Chordomas: A Large, Single-Institution CohortInternational Journal of Radiation Oncology - Biology - Physics (IJROBP), 2018
- Water equivalent thickness of immobilization devices in proton therapy planning – Modelling at treatment planning and validation by measurements with a multi-layer ionization chamberPhysica Medica, 2017