Wind-Induced Response of Coupled Shear Wall Systems Based on Wind Tunnel Testing
Open Access
- 13 July 2026
- journal article
- research article
- Published by MDPI AG in Infrastructures
- Vol. 11 (7) , 236
Abstract
Coupled shear wall systems are widely used in tall buildings due to their high lateral stiffness and effectiveness in controlling wind-induced serviceability responses. Reliable assessment of their behavior under realistic wind loading requires accurate load representation and properly calibrated numerical modeling. This study investigates the performance of coupled shear wall systems under wind loads derived from wind tunnel testing, where surface pressure time histories were extracted from the TPU Aerodynamic Database and used to generate equivalent full-scale, time-varying wind loads. The preliminary design of a 20-story building was established in ETABS based on current design codes. Detailed nonlinear time-history analyses were subsequently performed in OpenSees to assess the performance under three different wind hazards for the original and refined design, where shear walls were modeled using the Multiple-Vertical-Line-Element Model (MVLEM). Several wind demand indicators, including drift ratios, floor accelerations, and component and cladding performance were evaluated. The results demonstrate that the performance-based design framework enables the identification of critical vulnerabilities that may not be fully captured by conventional code-based drift and strength checks, particularly regarding localized damage accumulation and serviceability-related demands. Additionally, the refined configuration, while requiring only a 4.33% increase in total baseline concrete volume, effectively reduced peak roof drift by 60%, allowing reliable control of dynamic behavior and prevention of structural yielding, as well as ensuring the maintenance of both structural integrity and operational serviceability for the investigated high-rise configuration during severe wind events. Nevertheless, the findings are limited to the investigated building configuration and aerodynamic conditions considered in this study.Keywords
This publication has 21 references indexed in Scilit:
- Draft ISO standard for simplified performance-based wind design of tall concrete buildingsAdvances in Wind Engineering, 2026
- Performance-based layout optimization framework of tall buildings subjected to dynamic wind loadEngineering Structures, 2025
- Performance evaluation of high-rise buildings using database-assisted design approachStructural Safety, 2024
- Performance-based wind and earthquake design framework for tall steel buildings with ductile detailingJournal of Wind Engineering and Industrial Aerodynamics, 2023
- Performance-based wind design for tall buildings: Review and comparative studyJournal of Building Engineering, 2023
- Nonlinear dynamic response analysis of buildings for wind loads. A new frontier in the structural wind engineeringJournal of Building Engineering, 2022
- Assessment of dynamic behavior and seismic performance of a high-rise rc coupled wall buildingEngineering Structures, 2018
- Examination of experimental variability in HFFB testing of a tall building under multi-directional windsJournal of Wind Engineering and Industrial Aerodynamics, 2017
- Wind-induced motion on tall buildings: A comfort criteria overviewJournal of Wind Engineering and Industrial Aerodynamics, 2015
- Performance based design extreme wind loads on a tall buildingThe Structural Design of Tall Buildings, 2001