Proton-conducting ceramics for water electrolysis and hydrogen production at elevated pressure
Open Access
- 6 October 2022
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 10
Abstract
Pressurized operation is advantageous for many electrolysis and electrosynthesis technologies. The effects of pressure have been studied extensively in conventional oxygen-ion conducting solid-oxide electrochemical cells. In constrast, very few studies have examined pressurized operation in proton-conducting electroceramics. Protonic ceramics offer high proton conductivity at intermediate temperatures (∼400–600°C) that are well-matched to many important thermochemical synthesis processes. Pressurized operation can bring significant additional benefits and/or provide access to synthetic pathways otherwise unavailable or thermodynamically disfavorable under ambient conditions and in higher- or lower-temperature electrochemical devices. Here we examine pressurized steam electrolysis in protonic-ceramic unit-cell stacks based on a BaCe0.4Zr0.4Y0.1Yb0.1O3−δ (BCZYYb4411) electrolyte, a Ni–BZCYYb4411 composite negatrode (fuel electrode) and a BaCo0.4Fe0.4Zr0.1Y0.1O3−δ (BCFZY) positrode (air-steam electrode). The cells are packaged within unit-cell stacks, including metallic interconnects, current collectors, sealing glasses and gaskets sealed by mechanical compression. The assembly is packaged within a stainless steel vessel for performance characterization at elevated pressure. Protonic-ceramic electrolyzer performance is analyzed at 550°C and pressures up to 12 bara. Increasing the operating pressure from 2.1 to 12.6 bara enables a 40% overall decrease in the over-potential required to drive electrolysis at 500 mA cm−2, with a 33% decrease in the cell ohmic resistance and a 60% decrease in the cell polarization resistance. Faradaic efficiency is also found to increase with operating pressure. These performance improvements are attributed to faster electrode kinetics, improved gas transport, and beneficial changes to the defect equilibria in the protonic-ceramic electrolyte, which more than compensate for the slight increase in Nernst potential brought by pressurized operation. Electrochemical impedance spectroscopy (EIS) coupled with distribution of relaxation time (DRT) analysis provides greater insight into the fundamental processes altered by pressurized operation.Keywords
This publication has 40 references indexed in Scilit:
- Experimental Investigation of the Effect of Operating Pressure on the Performance of SOFC and SOECECS Transactions, 2013
- Effect of pressure variation on power density and efficiency of solid oxide fuel cellsElectrochimica Acta, 2012
- Composite Oxygen Electrode Based on LSCM for Steam Electrolysis in a Proton Conducting Solid Oxide ElectrolyzerJournal of the Electrochemical Society, 2012
- Influence of Pressurisation on SOFC Performance and Durability: A Theoretical StudyFuel Cells, 2011
- Hydrogen and synthetic fuel production using pressurized solid oxide electrolysis cellsInternational Journal of Hydrogen Energy, 2010
- Theoretical model and experimental analysis of a high pressure PEM water electrolyser for hydrogen productionInternational Journal of Hydrogen Energy, 2009
- Parametric study of solid oxide steam electrolyzer for hydrogen productionInternational Journal of Hydrogen Energy, 2007
- A Method to Separate Process Contributions in Impedance Spectra by Variation of Test ConditionsJournal of the Electrochemical Society, 2007
- Prediction of Production Power for High-pressure Hydrogen by High-pressure Water ElectrolysisIEEJ Transactions on Power and Energy, 2004
- Proton Conductivity: Materials and ApplicationsChemistry of Materials, 1996