Dawit Tessema Ebissa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Dawit Tessema Ebissa has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Eshetu Getahun
Bahir Dar Energy Center, Bahir Dar Institute of Technology, Bahir Dar University, Bahir Dar, Ethiopia
5 shared publications Tamrat Tesfaye
Ethiopian Institute of Textile and Fashion Technology (EiTEX), Bahir Dar University, Bahir Dar, Ethiopia
5 shared publicationsDavid Wood
Department of Mechanical and Manufacturing Engineering, University of Calgary, 2500 University Dr. NW, Calgary T2N 1N4, Canada
3 shared publicationsDelele Worku
Bahir Dar Energy Center, Bahir Dar Technology Institute, Bahir Dar University, Bahir Dar, Ethiopia
3 shared publicationsEshetu Getahun
Bahir Dar Energy Center, Bahir Dar Institute of Technology Bahir Dar University Bahir Dar Ethiopia
3 shared publicationsAmbelu Meselu Mekonnen
1 shared publication
Latest Publications
- 13 May 2026
- Published by Taylor & Francis in Journal of Wood Chemistry and Technology
- p. 1-16
Bioethanol from water hyacinth through coupled microwave-alkaline pretreatment method: fermentation optimization
Water hyacinth (Eichhornia crassipes) is a prolific lignocellulose material native to Brazil and Ecuador that has become widespread across tropical and subtropical regions worldwide, including Asia...
- 13 May 2026
- Published by Taylor & Francis in Journal of Wood Chemistry and Technology
- p. 1-16
Bioethanol from water hyacinth through coupled microwave-alkaline pretreatment method: fermentation optimization
Water hyacinth (Eichhornia crassipes) is a prolific lignocellulose material native to Brazil and Ecuador that has become widespread across tropical and subtropical regions worldwide, including Asia...
- Open Access
- 27 May 2025
- Published by Wiley in Energy Science & Engineering
Experimental Investigation and Characterization of Biodiesel From Aregmone ocheroleuca
The experimental investigation and characterization of biodiesel from Argemone ochroleuca involves extracting oil from plant seeds through processes such as solvent extraction or mechanical pressing. Following extraction, transesterification is performed to convert the oil into biodiesel, typically using an alcohol (like methanol) and a catalyst (such as sodium hydroxide or potassium hydroxide). The produced biodiesel can be characterized by analyzing properties such as viscosity, density, flash point, acid value, and cetane number, often employing techniques like gas chromatography and spectroscopy to evaluate composition and purity. Such studies are essential to determine the feasibility of utilizing Argemone ochroleuca as a sustainable biodiesel production feedstock and assess its performance compared to conventional fuels. This study discusses On the experimental investigation and characterization of biodiesel derived from Aregmone ochroleuca, a plant known for its oil‐rich seeds and also the production of biodiesel from argemone oil, methanol, and potassium hydroxide catalysis through transesterification methods. The experimental run on argemone seed oil, focusing on the effect of particle size on oil extraction yield and physicochemical properties of crude oil. The oil was pretreated with sulfuric acid to reduce its acid value. The physicochemical properties of biodiesel were compared with ASTM and EU standards, and it was found that a good correlation between experimental results and biodiesel standards was expected. The maximum seed oil yield of Argemone ochroleuca was obtained by Soxhlet extraction from a smaller particle size of ripe seeds, yielding 38.05%. The oil's yellowish color and slightly transparent liquid with a refreshing and pleasant odor indicate its freshness and flavor quality. Including acid value, free fatty acid, saponification value, specific gravity, density, kinetics viscosity, and ash content, the physicochemical properties of the oil were determined.
- 27 May 2025
- Published by Wiley in Energy Science & Engineering
Open AccessExperimental Investigation and Characterization of Biodiesel From Aregmone ocheroleuca
The experimental investigation and characterization of biodiesel from Argemone ochroleuca involves extracting oil from plant seeds through processes such as solvent extraction or mechanical pressing. Following extraction, transesterification is performed to convert the oil into biodiesel, typically using an alcohol (like methanol) and a catalyst (such as sodium hydroxide or potassium hydroxide). The produced biodiesel can be characterized by analyzing properties such as viscosity, density, flash point, acid value, and cetane number, often employing techniques like gas chromatography and spectroscopy to evaluate composition and purity. Such studies are essential to determine the feasibility of utilizing Argemone ochroleuca as a sustainable biodiesel production feedstock and assess its performance compared to conventional fuels. This study discusses On the experimental investigation and characterization of biodiesel derived from Aregmone ochroleuca, a plant known for its oil‐rich seeds and also the production of biodiesel from argemone oil, methanol, and potassium hydroxide catalysis through transesterification methods. The experimental run on argemone seed oil, focusing on the effect of particle size on oil extraction yield and physicochemical properties of crude oil. The oil was pretreated with sulfuric acid to reduce its acid value. The physicochemical properties of biodiesel were compared with ASTM and EU standards, and it was found that a good correlation between experimental results and biodiesel standards was expected. The maximum seed oil yield of Argemone ochroleuca was obtained by Soxhlet extraction from a smaller particle size of ripe seeds, yielding 38.05%. The oil's yellowish color and slightly transparent liquid with a refreshing and pleasant odor indicate its freshness and flavor quality. Including acid value, free fatty acid, saponification value, specific gravity, density, kinetics viscosity, and ash content, the physicochemical properties of the oil were determined.
- Open Access
- 1 January 2025
- Published by CSIR-National Institute of Science Communication and Policy Research (NIScPR) in Indian Journal of Chemical Technology
- Vol. 32 (6) , 755-765
Refining of used engine oil by solvent extraction and adsorption processes: A circular economy strategy
To address the issues related to lubricating oil used in vehicles, present study is aimed to investigate the characterization of waste engine oil and its treatment using solvent extraction and adsorption methods. The motor oil sample used has been treated with different solvents and solvent ratios to analyze the effect of solvent type and oil-solvent ratio on sludge removal, density, and ash content. The results showed that methanol-based treatment at a 1:3 oil-solvent ratio gave the best-refined oil, with a maximum sludge removal of 54% and a significantly lower density (0.874 g/ml) and ash content (0.54%). Additionally, the study employed adsorption as a further purification method, and the results indicated that an adsorbent dosage of 2.5 g per 50 ml of solvent-extracted oil at a temperature of 60°C gave the best-refined oil, with a 99% removal of metals as contaminants. The waste and treated engine oil have been characterized using various parameters, including density, viscosity, flash point, ash content, water content, and metal contents. The results indicated that the treated oil had comparable quality to the virgin oil, with a density of 0.871 g/mL, flash point of 210 °C, and ash content of <0.1%. The study's findings suggest that the solvent extraction and adsorption methods can be effective in removing contaminants from used engine oil, producing a refined oil of comparable quality to virgin oil. This study significantly impacts Ethiopia's environmental pollution reduction and energy conservation.
- 1 January 2025
- Published by CSIR-National Institute of Science Communication and Policy Research (NIScPR) in Indian Journal of Chemical Technology
- Vol. 32 (6) , 755-765
Open AccessRefining of used engine oil by solvent extraction and adsorption processes: A circular economy strategy
To address the issues related to lubricating oil used in vehicles, present study is aimed to investigate the characterization of waste engine oil and its treatment using solvent extraction and adsorption methods. The motor oil sample used has been treated with different solvents and solvent ratios to analyze the effect of solvent type and oil-solvent ratio on sludge removal, density, and ash content. The results showed that methanol-based treatment at a 1:3 oil-solvent ratio gave the best-refined oil, with a maximum sludge removal of 54% and a significantly lower density (0.874 g/ml) and ash content (0.54%). Additionally, the study employed adsorption as a further purification method, and the results indicated that an adsorbent dosage of 2.5 g per 50 ml of solvent-extracted oil at a temperature of 60°C gave the best-refined oil, with a 99% removal of metals as contaminants. The waste and treated engine oil have been characterized using various parameters, including density, viscosity, flash point, ash content, water content, and metal contents. The results indicated that the treated oil had comparable quality to the virgin oil, with a density of 0.871 g/mL, flash point of 210 °C, and ash content of <0.1%. The study's findings suggest that the solvent extraction and adsorption methods can be effective in removing contaminants from used engine oil, producing a refined oil of comparable quality to virgin oil. This study significantly impacts Ethiopia's environmental pollution reduction and energy conservation.
- Open Access
- 1 January 2025
- Published by Wiley in International Journal of Chemical Engineering
- Vol. 2025 (1)
Design of Biogas Generation, Purification, and Compression System: Conversion of Municipal Solid Waste to Green Energy in Bahir Dar City
As part of the design of a biogas generation, purification, and compression system for Bahir Dar City’s municipal solid waste use, organic waste could be collected and treated in an anaerobic digester to produce biogas, which could then be compressed for use or storage after being purified to remove contaminants like carbon dioxide, hydrogen sulfide, moisture, and other pollutants. This approach could help the city implement a more sustainable waste management plan, produce renewable energy, and reduce waste output. Collaboration with experts in gas purification, waste management, and comprehensive Bahir Dar City station systems would be essential for the successful implementation of this design work. This project included the design and sizing of a fixed‐dome biogas digester, biogas purification, and a detailed plant schematic, as well as data on Bahir Dar’s waste potential. A locking system was not taken into consideration when developing the digesters because they were built on a wet base with a biomass‐to‐water ratio of 1:1, which maximizes biogas output in continuous mode as opposed to batch type. Various purification unit operation strategies are used to purify the undesirable gases after the digester produces biogas. In order to create fuel with a higher calorific value, biogas purification increases the amount of methane in the gas. Compressing the cleaned biogas would raise its energy density for transit and storage.
- 1 January 2025
- Published by Wiley in International Journal of Chemical Engineering
- Vol. 2025 (1)
Open AccessDesign of Biogas Generation, Purification, and Compression System: Conversion of Municipal Solid Waste to Green Energy in Bahir Dar City
As part of the design of a biogas generation, purification, and compression system for Bahir Dar City’s municipal solid waste use, organic waste could be collected and treated in an anaerobic digester to produce biogas, which could then be compressed for use or storage after being purified to remove contaminants like carbon dioxide, hydrogen sulfide, moisture, and other pollutants. This approach could help the city implement a more sustainable waste management plan, produce renewable energy, and reduce waste output. Collaboration with experts in gas purification, waste management, and comprehensive Bahir Dar City station systems would be essential for the successful implementation of this design work. This project included the design and sizing of a fixed‐dome biogas digester, biogas purification, and a detailed plant schematic, as well as data on Bahir Dar’s waste potential. A locking system was not taken into consideration when developing the digesters because they were built on a wet base with a biomass‐to‐water ratio of 1:1, which maximizes biogas output in continuous mode as opposed to batch type. Various purification unit operation strategies are used to purify the undesirable gases after the digester produces biogas. In order to create fuel with a higher calorific value, biogas purification increases the amount of methane in the gas. Compressing the cleaned biogas would raise its energy density for transit and storage.
- Open Access
- 1 January 2025
- Published by Wiley in Journal of Engineering
- Vol. 2025 (1)
Animal‐Free Leather‐Like Material From Pineapple Leaf Fiber Enhanced With Turmeric Dyeing: A Sustainable Alternative to Leather
This study introduces a sustainable, animal‐free leather alternative derived from pineapple leaf fiber (PALF) and enhanced with natural turmeric dyeing. Addressing the environmental challenges posed by conventional leather production—such as high water usage, toxic chemical discharge, and reliance on animal hides—this research utilizes agricultural waste materials and eco‐friendly processing to fabricate bio‐based leather‐like materials. Polyvinyl alcohol (PVA) was employed as a film‐forming matrix to support structure, while polylactic acid (PLA) served as a biodegradable binder, reinforcing the composite’s strength and flexibility. Turmeric dyeing contributed antimicrobial functionality and vibrant coloration, enhancing the material’s appeal and safety. The process avoided petroleum‐based binders or synthetic additives, supporting a fully bio‐based, eco‐friendly approach. A Box–Behnken experimental design was applied to optimize key formulation parameters, including PVA concentration, PALF ratio, and PLA binder content. The optimized sample exhibited a tensile strength of 159 N and tear strength of 45 N, demonstrating mechanical performance suitable for lightweight applications such as fashion accessories and leather goods. The findings highlight the potential of PALF‐based materials as an eco‐friendly alternative to traditional leather, combining circular economy principles with functional performance.
- 1 January 2025
- Published by Wiley in Journal of Engineering
- Vol. 2025 (1)
Open AccessAnimal‐Free Leather‐Like Material From Pineapple Leaf Fiber Enhanced With Turmeric Dyeing: A Sustainable Alternative to Leather
This study introduces a sustainable, animal‐free leather alternative derived from pineapple leaf fiber (PALF) and enhanced with natural turmeric dyeing. Addressing the environmental challenges posed by conventional leather production—such as high water usage, toxic chemical discharge, and reliance on animal hides—this research utilizes agricultural waste materials and eco‐friendly processing to fabricate bio‐based leather‐like materials. Polyvinyl alcohol (PVA) was employed as a film‐forming matrix to support structure, while polylactic acid (PLA) served as a biodegradable binder, reinforcing the composite’s strength and flexibility. Turmeric dyeing contributed antimicrobial functionality and vibrant coloration, enhancing the material’s appeal and safety. The process avoided petroleum‐based binders or synthetic additives, supporting a fully bio‐based, eco‐friendly approach. A Box–Behnken experimental design was applied to optimize key formulation parameters, including PVA concentration, PALF ratio, and PLA binder content. The optimized sample exhibited a tensile strength of 159 N and tear strength of 45 N, demonstrating mechanical performance suitable for lightweight applications such as fashion accessories and leather goods. The findings highlight the potential of PALF‐based materials as an eco‐friendly alternative to traditional leather, combining circular economy principles with functional performance.
- Open Access
- 1 January 2025
- Published by Wiley in Journal of Engineering
- Vol. 2025 (1)
Improving the Performance of the Current Cook Stove to Realize Ethiopia’s Sustainable Development Goals
Ethiopia’s Sustainable Development Goals (SDGs) can be greatly aided by improving cook stove performance because it will increase energy efficiency, lessen indoor air pollution, and reduce deforestation. This study evaluated the new stove using a comparative analysis with the current Mirt stove, considering its thermal efficiency, specific fuel consumption, cooking time, and pollution reduction. The conventional water boiling and control cooking experiments were carried out using eucalyptus wood as fuel, yielding insightful results about the new stove’s performance. Notably, the new stove’s double‐wall construction and use of flue gas as an insulator resulted in notable advancements. With the new stove attaining a thermal efficiency of 28.42% as opposed to the Mirt stove’s 23.47%, there was a noticeable gain in combustion efficiency of 7.47%. Additionally, there was a 7.21% drop in the specific fuel consumption and a 5.55% rise in the firepower produced in the combustion chamber. The new stove showed a time savings of 12.15% in every injera baking activity, reducing the cooking time, which is one of the most significant results. One kilogram of injera took an average of 3.92 min to bake on the new, better stove, as opposed to 4.41 min on the Mirt stove. In addition, compared to the Mirt stove, the injera quality examination showed a 2.8% improvement in moisture content, consistency, and general sensory qualities. Apart from these improved performance gains, the new stove’s fuel savings are expected to result in a considerable reduction of greenhouse gas emissions, amounting to 0.198 t CO 2 /year. This highlights the wider environmental and sustainability advantages of the upgraded injera baking stove.
- 1 January 2025
- Published by Wiley in Journal of Engineering
- Vol. 2025 (1)
Open AccessImproving the Performance of the Current Cook Stove to Realize Ethiopia’s Sustainable Development Goals
Ethiopia’s Sustainable Development Goals (SDGs) can be greatly aided by improving cook stove performance because it will increase energy efficiency, lessen indoor air pollution, and reduce deforestation. This study evaluated the new stove using a comparative analysis with the current Mirt stove, considering its thermal efficiency, specific fuel consumption, cooking time, and pollution reduction. The conventional water boiling and control cooking experiments were carried out using eucalyptus wood as fuel, yielding insightful results about the new stove’s performance. Notably, the new stove’s double‐wall construction and use of flue gas as an insulator resulted in notable advancements. With the new stove attaining a thermal efficiency of 28.42% as opposed to the Mirt stove’s 23.47%, there was a noticeable gain in combustion efficiency of 7.47%. Additionally, there was a 7.21% drop in the specific fuel consumption and a 5.55% rise in the firepower produced in the combustion chamber. The new stove showed a time savings of 12.15% in every injera baking activity, reducing the cooking time, which is one of the most significant results. One kilogram of injera took an average of 3.92 min to bake on the new, better stove, as opposed to 4.41 min on the Mirt stove. In addition, compared to the Mirt stove, the injera quality examination showed a 2.8% improvement in moisture content, consistency, and general sensory qualities. Apart from these improved performance gains, the new stove’s fuel savings are expected to result in a considerable reduction of greenhouse gas emissions, amounting to 0.198 t CO 2 /year. This highlights the wider environmental and sustainability advantages of the upgraded injera baking stove.
- Open Access
- 1 January 2025
- Published by Wiley in International Journal of Chemical Engineering
- Vol. 2025 (1)
Optimizing Rumen Fluid Inoculation for Enhanced Biogas Production Using Organic Waste Codigestion
Rumen fluid’s extensive microbial community, which contains a variety of anaerobic microbes that can decompose complex organic materials, makes it very beneficial for increasing the production of biogas. Current biogas production methods often face challenges such as insufficient methane yield and slow degradation rates, primarily due to limitations in microbial diversity and activity within the anaerobic digestion process. The use of rumen fluid as an inoculum addresses these limitations by introducing a rich diversity of anaerobic microorganisms that are naturally adapted to break down complex organic materials more efficiently. Enhancement of biogas production from organic wastes by adding rumen fluid influences the synergistic microbial communities present in the fluid, which are highly effective at breaking down complex organic materials. Rumen fluid contains various microorganisms, including bacteria, protozoa, and fungi that facilitate anaerobic digestion, improving the degradation of organic solids and increasing biogas yield. The objective of the study is to enhance biogas production using rumen fluid as a microbial inoculum during the codigestion of organic wastes. The study focused on optimizing rumen fluid amount for better biogas production during fermentation reaction with cow manure and formulating the best mixes of fruit and vegetable wastes with cow manure for codigestion. The biogas pressure was read using a pressure gauge, and the produced biogas was collected for further analysis. The physiochemical analysis revealed that cow manure and FVW had the highest percentages of organic carbon and volatile solids, which directly contribute to biogas production. The best level of rumen fluid inoculum was found for a 20‐L fermenter, with 7.5 L being an adequate level for a 20‐L reactor. The study shows the importance of biogas production using locally available wastes to subsidize energy demand, remove unwanted waste, and produce a healthy environment.
- 1 January 2025
- Published by Wiley in International Journal of Chemical Engineering
- Vol. 2025 (1)
Open AccessOptimizing Rumen Fluid Inoculation for Enhanced Biogas Production Using Organic Waste Codigestion
Rumen fluid’s extensive microbial community, which contains a variety of anaerobic microbes that can decompose complex organic materials, makes it very beneficial for increasing the production of biogas. Current biogas production methods often face challenges such as insufficient methane yield and slow degradation rates, primarily due to limitations in microbial diversity and activity within the anaerobic digestion process. The use of rumen fluid as an inoculum addresses these limitations by introducing a rich diversity of anaerobic microorganisms that are naturally adapted to break down complex organic materials more efficiently. Enhancement of biogas production from organic wastes by adding rumen fluid influences the synergistic microbial communities present in the fluid, which are highly effective at breaking down complex organic materials. Rumen fluid contains various microorganisms, including bacteria, protozoa, and fungi that facilitate anaerobic digestion, improving the degradation of organic solids and increasing biogas yield. The objective of the study is to enhance biogas production using rumen fluid as a microbial inoculum during the codigestion of organic wastes. The study focused on optimizing rumen fluid amount for better biogas production during fermentation reaction with cow manure and formulating the best mixes of fruit and vegetable wastes with cow manure for codigestion. The biogas pressure was read using a pressure gauge, and the produced biogas was collected for further analysis. The physiochemical analysis revealed that cow manure and FVW had the highest percentages of organic carbon and volatile solids, which directly contribute to biogas production. The best level of rumen fluid inoculum was found for a 20‐L fermenter, with 7.5 L being an adequate level for a 20‐L reactor. The study shows the importance of biogas production using locally available wastes to subsidize energy demand, remove unwanted waste, and produce a healthy environment.
- 6 December 2024
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 44 (1)
Evaluation of biomass‐based cook stoves in Ethiopia: A transition strategy from conventional to modern cook stoves
Performance improvement of cookstoves has a vital role in reducing indoor air pollution and deforestation. In this study, biomass‐based cook stoves onsite data survey and experimental approaches were carried out to evaluate the performance of different cook stoves. Based on this feasibility research, it was shown that firewood accounted for 75% of the fuel type usage. The results of several studies and experimental performance testing indicated that the efficiency of cook stoves for 3‐stone, lakech, mirt, gonze, tikikil, and pyrolysis stoves was 10%, 25%, 48%, 50%, and 76%, respectively. Merely 87 out of the total 1986 families with kebeles had improved cookstoves; the remaining households used 3‐stone stove types. According to the study, the pyrolysis stove had the lowest fuel consumption rate and cooking time, while the 3‐stone stove had the greatest fuel consumption rate and cooking time. The improvement stove reduced emissions, and the highest emission reduction stove was the gasifier stove, with a magnitude of 1.229 tons CO2/HH/Year. Among cooking stoves, gasifier stoves have a great advantage in producing energy and biochar.
- 6 December 2024
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 44 (1)
Evaluation of biomass‐based cook stoves in Ethiopia: A transition strategy from conventional to modern cook stoves
Performance improvement of cookstoves has a vital role in reducing indoor air pollution and deforestation. In this study, biomass‐based cook stoves onsite data survey and experimental approaches were carried out to evaluate the performance of different cook stoves. Based on this feasibility research, it was shown that firewood accounted for 75% of the fuel type usage. The results of several studies and experimental performance testing indicated that the efficiency of cook stoves for 3‐stone, lakech, mirt, gonze, tikikil, and pyrolysis stoves was 10%, 25%, 48%, 50%, and 76%, respectively. Merely 87 out of the total 1986 families with kebeles had improved cookstoves; the remaining households used 3‐stone stove types. According to the study, the pyrolysis stove had the lowest fuel consumption rate and cooking time, while the 3‐stone stove had the greatest fuel consumption rate and cooking time. The improvement stove reduced emissions, and the highest emission reduction stove was the gasifier stove, with a magnitude of 1.229 tons CO2/HH/Year. Among cooking stoves, gasifier stoves have a great advantage in producing energy and biochar.
- Open Access
- 31 May 2024
- Published by Springer Nature in Research Square
Mitigation of Forestation using Fuel-Saving Appliances
In this study, appropriate energy-saving cooking technologies were identified via comparison with traditional cooking technologies in the study area, Zenzelima Kebele, Amhara region, Ethiopia. Primary and secondary data were collected through different data collection tools, such as interviews, questionnaires, observation, and focus group discussion (FGD), and compiled reports were also reviewed as secondary data. For this observation, the sample size was taken as 60 households in the kebele. From this feasibility study, it was determined that the dominant fuel type was firewood, for which the percentage was 75%. According to the results of experimental performance tests and different research reviews, the efficiency of cookstoves was 10%, 25%, 48%, 50%, 54%, and 76% for 3-stone, lakech, mirt, gonze, tikikil, and pyrolysis stoves, respectively. From the total number of households with kebeles, i.e., 1986 households, only 87 households used improved cook stoves, and the rest used 3-stone stove types. The study showed that the highest fuel consumption rate and cooking time were observed for the 3-stone stove, and the lowest fuel consumption rate and cooking time were observed for the pyrolysis stove. The improvement stove reduced emissions, and the highest emission reduction stove was the gasifier stove, with a magnitude of 1.229 tons CO2/HH/Year. The majority of the societies did not utilize the biochar from the cook stoves. However, biochar is very important for soil amendment. Among cooking stoves, gasifier stoves have a great advantage in terms of the production of energy and biochar. The statistical analysis indicated that fuel consumption and cooking time are linearly related.
- 31 May 2024
- Published by Springer Nature in Research Square
Open AccessMitigation of Forestation using Fuel-Saving Appliances
In this study, appropriate energy-saving cooking technologies were identified via comparison with traditional cooking technologies in the study area, Zenzelima Kebele, Amhara region, Ethiopia. Primary and secondary data were collected through different data collection tools, such as interviews, questionnaires, observation, and focus group discussion (FGD), and compiled reports were also reviewed as secondary data. For this observation, the sample size was taken as 60 households in the kebele. From this feasibility study, it was determined that the dominant fuel type was firewood, for which the percentage was 75%. According to the results of experimental performance tests and different research reviews, the efficiency of cookstoves was 10%, 25%, 48%, 50%, 54%, and 76% for 3-stone, lakech, mirt, gonze, tikikil, and pyrolysis stoves, respectively. From the total number of households with kebeles, i.e., 1986 households, only 87 households used improved cook stoves, and the rest used 3-stone stove types. The study showed that the highest fuel consumption rate and cooking time were observed for the 3-stone stove, and the lowest fuel consumption rate and cooking time were observed for the pyrolysis stove. The improvement stove reduced emissions, and the highest emission reduction stove was the gasifier stove, with a magnitude of 1.229 tons CO2/HH/Year. The majority of the societies did not utilize the biochar from the cook stoves. However, biochar is very important for soil amendment. Among cooking stoves, gasifier stoves have a great advantage in terms of the production of energy and biochar. The statistical analysis indicated that fuel consumption and cooking time are linearly related.
- Open Access
- 21 May 2024
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 59
Investigation of optimal drying conditions of red chili peppers in a hot air cabinet dryer
- 21 May 2024
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 59
Open AccessInvestigation of optimal drying conditions of red chili peppers in a hot air cabinet dryer