Impact toughness improvement of high boron-chromium steel by different isothermal heat treatment durations
- 4 May 2023
- journal article
- research article
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 65 (7) , 1015-1024
Abstract
This research investigates the improvement of impact toughness by changing isothermal heat treatment time for an alloy having high boron/chromium constituents. Different boron contents (0.5–5.00 wt% B) were added into high chromium steel by sand casting. Along with JMatPro program, dilatometry used to calculate critical temperatures and transformation diagrams as well. After austenization at 1050 °C for an hour, at 390 °C high B/Cr alloys isothermally heat treated for three different time intervals (24, 96, and 168 h). According to experimental findings, isothermal heat treatment enhanced hardness and impact toughness of the alloys (excluding 3.10 and 4.75 wt% boron containing alloys) due to the elimination of microsegregations and lowering carboboride sharpness. However, for every alloy wear resistance was not affected by isothermal heat treatment because carbide/boride fraction controls wear properties of the high B/Cr alloys. According to scanning electron microscope microstructures, cleavage fracture, and plowing were observed in isothermally heat treated specimens. It is noted that, isothermal heat treatment time showed no effect in mechanical properties of the high B/Cr alloys because the large amount of alloying elements shifted the phase transformation curve longer times which was more than JMatPro estimations.Keywords
Funding Information
- Gazi University (07/2018-06)
This publication has 20 references indexed in Scilit:
- Solidification and phase formation of alloys in the hypoeutectic region of the Fe–C–B systemActa Materialia, 2015
- Effects of Chromium Addition on Microstructure and Abrasion Resistance of Fe–B Cast AlloyTribology Letters, 2011
- Research on Microstructure and Mechanical Properties of High Boron Cast SteelAdvanced Materials Research, 2011
- A Study on the Wear Behavior of Cast Boron SteelJournal of Materials Engineering and Performance, 2011
- Development of an Armor Steel for Ballistic ProtectionMaterials Testing, 2010
- Synthesis and consolidation of boron carbide: a reviewInternational Materials Reviews, 2010
- Uncertainties in dilatometric determination of martensite start temperatureMaterials Science and Technology, 2007
- Investigation of quenching effect on mechanical property and abrasive wear behaviour of high boron cast steelMaterials Science and Technology, 2007
- Effect of boron additions on the toughness of heat-treated low-alloy steelsJournal of Heat Treating, 1987
- Metallurgy of boron-treated low-alloy steelsMetals Technology, 1974