Computational study of reservoir sand production mechanisms
Authors:
Open Access
- 1 September 2019
- journal article
- research article
- Published by Emerald Publishing in Geotechnical Research
- Vol. 6 (3) , 177-204
Abstract
A numerical model is developed to simulate fluid flow conditions around a wellbore and to evaluate mechanisms governing fluid flow, pressure gradients, rock failure and the ensuing sand production. The rock material behaviour matches sandstone described by the Drucker–Prager material failure model. Conditions for erosion are governed through two criteria: a material failure criterion described by the Drucker–Prager model and a sanding criterion expressed by an eroded solid mass generation model. The interplay between controlling operating and reservoir conditions is assessed. In addition, contributions of the following key factors to interstitial fluid velocity, plastic strain, pore pressure variation and sand production are appraised: drawdown, wellbore perforation depth, mud pressure and erosion criteria. Despite a decrease in pore fluid velocity at the vicinity of the wellbore at increasing depth, sand production increases with wellbore/perforation depth. Likewise, at constant drawdown, sand production is aggravated as wellbore/perforation depth increases. The rate of increase in the plastic zone following the onset of sand production is inconstant. Furthermore, mud pressure is demonstrated as an effective tool for attenuating sand production. An understanding of interactions between key parameters governing reservoir responses and the effect on sanding during oil/gas production is imperative if extraction operations are to be optimised.Keywords
This publication has 51 references indexed in Scilit:
- Influence of rock failure behaviour on predictions in sand production problemsEnvironmental Earth Sciences, 2013
- Determination of mobilized strength properties of degrading sandstoneSoils and Foundations, 2012
- Mathematical Model for Estimating Perforation Penetration DepthPetroleum Science and Technology, 2008
- Competition of gravity, capillary and viscous forces during drainage in a two-dimensional porous medium, a pore scale studyEnergy, 2005
- Sand erosion with a porosity diffusion lawComputers and Geotechnics, 2005
- Deflection Criteria for Numerical Assessment of the Sand Production Potential in an Openhole CompletionEnergy Sources, 2002
- An erosion-mechanical model for sand production rate predictionInternational Journal of Rock Mechanics and Mining Sciences, 1998
- Hydro-mechanical aspects of the sand production problemTransport in Porous Media, 1996
- Experimental study of sand production from perforation cavitiesInternational Journal of Rock Mechanics and Mining Sciences, 1994
- Numerical treatment of progressive localization in relation to borehole stabilityInternational Journal for Numerical and Analytical Methods in Geomechanics, 1992