Adaptive Noise Reduction Method of Synchronous Hydraulic Motor Acoustic Signal Based on Improved Dislocation Superposition Method
Open Access
- 21 February 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 37161-37172
Abstract
Acoustic signal contains information on the state of mechanical motion, but the disadvantage of low signal-to-noise ratio (SNR) is that acoustic signal without noise reduction is difficult to apply to fault diagnosis directly. This study proposes an adaptive noise reduction method based on the dislocation superposition method (DSM), which can realize automatic noise reduction for acoustic signals of low SNR synchronous hydraulic motors. First, the theoretical rotation period of the synchronous hydraulic motor is obtained according to the flow meter. Then, the actual signal is subjected to DSM processing according to the measurement accuracy of the flow meter and the theoretical rotation period to adjust the exact superposition length and the initial position of the actual signal. Finally, when the stop condition is not satisfied, the number of superposition is increased and the above process is repeated. The superimposed signal satisfying the stop condition is taken as the noise reduction signal. According to experimental results, the proposed method has good noise reduction effect on the acoustic signals of the synchronous hydraulic motor health state, wear out state of gear and end cover, and rust state of the gear. The noise reduction signal has been verified to have higher accuracy than the actual signal. Therefore, the proposed automatic noise reduction method can be applied to the noise reduction processing of other kinds of rotating mechanical acoustic signals.Keywords
Funding Information
- National Basic Research Program of China (2018YFC0810404, 2018YFC0810406)
- Fundamental Research Funds for the Central Universities (3132019118)
- State Key Laboratory of Fluid Power and Mechatronic Systems (GZKF-201810)
This publication has 25 references indexed in Scilit:
- Cavitation pulse extraction and centrifugal pump analysisJournal of Mechanical Science and Technology, 2017
- Adaptive parameterless empirical wavelet transform based time-frequency analysis method and its application to rotor rubbing fault diagnosisSignal Processing, 2017
- Wavelet Packet Envelope Manifold for Fault Diagnosis of Rolling Element BearingsIEEE Transactions on Instrumentation and Measurement, 2016
- A New Wavelet Denoising Method for Selecting Decomposition Levels and Noise ThresholdsIEEE Access, 2016
- Extraction of fault component from abnormal sound in diesel engines using acoustic signalsMechanical Systems and Signal Processing, 2016
- Dense framelets with two generators and their application in mechanical fault diagnosisMechanical Systems and Signal Processing, 2013
- A joint resonance frequency estimation and in-band noise reduction method for enhancing the detectability of bearing fault signalsMechanical Systems and Signal Processing, 2008
- On the Importance of the Pearson Correlation Coefficient in Noise ReductionIEEE Transactions on Audio, Speech, and Language Processing, 2008
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 1998
- Francis Galton's Account of the Invention of CorrelationStatistical Science, 1989