Refining of used engine oil by solvent extraction and adsorption processes: A circular economy strategy
Open Access
- 1 January 2025
- journal article
- Published by CSIR-National Institute of Science Communication and Policy Research (NIScPR) in Indian Journal of Chemical Technology
- Vol. 32 (6) , 755-765
Abstract
To address the issues related to lubricating oil used in vehicles, present study is aimed to investigate the characterization of waste engine oil and its treatment using solvent extraction and adsorption methods. The motor oil sample used has been treated with different solvents and solvent ratios to analyze the effect of solvent type and oil-solvent ratio on sludge removal, density, and ash content. The results showed that methanol-based treatment at a 1:3 oil-solvent ratio gave the best-refined oil, with a maximum sludge removal of 54% and a significantly lower density (0.874 g/ml) and ash content (0.54%). Additionally, the study employed adsorption as a further purification method, and the results indicated that an adsorbent dosage of 2.5 g per 50 ml of solvent-extracted oil at a temperature of 60°C gave the best-refined oil, with a 99% removal of metals as contaminants. The waste and treated engine oil have been characterized using various parameters, including density, viscosity, flash point, ash content, water content, and metal contents. The results indicated that the treated oil had comparable quality to the virgin oil, with a density of 0.871 g/mL, flash point of 210 °C, and ash content of <0.1%. The study's findings suggest that the solvent extraction and adsorption methods can be effective in removing contaminants from used engine oil, producing a refined oil of comparable quality to virgin oil. This study significantly impacts Ethiopia's environmental pollution reduction and energy conservation.Keywords
This publication has 18 references indexed in Scilit:
- Treatment of spent engine oil (spent SAE W50) via solvent extraction- adsorption process for the production of transfer oil: Physico-chemical properties of the adsorbentsScientific African, 2023
- Analyzing key drivers for a sustainable waste management system in Ethiopia: An interpretive structural modeling approachEnvironmental Challenges, 2022
- Re‐refining Used Engine Oil in Ghana Using Solvent Extraction and Acid‐Clay TreatmentInternational Journal of Chemical Engineering, 2022
- Pyrolysis of waste lubricating oil/waste motor oil to generate high-grade fuel oil: A comprehensive reviewRenewable and Sustainable Energy Reviews, 2021
- Properties of waste-distilled engine oil and biodiesel ternary blendsHeliyon, 2021
- Extensive thermogravimetric and thermo-kinetic study of waste motor oil based on iso-conversional methodsEnergy Conversion and Management, 2020
- Management of waste lubricant oil in Europe: A circular economy approachCritical Reviews in Environmental Science and Technology, 2020
- Recycling of used motor oil as an alternative method for production feedstock for the conversion processesPetroleum Science and Technology, 2018
- Low viscosity engine oils: Study of wear effects and oil key parameters in a heavy duty engine fleet testTribology International, 2016
- Quality characteristics improvement of low‐phenylalanine toast breadInternational Journal of Food Science and Technology, 2010