Quench Protection of a Nb$_3$Sn Superconducting Magnet System for a 45-GHz ECR Ion Source
Open Access
- 15 January 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 28 (3) , 1-6
Abstract
Lawrence Berkeley National Laboratory in collaboration with the Institute of Modern Physics has developed a Nb 3 Sn-based superconducting magnet system for a fourthgeneration electron cyclotron resonance source, with a goal of achieving the magnetic field required for operating at the microwave frequency of 45 GHz. The magnet system is composed of one sextupole magnet inside three solenoids of different sizes manufactured from Nb 3 Sn round wire. Given the high stored energy density and relatively low wire copper fraction, the coils are not self-protected in the case of a quench. The study of the transient following a quench is carried out by means of the lumped-element dynamic electro-thermal program, which includes a detailed simulation of the interfilament coupling losses developing in the wire. Nonlinear effects occurring in the magnet, such as coupling loss and differential inductance reduction, have a significant impact on protecting these magnets. The resulting baseline quench protection strategy based on four independent energy extraction systems protecting the four magnets meets the quench protection requirements. Furthermore, in order to enhance the redundancy of the quench protection system and reduce the peak voltages to ground, the implementation of a coupling-loss induced quench (CLIQ) system is considered.Keywords
Funding Information
- U.S. Department of Energy
- US LHC Accelerator Research Program
- NSFC (11427904)
This publication has 9 references indexed in Scilit:
- Modeling of Interfilament Coupling Currents and Their Effect on Magnet Quench ProtectionIEEE Transactions on Applied Superconductivity, 2016
- Lumped-Element Dynamic Electro-Thermal model of a superconducting magnetCryogenics, 2016
- First Implementation of the CLIQ Quench Protection System on a Full-Scale Accelerator Quadrupole MagnetIEEE Transactions on Applied Superconductivity, 2016
- First Implementation of the CLIQ Quench Protection System on a 14-m-Long Full-Scale LHC Dipole MagnetIEEE Transactions on Applied Superconductivity, 2016
- Towards an Optimized Coupling-loss Induced Quench Protection System (CLIQ) for Quadrupole MagnetsPhysics Procedia, 2015
- Protecting a Full-Scale $\hbox{Nb}_{3}\hbox{Sn}$ Magnet With CLIQ, the New Coupling-Loss-Induced Quench SystemIEEE Transactions on Applied Superconductivity, 2014
- First experience with the new Coupling Loss Induced Quench systemCryogenics, 2014
- New, Coupling Loss Induced, Quench Protection System for Superconducting Accelerator MagnetsIEEE Transactions on Applied Superconductivity, 2013
- Magnet system for an ECR ion sourceIEEE Transactions on Applied Superconductivity, 2000