JRJishnu Chandran Ramachandran

Jishnu Chandran Ramachandran

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jishnu Chandran Ramachandran has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Influence of spindle tip geometry on the performance of a controllable CO 2 ejector

    by Jishnu Chandran R., Sreeja Sadasivan, Senthil Kumar Arumugam

    Variable geometry ejectors are crucial in CO 2 refrigeration systems for the recovery of expansion work and in the regulation of refrigerating capacity. The performance of a variable geometry ejector is sensitive to the spindle geometry and its positioning. This study employs numerical analysis to explore how the spindle tip angle affects the performance and flow behavior of a variable geometry CO 2 ejector. The study analyzes the flow characteristics of the ejector for various angles of the spindle tip, considering both critical and sub-critical operating modes. An increase in the spindle tip angle lowers the motive flow rate, for a fixed spindle position. A sharper tip for the spindle reduces secondary flow entrainment in the critical operating mode and improves the secondary flow rate in the subcritical operating mode. Vapor quality from the ejector improves for a larger tip angle in the critical mode, and the opposite trend is observed for the subcritical mode. For spindle tip angles larger than the convergent angle of the motive nozzle, the pre-expanding motive flow before the nozzle throat plane in critical mode lowers the pressure in the mixing region and amplifies secondary flow entrainment. As the spindle tip angle increases in the subcritical mode, the rise in flow obstruction from recirculating flows leads to a significant decrease in secondary flow entrainment. The critical and the maximum functional discharge pressures decrease with an increase in the spindle tip angle. However, even when the ejector operates in subcritical mode, larger spindle tip angles can achieve higher entrainment ratios compared to narrower spindle tips for a given pressure lift.

  • Open Access

    Leveraging Physics-Informed Neural Networks for Noise Reduction in Fluid Flow Data

    by Jishnu Chandran, Ishwariya R, Jisha C R, Ashish Garg, Arun Govind Neelan

    Noise removal from sensor data remains a significant challenge in experimental studies. Traditional approaches such as filters and smoothers are widely used but often lack a physics-based foundation. These methods typically require domain expertise and extensive trial-and-error tuning, and their effectiveness diminishes with increasing noise levels—frequently resulting in distortion of the original signal or derived quantities. Physics-Informed Neural Networks (PINNs) offer a promising alternative by embedding physical laws and governing equations directly into the learning process. In this study, we evaluate the potential of PINNs for noise removal in transport equations and compare their performance with conventional numerical methods, both with and without filtering. Our analysis focuses on synthetically generated subsonic and supersonic flow data from numerical simulations. Results demonstrate that PINNs can successfully reconstruct pressure fields from noisy velocity data, outperforming traditional methods, especially in high Reynolds number scenarios. Conventional approaches struggle to denoise velocity fields in supersonic flows and often yield nonphysical pressure distributions. To address this, we introduce an adaptive-weight and adaptive-viscosity PINN framework that enables robust pressure reconstruction in supersonic regimes. These findings underscore the superior capability of physics-informed models in handling noise, particularly in compressible flows with shocks, where traditional filters fail. This study highlights that physics-based filtering may be essential for accurate reconstruction in shock-dominated problems.

  • Open Access

    Advances in the Physics and Computation of Compressible Liquid Transients

    by Jishnu Chandran, Ashish Garg, Arun Govind Neelan, Risha Raju

    Accurate modeling of compressible liquid transients requires robust modeling of compressibility effects in a liquid, such as density variations and acoustic velocities. Efficient and case-adaptive friction models are crucial for the simulation accuracy of liquid transients. The paper reviews different mathematical models and their numerical implementation for compressible liquid transient simulations. Different aspects of compressible liquid transient modeling and simulation are profoundly explored with the help of relevant literature. The major aspects reviewed are the high-pressure applications of liquids, compressible modeling of liquids, gas shock tube simulation and its extension to liquid shock cases, the importance of numerical techniques such as Riemann solvers in simulation, the need for the development of benchmark results in compressible liquid flows, the evolution of unsteady friction modeling and limitations of models, and scope for improvement of valve-induced surge modeling. Almost every application where liquid compressibility effects are significant is covered under this review. A range of liquid equations of state for different liquids are discussed, and the compressible modeling of liquid water is profoundly analyzed by evaluating the performance of different state equations for the fluid. The significance of the gas shock tube problem in the branch of compressible flows is discussed, and the ways in which it could be extended to compressible liquid shock cases are elaborated through the conceptual problem of the water shock tube. The numerical techniques, especially the Riemann solvers, and the evolution of their different variants are explained with the help of relevant literature. Different formulations for steady and unsteady friction that are generally employed in mathematical models are analyzed, and their limitations for complex transient cases are discussed. Recent advancements in the unsteady friction formulation, such as the variable damping technique, are discussed, and its application to surge modeling is demonstrated. The experimental and numerical studies on valve-induced surges, their mathematical modeling, and the flow characteristics at the upstream and downstream locations of the valve are discussed in detail with the help of published literature. This review can serve as a single sufficient source for understanding the different aspects of compressible liquid transient modeling and to know the state-of-the-art in each aspect. The review also suggests the major directions in which future study is required based on the existing models' limitations and gaps in the literature.

  • Two-phase radial ejector for transcritical CO2 refrigeration

    by Jishnu Chandran Ramachandran, Sreeja Sadasivan, Senthil Kumar Arumugam, Fei Chen

    Transcritical refrigeration systems using natural refrigerants like CO2 operate on the ejector–expansion cycle to achieve high operating efficiency. The variability of ejector geometry dictates the adjustability of refrigerating capacity in such systems. Traditional spindle-controlled axial-flow ejectors significantly obstruct the high-pressure motive flow to regulate mass flow rate by controlling flow area. This study introduces the first radial-flow ejector geometry for transcritical CO2 refrigeration systems, designed to operate at high mass flow rates and entrainment ratios with minimal obstruction to motive flow. The study numerically investigates the performance of a radial-flow two-phase ejector for CO2, comparing it with an axial-flow ejector of similar dimensions under the same conditions. It explores the impact of applied compression ratio, motive nozzle throat spacing, and other geometries on radial ejector performance. An increase in the motive throat spacing improves the range of operable discharge pressures and achievable compression ratios, with a slight reduction in the secondary flow entrainment. A nozzle throat spacing of 0.6 mm allows a wider range of operable discharge pressures, and beyond this, the operable discharge pressure range drops. The addition of a diffuser section of sufficient length also improves the flow entrainment in the radial ejector. The radial ejector allows substantially high mass flow rates of even 15 times that of the axial ejector. This high mass flow capacity in the radial configuration can significantly compact ejector designs for large-capacity transcritical CO2 refrigeration and air-conditioning systems.


  • Investigation of burnout effect in turbine blade tip leakage at transonic conditions: a numerical study

    by Vignesh Boopalan, Jishnu Chandran R, Senthil Kumar Arumugam, Rajesh Kanna P

    In the aviation industry, turbine blade tip leakage significantly impacts the economy due to aerodynamic losses in the turbine. The tip leakage flow increases when the tip surface is exposed to high heat loads from the burnout effect, contributing to nearly 30% of the total loss in the turbine stage. This study numerically investigates two-dimensional flat tip and burnt-out tip models under different flow accelerations at transonic conditions. Variations in the discharge coefficient are examined for different pressure ratios across the tip gap. Flow and shockwave patterns for various blade tip geometries are obtained and analyzed. The burnt-out tip notably increases tip leakage, and a significant decrease in turbine efficiency is observed beyond a critical burnout limit. The quantified losses at different stages of blade tip burnout are used to predict the effective operational life of the blade. A correlation is developed to relate the non-dimensional tip-leakage flow parameters to the normalized blade-tip geometry.

  • Open Access

    Recent Developments in Supercritical CO2-Based Sustainable Power Generation Technologies

    by Saravana Kumar Tamilarasan, Jobel Jose, Vignesh Boopalan, Fei Chen, Senthil Kumar Arumugam, Jishnu Chandran Ramachandran, Rajesh Kanna Parthasarathy, Dawid Taler, Tomasz Sobota, Jan Taler

    Global warming and environmental pollution from greenhouse gas emissions are hitting an all-time high consistently year after year. In 2022, energy-related emissions accounted for 87% of the overall global emissions. The fossil fuel-based conventional power systems also need timely upgrades to improve their cycle efficiency and reduce their impact on the environment. Supercritical CO2 systems and cycles are gaining attention because of their higher efficiencies and their compatibility with varied energy sources. The present work is a detailed overview of the recent developments in supercritical CO2-based power generation technologies. The supercritical CO2-based Brayton and Rankine power cycles and their improvisations in industrial applications are also discussed in detail. The advances in heat exchanger technology for supercritical CO2 systems are another focus of the study. The energy, exergy, and economical (3E) analysis is carried out on various supercritical CO2 power cycles reported in the literature and the data are concisely and intuitively presented. The review concludes by listing the identified directions for future technology development and areas of immediate research interest. A roadmap is proposed for easing the commercialization of supercritical CO2 technologies to immediately address the growing challenges and concerns arising from energy-related emissions.


  • Two-phase simulation of transcritical CO$_2$ flow in nozzle and ejector using the homogeneous equilibrium model

    by R. Jishnu Chandran, Senthil Kumar Arumugam, Sreeja Sadasivan, P. Rajesh Kanna, Fei Chen


  • Accurate Compressible Flow Modelling of Liquid Shock Tube Problems

    by R. Jishnu Chandran, Risha Raju, A. Salih, Senthil Kumar Arumugam