Effects of Heat Treatment on Microstructure and Impact Resistance of High Manganese Steels
Open Access
- 15 November 2023
- journal article
- research article
- Published by Politeknik Dergisi in Journal of Polytechnic
- Vol. 27 (5) , 1
Abstract
High manganese steels are widely used as wear- and impact-resistant materials in many areas, especially in the mining, construction, cement, and metallurgy sectors, where it is extremely important to be able to work safely in high-stress conditions as well as resistance to abrasion under heavy loading conditions thanks to their unique work-hardening performance. At this point, the carbon and manganese ratio of the material has a considerable influence on the microstructure of the cast part after the heat treatment. Therefore, heat treatment conditions have to be determined appropriately depending on the chemical composition of the material. In this study, heat treatment processes were applied to high manganese steel specimens having GX120MnCr18-2 DIN standard at various austenitizing temperatures between 1030~1100 oC. The specimens were examined under an optical microscope and SEM/EDS analyses were performed. Impact resistance and hardness values of the above-mentioned specimens were measured via the tests performed with TS EN ISO 148-1 and TS EN 130 6508-1 standards, respectively. From these investigations, it was determined that the carbide solubility increased as the austenitizing temperature increased while the impact resistance first increased and then decreased.Keywords
This publication has 31 references indexed in Scilit:
- Influence of precooling and deformation temperature on microstructure and mechanical properties in a high-manganese austenitic steelMaterials Science and Engineering: A, 2014
- Impact of short-range ordering on yield strength of high manganese austenitic steelsMaterials Science and Engineering: A, 2014
- Enhanced mechanical properties in a high-manganese austenitic steel through formation of nano grains, nanotwinned austenite grains, nano carbides and TRIPMaterials Science and Engineering: A, 2014
- A novel high manganese austenitic steel with higher work hardening capacity and much lower impact deformation than Hadfield manganese steelMaterials & Design (1980-2015), 2014
- Dependence of Grain Size on Mechanical Properties and Microstructures of High Manganese Austenitic SteelProcedia Engineering, 2014
- On the role of slip–twin interactions on the impact behavior of high-manganese austenitic steelsMaterials Science and Engineering: A, 2013
- Tensile deformation behavior of high manganese austenitic steel: The role of grain sizeMaterials & Design (1980-2015), 2010
- Analysis of the microstructure evolution during tensile testing at room temperature of high-manganese austenitic steelMaterials Characterization, 2009
- Thermo-mechanical processing of high-manganese austenitic TWIP-type steelsArchives of Civil and Mechanical Engineering, 2008
- Deformation and fracture behaviour of high manganese austenitic steelJournal of Materials Processing Technology, 2004