Stability assessment of a new high strength, high temperature Type R and Type S thermocouple
- 27 September 2019
- journal article
- research article
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 31 (4) , 044005
Abstract
Platinum-rhodium Type R and S thermocouples fail in service because of two main reasons: excessive grain growth in the platinum limb at high temperatures (causing wire breakage) and temperature drift, i.e. deviation of electromotive force (emf) generated over time because of deposition of rhodium oxide on the platinum limb, out of accepted industry tolerances. Finding a solution to the problem is challenging because of the contradictory requirements of strength and narrow permissible emf range: emf is extremely sensitive to any dopants or alloying elements that can be used to improve strength at high temperatures. Johnson Matthey has developed a new thermocouple wire (platinum limb) called 'HTX™' by doping platinum with a small quantity of zirconium which is oxidised during processing to electrically neutral zirconium oxide. Zirconium oxide improves the high temperature strength of platinum wire by restricting the grain growth but does not significantly affect the emf. The result is a wire which has the potential to last many times longer at high temperatures (>1200 °C) than standard platinum wire, whilst still achieving Class 1 tolerance (i.e. ± 1 °C at 1000 °C). It also improves the thermoelectric drift characteristics of the thermocouple by counteracting any reduction in emf due to rhodium contamination by an increase in emf as any remaining zirconium is converted to zirconium oxide. We describe an impartial long-term assessment (up to 1500 hours) of the thermoelectric stability of the HTX™ wire by exposure to high temperature with periodic in-situ calibration using a Co-C (1324 °C) high temperature fixed point. This yields stability measurements with very high precision.Keywords
This publication has 34 references indexed in Scilit:
- On the mechanism of internal oxidation in platinum–zirconium alloysJournal of Alloys and Compounds, 2007
- Fast Internal Oxidation of Ni–Zr–Y Alloys at Low Oxygen PressureOxidation of Metals, 2004
- A critique of internal oxidation in alloys during the post-wagner eraOxidation of Metals, 1995
- Oxygen generated platinum, rhodium and palladium volatile losses from pure metals and their alloysJournal of the Less Common Metals, 1986
- Changes in seebeck coefficient of Pt and Pt 10% Rh after use to 1700 C in High-purity polycrystalline aluminaInternational Journal of Thermophysics, 1985
- Dispersion strengthening austenitic stainless steels by nitridingMetallurgical Transactions, 1970
- Über die innere Oxydation von MetallegierungenActa Metallurgica, 1964
- Oxidation of the platinum-group metalsJournal of the Less Common Metals, 1963
- Thermoelectric Instability of Some Noble Metal Thermocouples at High TemperaturesReview of Scientific Instruments, 1962
- Thermodynamics of the gaseous oxides of the platinum-group metalsProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1960