Microstructure, Plasticity and Ductility of a TNM+ Alloy Densified by Spark Plasma Sintering
Authors:
- Michael MusiMMMichael Musi
- Christophe DeshayesCDChristophe Deshayes
- Guy MolénatGMGuy Molénat
- Louise ToualbiLTLouise Toualbi
- Benjamin GalyBGBenjamin Galy
- Petra Spoerk-ErdelyPSPetra Spoerk-Erdely
- Muriel HantcherliMHMuriel Hantcherli
- Jean-Philippe MonchouxJMJean-Philippe Monchoux
- Marc ThomasMTMarc Thomas
- Helmut ClemensHCHelmut Clemens
- Alain CouretACAlain Couret
Open Access
Abstract
This work presents a study of the microstructure and mechanical properties of a TNM+ alloy (Ti-43.5Al-4Nb-1Mo-0.1B-0.3C-0.3Si, in at.%) densified by Spark Plasma Sintering (SPS), in comparison to the as-SPSed TNM alloy, which contains neither carbon nor silicon. Tensile tests at room temperature and 800 °C, as well as creep tests at 800 °C and 200 MPa, were performed. The microstructures and the fracture surfaces of deformed samples were studied by scanning and transmission electron microscopies, as well as by X-ray diffraction. The deformation mechanisms were investigated by means of in situ straining experiments and post-mortem analyses of deformed samples, both performed by transmission electron microscopy. Contrary to the TNM alloy, the as-SPSed microstructure of the TNM+ alloy does not contain β/βo phase due to the incorporation of carbon. At room temperature, the TNM+ alloy exhibits a yield stress of 520 MPa but a poor ductility of less than 0.1% of plastic strain. The incorporation of carbon and silicon leads to an increase in the creep resistance of the alloy at 800 °C. Despite the fact that iron inclusions are responsible for the premature failure of some samples during tensile tests, the TNM+ alloy is found to be able to deform plastically at room temperature by the glide of ordinary dislocations and by twinning.Keywords
Funding Information
- Agence Nationale de la Recherche (ANR) (Hi-TiAl-18-CE91-0008-01)
- Fonds zur Förderung der wissenschaftlichen Forschung (FWF) (Hi-TiAl-18-CE91-0008-01)
This publication has 43 references indexed in Scilit:
- Identification of microstructural mechanisms during densification of a TiAl alloy by spark plasma sinteringJournal of Alloys and Compounds, 2011
- Design of Novel β‐Solidifying TiAl Alloys with Adjustable β/B2‐Phase Fraction and Excellent Hot‐WorkabilityAdvanced Engineering Materials, 2008
- Recrystallization and phase transitions in a γ-TiAl-based alloy as observed by ex situ and in situ high-energy X-ray diffractionActa Materialia, 2006
- Phase transformations in TiAl based alloysActa Materialia, 2005
- Anin-situstudy of ordinary dislocation glide in γ-TiAl alloysPhilosophical Magazine A, 1999
- The compression behaviour of niobium alloyed γ-titanium alumindiesActa Materialia, 1998
- A QUANTITATIVE TEM ANALYSIS OF THE LAMELLAR MICROSTRUCTURE IN TiAl BASED ALLOYSActa Materialia, 1997
- Silicide precipitation strengthened TiAlMaterials Science and Engineering: A, 1995
- Anin situstudy of twin propagation in TiAlPhilosophical Magazine A, 1993
- Room-temperature tensile deformation of polysynthetically twinned (PST) crystals of TiAlActa Metallurgica et Materialia, 1992