Influence of spindle tip geometry on the performance of a controllable CO 2 ejector
- 4 September 2025
- journal article
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics C
- Vol. 37 (10)
Abstract
Variable geometry ejectors are crucial in CO 2 refrigeration systems for the recovery of expansion work and in the regulation of refrigerating capacity. The performance of a variable geometry ejector is sensitive to the spindle geometry and its positioning. This study employs numerical analysis to explore how the spindle tip angle affects the performance and flow behavior of a variable geometry CO 2 ejector. The study analyzes the flow characteristics of the ejector for various angles of the spindle tip, considering both critical and sub-critical operating modes. An increase in the spindle tip angle lowers the motive flow rate, for a fixed spindle position. A sharper tip for the spindle reduces secondary flow entrainment in the critical operating mode and improves the secondary flow rate in the subcritical operating mode. Vapor quality from the ejector improves for a larger tip angle in the critical mode, and the opposite trend is observed for the subcritical mode. For spindle tip angles larger than the convergent angle of the motive nozzle, the pre-expanding motive flow before the nozzle throat plane in critical mode lowers the pressure in the mixing region and amplifies secondary flow entrainment. As the spindle tip angle increases in the subcritical mode, the rise in flow obstruction from recirculating flows leads to a significant decrease in secondary flow entrainment. The critical and the maximum functional discharge pressures decrease with an increase in the spindle tip angle. However, even when the ejector operates in subcritical mode, larger spindle tip angles can achieve higher entrainment ratios compared to narrower spindle tips for a given pressure lift.Keywords
This publication has 26 references indexed in Scilit:
- Two-phase flow visualisation in the R744 vapour ejector for refrigeration systemsApplied Thermal Engineering, 2022
- Numerical investigation on the performance of transcritical CO2 two-phase ejector with a novel non-equilibrium CFD modelEnergy, 2022
- Performance evaluation of CO2 supermarket refrigeration system with multi-ejector and dedicated mechanical subcoolingEnergy Reports, 2021
- A novel CFD approach for the computation of R744 flashing nozzles in compressible and metastable conditionsEnergy, 2018
- Comprehensive experimental performance analyses of an ejector expansion transcritical CO 2 systemApplied Thermal Engineering, 2016
- CFD-based shape optimisation of a CO 2 two-phase ejector mixing sectionApplied Thermal Engineering, 2016
- A computational model of a transcritical R744 ejector based on a homogeneous real fluid approachApplied Mathematical Modelling, 2013
- Numerical modeling of two-phase supersonic ejectors for work-recovery applicationsInternational Journal of Heat and Mass Transfer, 2012
- Investigation on performance of variable geometry ejectors for CO 2 refrigeration cyclesEnergy, 2012
- Supersonic two-phase flow of CO2 through converging–diverging nozzles for the ejector refrigeration cycleInternational Journal of Refrigeration, 2009